Geological controls on rock mass classification of coal from Huntly East Mine, New Zealand

Rock Mass Rating (RMR) measurements from 65 sites within Huntly East underground coal mine are presented. All measurements are in coal, for which the dominant discontinuities are vertical cleat. Basic RMR values using two discontinuity spacings are presented: overall RMR based on the average spacing of all individual discontinuities; and cleat zone RMR based on the average spacing between zones of cleat. Cleat orientations are highly variable, but on average approximately parallel horizontal stress axes (face cleat follows maximum horizontal stress axis, butt cleat follows minimum horizontal stress axis).Contours of RMR variations throughout the mine are used to compare rock mass conditions with geological structure. It is apparent that: (1) RMR is least within downthrown fault blocks, and particularly immediately on the downthrown sides of faults, and greatest in upthrown fault blocks; and (2) RMR contours parallel horizontal stress axes within fault-bounded blocks, and bend to parallel faults at block boundaries. From similar contours for parameters contributing to RMR, the Rock Quality Designation (RQD), groundwater rating, and discontinuity condition rating create most of the observed variations in RMR. RQD is determined from the measured discontinuity frequency and hence is a measure of the degree of fracturing of the rock mass. This is interpreted as influencing the groundwater and condition parameters directly by allowing greater water ingress. Discontinuity frequency is greatest (least spacing) in the immediate vicinity of faults, and in downthrown fault blocks, generating low RMR values. Within fault blocks RQD varies little, so RMR contours align with cleat orientations.As RMR contours, faults, stress field and cleat orientation are clearly interrelated, there is unequivocally a connection between RMR and structural geology; this allows some predictive capacity in terms of ground conditions. If geological features can be accurately defined through either drilling programs or seismic surveys, then ground conditions may be predicted before panels are driven.     

Analysis of earth dams affected by the 2001 Bhuj Earthquake

An earthquake of magnitude of 7.6 (M_w 7.6) occurred in Bhuj, India on January 26, 2001. This event inflicted damages of varying extents to a large number of small to moderate size multi-zone earth dams in the vicinity of the epicenter. Some of the distress was due to the liquefaction of saturated alluvium in foundation. Liquefaction was relatively localized for the majority of these dams because the earthquake struck in the middle of a prolonged dry season when the reservoirs behind these dams were nearly empty and shallow alluvium soils underneath the downstream portions of the dams were partly dry. Otherwise, liquefaction of foundation soils would have been more extensive and damage to these dams more significant. Six such dams have been examined in this paper. Four of these facilities, Chang, Shivlakha, Suvi, and Tapar were within the 50 km of epicenter region. These dams underwent free-field ground motion with peak ground accelerations between 0.28g to 0.52g. Of these Chang Dam underwent severe slumping, whereas Shivlakha, Suvi, and Tapar Dams were affected severely especially over the upstream sections. Fatehgadh Dam and Kaswati Dam were affected relatively less severely. Foundation conditions underneath these dams were first examined for assessing liquefaction potential. A limited amount of subsurface information available from investigations undertaken prior to the earthquake indicates that, although the foundation soils within the top 2.0 to 2.5 m underneath these dams were susceptible to liquefaction, Bhuj Earthquake did not trigger liquefaction because of lack of saturation of these layers underneath the downstream portions of these dams. These dams were then analyzed using a simple sliding block procedure using appropriate estimates of undrained soil strength parameters. The results of this analysis for these structures were found to be in general agreement with the observed deformation patterns.     

