Grampian migmatites in the Buchan Block,NE Scotland

Rocks exposed along the Scottish coast between Fraserburgh and Inzie Head contain information critical to understanding the evolution of the Buchan Block, the type locality for low‐P, high‐T regional metamorphism, and its relationship with the rest of the Grampian terrane, one of the major tectonostratigraphic components of the Scottish Caledonides. The ~8 km long section traverses a regional network of shear zones and, at the highest grades around Inzie Head, passes into the core of the Buchan Anticline, a large‐scale open fold that is commonly regarded as a late structure, post‐dating metamorphism. The metasedimentary rocks increase in grade from upper amphibolite to granulite facies and preserve unequivocal evidence for partial melting. The diatexite migmatites around Inzie Head, along with other gneissose units within the Buchan Block, have been regarded as allochthonous Precambrian basement rocks that were thrust into their current position during the Grampian orogenesis. However, field observations show that the onset of in situ partial melting in metapelitic rocks, which was associated with the formation of garnet‐bearing aplites and associated pegmatites, occurred around Fraserburgh, where shear fabrics are absent. Thus, the rocks preserve a continuous metamorphic field gradient that straddles the shear zone network. This observation supports an alternative interpretation that anatexis was the result of mid‐Ordovician (Grampian) metamorphism, rather than an older tectonothermal event, and that the Inzie Head gneisses are autochthonous. Using an average mid‐Dalradian pelite as a plausible representative protolith, phase equilibria modelling satisfactorily reproduces the observed appearance and disappearance of key minerals providing that peritectic garnet produced with the first formed melts (represented by the garnet‐bearing aplites) depleted the source rocks in Mn. The modelled metamorphic field gradient records a temperature increase of at least 150 °C (from ~650 °C near Fraserburgh to in excess of 800 °C at Inzie Head) but is isobaric at pressures of 2.7–2.8 kbar, suggesting the Buchan Anticline developed synchronous with partial melting. The Buchan Anticline is likely an expression of crustal thinning and asthenospheric upwelling, which produced voluminous gabbroic intrusions that supplied the heat for Buchan metamorphism.     

Aqueous alteration of the Bali CV3 chondrite: evidence from mineralogy, mineral chemistry, and oxygen isotopic compositions

A petrographic, geochemical, and oxygen isotopic study of the Bali CV3 carbonaceous chondrite revealed that the meteorite has undergone extensive deformation and aqueous alteration on its parent body. Deformation textures are common and include flattened chondrules, a well-developed foliation, and the presence of distinctive (100) planar defects in olivine. The occurrence of alteration products associated with the planar defects indicates that the deformation features formed prior to the episode of aqueous alteration. The secondary minerals produced during the alteration event include well-crystallized Mg-rich saponite, framboidal magnetite, and Ca-phosphates. The alteration products are not homogeneously distributed throughout the meteorite, but occur in regions adjacent to relatively unaltered material, such as veins of altered material following the foliation. The alteration assemblage formed under oxidizing conditions at relatively low temperatures (<100 degrees C). Altered regions in Bali have higher Na, Ca, and P contents than unaltered regions which suggests that the fluid phase carried significant dissolved solids. Oxygen isotopic compositions for unaltered regions in Bali fall within the field for other CV3 whole-rocks, however, the oxygen isotopic compositions of the heavily altered material lie in the region for the CM and CR chondrites. The heavy-isotope enrichment of the altered regions in Bali suggest alteration conditions similar to those for the petrographic type-2 carbonaceous chondrites.     

