Dispersion Moments of Fumigating Plumes – Lidar Estimates and Pdf Model Simulations

Near-instantaneous vertical scans ofpower plant plumes, sampled by a lidar over three days as part ofthe 1995 Kwinana Coastal Fumigation Study, are analysed to obtainhourly-averaged total dispersion moments up to fourth order, andalso the relative and meander spreads. Two distinct fumigationcases, termed as neutral and stable cases, are observed dependingon whether the plume transport prior to fumigation takes place ina neutral atmosphere, or in a stable region above the neutralatmosphere. Plumes in the stable case are observed to undergoslower fumigation. The mean spreads display contrasting behavioursfor the two fumigating cases, while the vertical skewness shows anegative peak value of about -1 for the neutral case and -2for the stable case in the fumigation zone. The lateral skewnessis positive with a peak value of about unity for both cases, andis attributed to wind directional shear within the thermalinternal boundary layer. The vertical kurtosis is greater than theGaussian value of 3 in the fumigation zone, while the lateralkurtosis is scattered about this value. A recently-developedskewed probability density function model with wind shear isapplied to describe the fumigation data. Overall, the modelsimulates the observed vertical and lateral statistics well up tothe fourth order, except for the lateral skewness and kurtosisvalues in the stable case, which is probably due to the lidar'srange and sensitivity constraints and an inadequate sample size.Although the lateral turbulent diffusion in the model is Gaussian(i.e., zero skewness), the inclusion of wind shear in the model ismanifested in the predicted lateral skewness being greater thanzero in the fumigation zone, and of similar magnitude to the lidardata in the neutral case.     

Through-Water Close Range Digital Photogrammetry in Flume and Field Environments

Measurement of the structure of gravel-bed river surfaces is crucial for understanding both bed roughness and the sediment entrainment process. This paper describes the use of close range digital photogrammetry to measure and monitor change occurring in submerged river gravel-beds in both flume and field environments. High-resolution digital elevation models (DEMs) were obtained and two-media (through air and water) techniques were used to correct for the e.ects of refraction at the air/water interface. Although suitable refractive models have been developed, the use of proprietary software to generate DEMs automatically introduces the problem of how to re-establish collinearity. A simple refraction correction algorithm based upon analytical geometry was developed and is described. This algorithm was designed for use after initial DEM acquisition and allows any photogrammetric software package to be used for data acquisition. Application of this algorithm led to improvements in DEM accuracy by reducing the systematic, depth-dependent bias caused by refraction
Research carried out in a flume environment allowed the algorithm to be tested by measuring a flooded and drained bed surface. Non-systematic differences between the "dry" and "wet" DEMs arose from reductions in stereomatching success in the two-media case. This effect was thought to be due to light attenuation and the introduction of residual parallax. Results suggest that close range digital photogrammetry can be used to extract high quality DEMs of submerged topography in both flume and field fluvial environments, which represents a particularly exciting development for fluvial geomorphologists     

Large N-S convergence at the northern edge of the Tibetan plateau? New Early Cretaceous paleomagnetic data from Hexi Corridor, NW China

Nine Early Cretaceous paleomagnetic sites have been collected in the Yumen area of the Hexi Corridor (NW China). Magnetic directions isolated at lower temperatures fail the fold test, and lie close to the geocentric axial dipole field direction before tilt correction. High temperature components are carried by magnetite and/or hematite, all with normal polarity, and pass the fold test. The average paleomagnetic pole from the nine sites is at λ=75.5°N, φ=169.9°E (A₉₅=7.7°). These results are consistent with those from other areas of the North China block (NCB), but significantly different from those from the Qaidam Basin on the southern side of the Qilian Mountains. They suggest that: (1) the Yumen region behaved as a rigid part of the NCB since at least the Early Cretaceous; (2) 740±500 km of north-south directed convergence has taken place between the NCB and Qaidam, within the Qilian Mountains and (3) extrusion of Qaidam was accompanied by a 23±5° relative rotation with respect to North China. This is larger than implied by the maximum left lateral slip on the Altyn Tagh fault system. The same data imply some 1000±800 km of Cenozoic motion between the Tarim and NCB blocks, which were so far believed to have formed a rigid entity since at least the Jurassic. One interpretation could be that all Tarim and Qaidam Cretaceous paleomagnetic samples from red beds, but not those from Yumen and the NCB, suffered significant inclination shallowing, as observed in Cenozoic red beds from Central Asia. So far, we do not find support for this possibility. Possible tectonic interpretations include: (1) the existence of a large, as yet uncharted, tectonic discontinuity between Tarim and the NCB in the vicinity of the desert corridor near 95-100°E longitude; (2) the occurrence of significant deformation within southwestern Tarim, to the north of Yingjisha where paleomagnetic sites were obtained, or (3) persistent clockwise rotation of Tarim with respect to the NCB, for at least 20 Ma, at the rate found for current block kinematics.     

