A low-dimensional subsurface model for saturated and unsaturated flow processes: ability to address heterogeneity

A low-dimensional model that describes both saturated and unsaturated flow processes in a single equation is presented. Subsurface flow processes in the groundwater, the vadose zone, and the capillary fringe are accounted for through the computation of aggregated hydrodynamic parameters that result from the integration of the governing flow equations from the bedrock to the land surface. The three-dimensional subsurface flow dynamics are thus described by a two-dimensional equation, allowing for a drastic reduction of model unknowns and simplification of the model parameterizations. This approach is compared with a full resolution of the Richards equation in different synthetic test cases. Because the model reduction stems from the vertical integration of the flow equations, the test cases all use different configurations of heterogeneity for vertical cross-sections of a soil-aquifer system. The low-dimensional flow model shows strong consistency with results from a complete resolution of the Richards equation for both the water table and fluxes. The proposed approach is therefore well suited to the accurate reproduction of complex subsurface flow processes.     

3d transition metal L-edge X-ray absorption studies of the dichalcogenides of Fe, Co and Ni

The X-ray absorption spectra of the transition metal L_3,2-edges of the dichalcogenides FeS₂ (pyrite), FeSe₂, FeTe₂, CoS₂, CoSe₂, CoTe₂, NiS₂, NiSe₂ and NiTe₂ have been studied. These spectra are compared with theoretical simulations make using the atomic multiplet approach assuming on octahedral site for the metal atoms. The Ni spectra can be closely simulated using this approach but the Fe and Co spectra show less good fits to the experimental data. The reasons for this and its implications for the use of L-edge spectra in the study of such minerals are discussed in terms of the covalency and the ground states of the compounds; these results indicate the mixing of the ground states increases in the order Ni<Co<Fe.     

Enter the working forest: Discourse analysis in the Northern Forest

In 1988, four states in the northeastern USA commissioned a study to address land use changes in the Northern Forest, 26 million acres of temperate and boreal forest extending from Maine to eastern New York State. Against a backdrop of economic destabilization and concerns regarding social and ecological implications of a real estate boom, the sustained deliberative dialogue catalyzed by this study has come to rely heavily on the ambiguous concept of “working forest.” To clarify political and environmental dynamics in the region, we analyzed how people respond to and seek to capitalize on the interpretive flexibility of the term working forest. We combine an analysis of socio-political discourses of working forest based on a structured literature review with an assessment of local peoples’ definitions of working forest based on a survey conducted in a pair of contrasting New York State communities. The first study site represents an amenity-oriented community (i.e. a place where the forest supports a service economy including recreation and tourism) and the other study site represents a timber-dependent community. By linking data from community-level analysis to data derived from a general analysis of forest politics, we seek to develop a more robust perspective. By comparing discourses across differently structured communities, we investigate how local forest politics are mediated by local economic development processes. Our study empirically illustrates contested and geographically uneven processes of social construction of environment and rural development in a region confronting pressures of globalization. Results indicate that timber harvesting is a heavily privileged management objective, as a logic of ‘the forest that pays is the forest that stays’ dominates. Environmental politics in the region, and perhaps more generally, increasingly conforms to a form of pragmatism in which economic opportunities structure conservation planning and investment.     

Thermomechanical properties of deep argillaceous formations

A difficulty in the interpretation of mechanical and thermo-mechanical tests on specimens drawn from large argillaceous formations is the strong inhomogeneity of void ratio, clay minerals and carbonates content.

In this paper a relationship is developed to link strength and the maximum preconsolidation stress to the initial void ratio and carbonate content. Compressibility is also correlated to carbonates.

Thermal strains in drained and undrained conditions for a Spanish, a belgian and an Italian natural clay are compared. In the elastic state strains are comparable, while in the plastic range thermal strains are highest for the Belgian clay, lower in the Spanish cemented clay and lowest in the Italian clay, very stiff and cemented.     

Dependence of the types of coasts and coastal eolian relief on the variations of the sea level using the example of the Caspian Sea

In this work, the history of the development of the Turali area (the Dagestan coast of the Caspian Sea) in the Late Holocene is under consideration. The analysis of the geological structure of the bay bar that separates the Bolshoy Turali lagoon from the sea, the granulometric analysis of the coastal deposits, and the data of geo-radar profiles make it possible to assert that the large eolian relief forms were formed during the New Caspian (Novokaspiyskoe) transgression of the Caspian Sea.     

Could CoRoT-7b and Kepler-10b be remnants of evaporated gas or ice giants?

We present thermal mass loss calculations over evolutionary time scales for the investigation if the smallest transiting rocky exoplanets CoRoT-7b (∼1.68R_Earth) and Kepler-10b (∼1.416R_Earth) could be remnants of an initially more massive hydrogen-rich gas giant or a hot Neptune-class exoplanet. We apply a thermal mass loss formula which yields results that are comparable to hydrodynamic loss models. Our approach considers the effect of the Roche lobe, realistic heating efficiencies and a radius scaling law derived from observations of hot Jupiters. We study the influence of the mean planetary density on the thermal mass loss by placing hypothetical exoplanets with the characteristics of Jupiter, Saturn, Neptune, and Uranus to the orbital location of CoRoT-7b at 0.017 AU and Kepler-10b at 0.01684 AU and assuming that these planets orbit a K- or G-type host star. Our findings indicate that hydrogen-rich gas giants within the mass domain of Saturn or Jupiter cannot thermally lose such an amount of mass that CoRoT-7b and Kepler-10b would result in a rocky residue. Moreover, our calculations show that the present time mass of both rocky exoplanets can be neither a result of evaporation of a hydrogen envelope of a “Hot Neptune” nor a “Hot Uranus”-class object. Depending on the initial density and mass, these planets most likely were always rocky planets which could lose a thin hydrogen envelope, but not cores of thermally evaporated initially much more massive and larger objects.     

The interaction of surface waves in the presence of wind

Zakharov's equation is applied to study numerically the evolution of wave amplitudes. It is demonstrated that, owing to Krasitskii's new kernel functions, the system of surface waves remains Hamiltonian, in contrast to the former approaches used by Yuen, Lake, and Zakharov. If surface waves are wind-generated, they grow and become stochastic. If the effect of the waves on the wind is considered, then the wave amplitude evolution, similar to the no-wind case, continues to be recurrent. Translated by Vladimir A. Puchkin.     

Error analysis of integrated water vapor measured by СIMEL photometer

Water vapor plays a key role in weather and climate forming, which leads to the need for continuous monitoring of its content in different parts of the Earth. Intercomparison and validation of different methods for integrated water vapor (IWV) measurements are essential for determining the real accuracies of these methods. CIMEL photometers measure IWV at hundreds of ground-based stations of the AERONET network. We analyze simultaneous IWV measurements performed by a CIMEL photometer, an RPG-HATPRO MW radiometer, and a FTIR Bruker 125-HR spectrometer at the Peterhof station of St. Petersburg State University. We show that the CIMEL photometer calibrated by the manufacturer significantly underestimates the IWV obtained by other devices. We may conclude from this intercomparison that it is necessary to perform an additional calibration of the CIMEL photometer, as well as a possible correction of the interpretation technique for CIMEL measurements at the Peterhof site.