Paleomonsoon precipitation deduced from a sediment core from the equatorial Indian Ocean

Rapid shifts in past climate recorded in polar ice sheets have elicited various explanations relating to either thermohaline circulation changes by ice-rafting or natural greenhouse gas concentrations modulated by climatic conditions in the tropics. To compare the tropical paleoclimate record with the polar record, one must choose sediment cores from highly productive ocean regions. Necessarily, such regions reflect the wind records in the tropics, because high productivity is associated with upwelling driven by winds. Comparing tropical precipitation records with high-latitude records is, however, a more difficult task because sediments recording paleoprecipitation usually have low sedimentation rates, and offer coarser resolution relative to polar ice cores. Here, we present δ ¹⁸O data of three planktonic species of Foraminifera (a proxy for precipitation) from such a sediment core, spanning the past 35 ka for the equatorial Indian Ocean, which falls under the southwest monsoon (SWM) realm. Results show that minimum SWM precipitation occurred at the Last Glacial Maximum, with a subsequent increase at Termination IA. During the Holocene, SWM precipitation intensified uniformly up to the core top (∼2.2 ka b.p.), as revealed by generally decreasing δ ¹⁸O values. Variations in precipitation are consistent with climate changes recorded in polar ice sheets. Although the different resolutions of the two records preclude a rigorous comparison, abrupt cooling/warming events appear to be accompanied by sudden reduction/enhancement in (SWM) rainfall. Thus, mechanisms with time scales much shorter than a millennium, such as natural greenhouse warming (e.g., CH₄ concentration), controlled by emissions from the tropics, could have played a major role in high-latitude climate change.     

Carbonaceous chondrites as analogs for the composition and alteration of Ceres

The mineralogy and geochemistry of Ceres, as constrained by Dawn's instruments, are broadly consistent with a carbonaceous chondrite (CM/CI) bulk composition. Differences explainable by Ceres’s more advanced alteration include the formation of Mg‐rich serpentine and ammoniated clay; a greater proportion of carbonate and lesser organic matter; amounts of magnetite, sulfide, and carbon that could act as spectral darkening agents; and partial fractionation of water ice and silicates in the interior and regolith. Ceres is not spectrally unique, but is similar to a few other C‐class asteroids, which may also have suffered extensive alteration. All these bodies are among the largest carbonaceous chondrite asteroids, and they orbit in the same part of the Main Belt. Thus, the degree of alteration is apparently related to the size of the body. Although the ammonia now incorporated into clay likely condensed in the outer nebula, we cannot presently determine whether Ceres itself formed in the outer solar system and migrated inward or was assembled within the Main Belt, along with other carbonaceous chondrite bodies.     

Transfort of oxygen,nutrients and carbonates by the Kuroshio Current

Measured concentrations of dissolved oxygen, phosphate, silicate, total alkalinity and calculated total CO₂ in a section between 121° E and 125° E across the Kuroshio near 22° N off Taiwan and the geostrophic velocity were used to estimate the gross transport of oxygen, nutrients and carbonates. The flux of dissolved oxygen is 6.7×10⁶ mol/s northward and 0.9×10⁶ mol/s southward. The net flux equals 5.8×10⁶ mol/s down-stream. The northward flux of phosphate is 22.6×10³ mol/s; the southward flux is 1.4×10³ mol/s. The net phosphate flux is 21.2×10³ mol/s northward. The flux of silicate is 967×10³ northward and 59×10³ mol/s southward; the net transport is 908×10³ mol/s down-stream. The flux of alkalinity is 75.5×10⁶ mol/s northward, and 10.8×10⁶ mol/s southward, the net flux is 64.7×10⁶ mol/s northward. For total CO₂ the transport is 73.4×10⁶ mol/s northward and 10.8×10⁶ mol/s southward, or a net transport of 62.6×10⁶ mol/s horthward.     

Successful sidetracking of a well onshore Germany by integration of 3D vertical seismic profiling technology – a case study

The exploration for and exploitation of deep Lower Rotliegend gasfields onshore in North Germany often suffers from poor surface seismic imaging. This is owing to the depth of the reservoirs and a thick and complex Zechstein salt overburden. RWE Dea conducted a 3D vertical seismic profile (VSP) survey in a low‐performing production well after the borehole was plugged near total depth. Our main objective was to improve the seismic image of the reservoir zone in the vicinity of the well to determine a new landing point for a planned sidetrack. Because acquisition was in a densely populated and also partially environmentally protected area, there were surface restrictions concerning source deployment. Additionally, due to the complex geological setting, we conducted two 2D VSP field tests and thorough pre‐survey modelling to achieve the best results in terms of seismic imaging, environmental impact and reasonable cost. Deformation bands in the drill core suggest that the initial well was drilled close to a major fault, which was regarded as the main reason for the disappointing production rate. Therefore, we put special emphasis on fault detection in our processing and interpretation. Our interpretation approach used an enhanced structural mapping workflow that helped to design a sidetrack. When the sidetrack was drilled two years later, it ended up being one of the most productive wells in the field.     