Riddle of arsenic in groundwater of Bengal Delta Plain—role of non-inland source and redox traps

In the Bengal Delta Plain (BDP) the primary arsenic sourcing appears to be different from the global scenario. Here, the Terminal Pleistocene–Holocene depositional platform, the interactive early Holocene depositional morphology with fluvio-estuarine and marine incursions played a crucial role for arsenic sourcing and enrichment. The lenticular silt-fine sand layer between anoxic clay beds favoured entrapment of dissolved organic carbon with decayed phyto-planktons debris. The Terminal Pleistocene–Holocene transgression and regression processes may have acted as major events in the BDP. Interestingly, at the end of the last glacial maxima, the Pleistocene delta had undergone block movements, wherein some parts of the platform were raised above the level of Holocene deposition. Those blocks were found to be free from arsenic in the groundwater. The sea, during re-emerging inundation (10–7 ka BP), has witnessed a monsoon-induced environment in the BDP with the resultant oscillation of sea level leading to higher upsurge towards the north. This might have resulted in the marine incursion and inundation in pre-existing land depressions. Meanwhile arsenic entrapments through marine incursion as well as enrichment in the presence of organic carbon/DOC and/or Fe/Mn/Al catalytic agents could have developed into localised redox traps. It may be of relevance that due to the repetitive transgressive–regressive phases in Holocene, resulting in periodic exposure and weathering of iron-bearing minerals and consequent iron enrichment in the aquifer system. The iron, thus present, had free charge to host arsenic as a sink. It appears that arsenic, wherever found, would likely be of atypical localised exhaustible phenomenon, both in horizontal and vertical context. It also rationalises the cause of the absence of arsenic in the other nearby Pleistocene platform, which has not come across Holocene interaction and marine incursion, as to the likely limiting condition for the search for arsenic in the BDP or beyond.     

Fractal Analysis of the Complexity of United States Coastlines

Coastlines have long been used as a principal example of a natural feature that exhibits fractal structure. With the advent of large digitized databases, it has become possible to examine in detail large regions of coast and to examine differences in complexity, as measured by the fractal dimension, among regions. In this study, we have determined the fractal dimension of the Atlantic and Pacific coastlines of the conterminous United States. The traditional divider method was used in obtaining the fractal dimension of each coastline arc from the NOAA Medium-Resolution Shoreline Data Set. On average, the Atlantic coast has much higher fractal dimension than the Pacific coast. The results also indicate that the complexity of the Atlantic coast increases toward low latitudes. These results have implications for the interpretation of species distributions and diversity patterns along the coast and for the understanding of the dynamics of biotic recovery from mass extinctions.     

A copula-based multivariate analysis of Canadian RCM projected changes to flood characteristics for northeastern Canada

In the present work, climate change impacts on three spring (March–June) flood characteristics, i.e. peak, volume and duration, for 21 northeast Canadian basins are evaluated, based on Canadian regional climate model (CRCM) simulations. Conventional univariate frequency analysis for each flood characteristic and copula based bivariate frequency analysis for mutually correlated pairs of flood characteristics (i.e. peak–volume, peak–duration and volume–duration) are carried out. While univariate analysis is focused on return levels of selected return periods (5-, 20- and 50-year), the bivariate analysis is focused on the joint occurrence probabilities P1 and P2 of the three pairs of flood characteristics, where P1 is the probability of any one characteristic in a pair exceeding its threshold and P2 is the probability of both characteristics in a pair exceeding their respective thresholds at the same time. The performance of CRCM is assessed by comparing ERA40 (the European Centre for Medium-Range Weather Forecasts 40-year reanalysis) driven CRCM simulated flood statistics and univariate and bivariate frequency analysis results for the current 1970–1999 period with those observed at selected 16 gauging stations for the same time period. The Generalized Extreme Value distribution is selected as the marginal distribution for flood characteristics and the Clayton copula for developing bivariate distribution functions. The CRCM performs well in simulating mean, standard deviation, and 5-, 20- and 50-year return levels of flood characteristics. The joint occurrence probabilities are also simulated well by the CRCM. A five-member ensemble of the CRCM simulated streamflow for the current (1970–1999) and future (2041–2070) periods, driven by five different members of a Canadian Global Climate Model ensemble, are used in the assessment of projected changes, where future simulations correspond to A2 scenario. The results of projected changes, in general, indicate increases in the marginal values, i.e. return levels of flood characteristics, and the joint occurrence probabilities P1 and P2. It is found that the future marginal values of flood characteristics and P1 and P2 values corresponding to longer return periods will be affected more by anthropogenic climate change than those corresponding to shorter return periods but the former ones are subjected to higher uncertainties.     