Flotation circuits for poorly floating coals

A number of flotation circuits for the recovery of a poorly floating coal were investigated by laboratory batch testing. Analysis of the size and ash distributions of the products and tailings showed that the circuits which would allow an equitable distribution of collector between the coarse and fine size fractions were superior. These circuits were two-stage reagent addition, reflotation of classified tailings and split feed flotation. The reflotation of classified tailings circuit not only gave the best metallurgical performance, it also was the least affected by pulp density variations and imperfect size classification.     

The electrical conductivity of some hydrous and anhydrous molten silicates as a function of temperature and pressure

Electrical conductivity of the following molten silicate systems (in mol%): 60SiO₂-40Na₂O; 65SiO₂-35Na₂O; 75SiO₂-25Na₂O; 78SiO₂-22Na₂O; 72SiO₂-24Na₂O-4CaO; 66SiO₂-19Na₂O-15H₂O; and an anhydrous and hydrous (4 wt% H₂O) Mt. Erebus lava, have been measured as a function of temperature (to 1000°C) and pressure (to 1.3 kbar). The anhydrous soda-rich melts have a positive pressure coefficient of conductivity to ~200 bars and beyond this pressure the pressure coefficient is small and negative. Addition of water lowers the conductivity and gives rise to a negative pressure coefficient at the highest temperatures. The conductivity of hydrous Mt. Erebus lava passed through a maximum with increasing temperature at constant pressure. These phenomena are interpreted in terms of explanations of similar phenomena found in molten salt and aqueous electrolyte solutions.     

A geomagnetic variation study near the Highland Boundary Fault,Scotland

Geological effects on geomagnetic variation components are investigated, using a large-scale simple geological structure. Results show that short-period vertical variations in the range 20 sec–10 min can be sensitive to localised inland conductivity anomalies which only have a small effect on the horizontal field.     

Reconstructing the historical changes in Daphnia mean size and planktivorous fish abundance in lakes from the size of Daphnia ephippia in the sediment

The zooplankton community structure in lakes is highly influenced by size-selective predation by fish, with small zooplankton species dominating at high predation pressure. Remains of cladocerans are preserved in the sediment and may be used to trace historical changes in fish predation. We determined how contemporary data on planktivorous fish were related to the size of Daphnia ephippia (dorsal length) in the surface sediment (0-1 cm) of 52 mainly shallow lakes with contrasting densities of fish and nutrients (TP: 0.002-0.60 mg P l^-1). Density of fish expressed as catch per unit effort, in terms of numbers in multiple mesh-sized gill nets (CPUE_n), decreased significantly with increasing mean size of ephippia. The relationship was improved by adding TP as an independent variable, now explaining 90% of the variation in CPUE_n on the full data set covering lakes in Denmark, Greenland and New Zealand, and 78% if only data on Danish lakes were used. CPUE by weight of planktivorous fish and mean weight of Daphnia in the pelagial during summer were also related to ephippial size. By including contemporary data on established relationships between the sizes of egg-bearing female Daphnia and ephippia, we inferred changes in the CPUE_n, mean size of ephippia-bearing Daphnia and summer mean body weight of Daphnia from ephippial size in four lakes during the past 1-2 centuries. In a hypertrophic lake subject to periodic fish kills, Daphnia mean body weight was high and CPUE_n was low compared with those in two eutrophic lakes, while CPUE_n was low and Daphnia body weight was high in the least eutrophic, clearwater lake. Estimated CPUE_n and Daphnia mean weight in the surface sediment of these four lakes corresponded well with contemporary data. Only small changes in ephippial size with time were observed in the clearwater lake and in one of the lakes that had suffered early eutrophication, while major changes occurred in the two other lakes that had been subjected to a major increase in nutrient input or fish kills. We conclude that Daphnia ephippia preserved in the surface sediments of lakes may be a useful and efficient method to quantify the present-day abundance of planktivorous fish and Daphnia mean size. The method is particularly valid in surveys aimed to give a general picture of the fish stock and the ecological state in a set of lakes in a region rather than a precise estimate for a single lake. Though some evidence is provided, more work is needed to evaluate whether the equations are valid for hind-casting in down-core palaeoecological studies.     

Measuring Flume Surfaces for Hydraulics Research Using a Kodak DCS460

A critical problem in hydraulics research is accurate measurement of fluvially worked sediments, both in the field and in scaled representations of field situations in laboratory flumes. Such measurement must provide information on individual grain characteristics, and their organisation into structures referred to as bedforms. Existing measurement approaches are based upon mechanical or laser profiling devices, which are both expensive and take considerable time to acquire data, particularly where information is required at very high densities. This paper demonstrates how conventional automated terrain model extraction software, combined with image acquisition using a Kodak DCS460 digital camera, has been effective in generating digital elevation models of complex bed morphology. This has reduced time spent collecting data in the flume and has allowed data collection at much higher spatial and temporal densities. Application of the method is illustrated by research carried out at Hydraulics Research Wallingford. Issues discussed include configuration of photographs and control coordinates; appropriate camera calibration methods; stability of inner orientation of the Kodak DCS460; and accuracies obtained. Comparisons with independent check data reveal that accuracies of ±2.5mm have been achieved using a camera-to-object distance of 4.2 m.