Gravity anomaly modeling of sedimentary basins by means of multiple structures and exponential density contrast-depth variations: A space domain approach

An automatic modeling scheme is developed in the space domain to interpret the gravity anomalies of sedimentary basins, among which the density contrast decreases exponentially with depth. Forward modeling is realized in the space domain using a combination of both analytical and numerical approaches. A collage of vertical prisms having equal widths, whose depths are to be estimated, describes the geometry of a sedimentary basin. Initial depths of a sedimentary basin are predicted using the Bouguer slab formula and subsequently updated, iteratively, based on the differences between the observed and theoretical gravity anomalies until the modeled gravity anomalies mimic the observed ones. The validity and applicability of the method is demonstrated with a synthetic and two real field gravity anomalies, one each over the Chintalpudi sub-basin in India and the other over the San Jacinto graben, California. In case of synthetic example, the assumed structure resembles a typical intracratonic rift basin formed by normal block faulting and filled with thick section of sediments. The proposed modeling technique yielded information that is consistent with the assumed parameters in the case of synthetic structure and with the available/drilling depths in case of field examples.     

Geochemistry and mineralogy of laterites in the Sula Mountains greenstone belt, Lake Sonfon gold district, Sierra Leone

Geochemical and mineralogical investigations have been carried out on laterite profiles developed in the Lake Sonfon Au district of northern Sierra Leone. The area is underlain by Archean metavolcanics and constitutes part of the Sula Mountains greenstone belt, which is mineralized in Au. Extensive lateritization has affected the rocks of this region, resulting in a profile which from bottom to top consists typically of a decomposed bedrock zone, a pisolitic laterite layer and a duricrust layer. Both the pisolitic and duricrust layers of the laterite are sometimes punctuated by lenses of ironstones containing high amounts of Cu, Zn, Ni, Co and Ce. Gold occurs as small grains within the heavy mineral fraction recovered from the decomposed rock zones and pisolitic layers of the profiles and also in gravels of streams draining the area. The mineralogy of the duricrust and pisolitic layers is dominated by goethite, gibbsite and quartz, with minor amounts (<5% by volume) of ilmenite, magnetite, haematite, rutile and kaolinite. The kaolinite content increases towards the decomposed rock zone, where talc, vermiculite and other layer lattice silicates become abundant. The heavy-mineral fraction of stream sediments is composed essentially of ilmenite, magnetite, haematite, and traces of rutile, zircon, tourmaline and Au. The Au grains are often characterized by a 10–200-μm-wide rim having a much lower content of Ag (0.3 wt.% or lower) than the grain interior (about 5 wt.% on average). Dissolution effects are also observed on the grain surfaces. It is considered that Au derived from the amphibolite parent rock is dissolved, transported, and redeposited during laterization.The duricrust cover of the laterite profiles is characterized by high contents of Fe₂O₃ (ca. 60 wt.%) and Al₂O₃ (ca. 32wt.%) and low content of SiO₂ (ca. 9 wt.%). In comparison, the pisolitic layer is higher in SiO₂ (ca. 18 wt.%) as well as a slightly higher in Al₂O₃ (ca. 34 wt.%). Lateritic weathering has resulted in the removal of CaO, Na₂O, MgO and SiO₂, with relative enrichment of Fe₂O₃ and Al₂O₃. The geochemical distribution of the trace elements in the laterite profiles can be related to the occurrence of the auriferous mineralization. The significance of these observations is discussed in relation to the origin of the lateritic Au and the role of the associated trace elements as indicators of the mineralization.