Wind energy estimates by use of a diagnostic model

A diagnostic model is a relatively simple and practical tool for modeling the wind flow of the boundary layer in complex terrain. The model begins with a wind analysis based on available surface wind reports and geostrophic winds (computed from pressure data). The height of the boundary layer top (upper surface of the computational domain) is prescribed to fit local conditions. Using the continuity equation in terrain-following coordinates, the winds at mesh points are adjusted to produce nondivergence while maintaining the original vertical component of vorticity. The method of computing the nondivergent winds uses direct alterations. This method may be useful for other modeling purposes and will be described. Data for a long period (usually a year) are analyzed to obtain eigenvectors and the associated time series of their coefficients at each observation time. The model is run only for the five or six eigenvectors that explain most of the variance. The wind field at any particular time is reconstructed from the eigenvector solutions and their appropriate coefficients. Comparisons of model results with measured winds at sites representing different types of terrain will be shown. The accuracy and economy of the model make it a useful tool for estimating wind energy and also for giving wind fields for low-level diffusion models.     

Evolution of a Holocene banner bank controlled by morphodynamics and structural setting of a macrotidal coast: Saint-Brieuc Bay(NW-Europe)

The morphology and internal structure of the Horaine Bank(Bay of Saint-Brieuc, NW France) are described based on multibeam echosounder and high-resolution seismic datasets coupled with vibro-core data. The Horaine Bank shows large-scale bedforms in the lee of a submerged rocky shoal, which allowed defining it as a Banner Bank.The internal structure of the sandbank reveals four seismic units(U1–U4) on a Cambrian basement(U0). The basal unit U1 is interpreted as reworked lowstand fluvial sediments those infilled micro incised valleys during a rise in sea level. This unit is overlain by paleo-coastal barrier sand-spit(U2) whose development was controlled by swell in the context of a rapid rise in sea level. The successive prograding unit(U3) is interpreted as flooding deposits in continuity with unit U2. The unit U4 is characterized by oblique reflectors oriented in two opposite directions. This last unit, dated post 3500 yr BP, corresponds to migrating dunes superimposed on the bank and observable in the high-resolution bathymetric data. The strong correlation between tidal currents and the apparent clockwise migration of dune crests suggests the presence of a tidal gyre controlling the present-day dynamics of most of the Horaine bank dunes. This study proposes a new model for the construction of banner banks characterized by the gradual transition of a sand spit to a banner bank during marine transgression and ensuing hydrodynamic variability.     

Development of a rain‐on‐snow detection algorithm using passive microwave radiometry

Currently observed climate warming in the Arctic has numerous consequences. Of particular relevance, the precipitation regime is modified where mixed and liquid precipitation can occur during the winter season leading to rain‐on‐snow (ROS) events. This phenomenon is responsible for ice crust formation, which has a significant impact on ecosystems (such as biological, hydrological, ecological and physical processes). The spatially and temporally sporadic nature of ROS events makes the phenomenon difficult to monitor using meteorological observations. This paper focuses on the detection of ROS events using passive microwave (PMW) data from a modified brightness temperature (T_B) gradient approach at 19 and 37 GHz. The approach presented here was developed empirically for observed ROS events with coincident ground‐based PMW measurements in Sherbrooke, Quebec, Canada. It was then tested in Nunavik, Quebec, with the Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR‐E). We obtained a detection accuracy of 57, 71 and 89% for ROS detection for three AMSR‐E grid cells with a maximum error of 7% when considering all omissions and commissions with regard to the total number of AMSR‐E passes throughout the winter period. Copyright © 2016 John Wiley & Sons, Ltd.