Directional dependence of P- and S-wave propagation and polarization in foliated rocks from the Kola superdeep well: Evidence from laboratory measurements and calculations based on TOF neutron diffraction

We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.     

Microcrack networks in granite affected by a fault zone: Visualization by confocal laser scanning microscopy

Microcracks in the Cretaceous Ryoke-type granite in Japan were investigated by using deep drilling core samples collected in the Mizunami Underground Research Project of the Japan Nuclear Cycle Development Institute (JNC). The granite body suffered brittle deformation associated with Tertiary thrust movement. Based on core-scale and microscopic deformation features, the drill core from a depth of 300 to 700 m is divided into four domains, i.e. (A) undeformed granite, (B) granite intruded by cataclastic seams, (C) fractured granite in the fault damage zone, and (D) foliated cataclasite at the fault center. To characterize microcrack geometries in each domain, we employed the impregnation method using a low-viscous acrylic resin doped with fluorescent agents and captured the microcrack images by confocal laser scanning microscopy (CLSM). The CLSM image in the fault damage zone revealed anisotropic development of microcrack networks related to the fault movement. Both CLSM observation and porosity measurements reveal a drastic increase of micro-pores in the foliated cataclasite, possibly caused by fragmentation, and granulation and crack sealing in the fault zone.     

Hydrothermal bitumen generated from sedimentary organic matter of rift lakes – Lake Chapala, Citala Rift, western Mexico

Lake Chapala is in the Citala Rift of western Mexico, which in association with the Tepic-Zacoalco and Colima Rifts, form the well-known neotectonic Jalisco continental triple junction. The rifts are characterized by evidence for both paleo- and active hydrothermal activity. At the south shore of the lake, near the Los Gorgos sublacustrine hydrothermal field, there are two tar emanations that appear as small islands composed of solid, viscous and black bitumen. Aliquots of tar were analyzed by GC-MS and the mixtures are comprised of geologically mature biomarkers and an UCM. PAH and n-alkanes are not detectable. The biomarkers consist mainly of hopanes, gammacerane, tricyclic terpanes, carotane and its cracking products, steranes, and drimanes. The biomarker composition and bulk C isotope composition (δ¹³C = −21.4%) indicate an organic matter source from bacteria and algae, typical of lacustrine ecosystems. The overall composition of these tars indicates that they are hydrothermal petroleum formed from lacustrine organic matter in the deeper sediments of Lake Chapala exceeding 40 ka (¹⁴C) in age and then forced to the lakebed by tectonic activity. The absence of alkanes and the presence of an UCM with mature biomarkers are consistent with rapid hydrothermal oil generation and expulsion at temperatures of 200–250 °C. The occurrence of hydrothermal petroleum in continental rift systems is now well known and should be considered in future energy resource exploration in such regions.     

Geochemical characteristics of mineral air particles emitted inside a clay atomisation plant which introduces waste recycling processes

The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation.     

Retrofit-reinforcement of cohesive soil slopes using high strength geotextiles with drainage capability

A series of geotechnical centrifuge physical modeling tests were performed to assess the potential use of a new cost-effective mechanically stabilized earth system for retrofitting marginally stable cohesive slopes. The proposed system utilizes the dual functions of reinforcement and drainage by directly inserting high strength non-woven geotextile strips into slopes, with little or no excavation required behind the slope face. The system significantly increases the factor of safety of potentially unstable cohesive slopes, and can be constructed at less expense and more rapidly than conventional mechanically stabilized earth systems.     

Magmatic zircon oxygen isotopes of 1.88–1.87 Ga orogenic and 1.65–1.54 Ga anorogenic magmatism in Finland

Summary Oxygen isotope ratios of igneous zircon from magmatic rocks in Finland provide insights into the evolution and growth of the Precambrian crust during the Svecofennian orogeny. These data preserve magmatic δ¹⁸O values and correlate with major discontinuities in the lower crust. Oxygen isotope ratios of zircon across the 1.88–1.87 Ga Central Finland granitoid complex (CFGC) range from 5.50‰ to 6.84‰, except for three plutons in contact with the adjacent greenstone and metasedimentary belts (δ¹⁸O(Zrc) = 7.60‰–7.78‰). There is a systematic variation in δ¹⁸O(Zrc) with respect to geographic location in the CFGC, ranging from 6.60±0.23‰ (σ) in the northeast to 5.90±0.40‰ in the west-southwest. These values correlate with a change in crustal thickness and shift in geochemical composition. The oxygen isotope composition of the 1.65–1.54 Ga rapakivi granites and related rocks in southern Finland show a decreasing trend from north to south, independent of their emplacement age. The southern anorogenic granite group has an average δ¹⁸O in zircon of 6.14±0.07‰ and the northern anorogenic group has an average δ¹⁸O in zircon of 8.14±0.59‰. This difference reflects the boundary between island arc terrains accreted during the Paleoproterozoic. Deceased