The sea as a source of atmospheric phosphorus

The geochemical fractionation of phosphorus on the drop produced by bubbles bursting in seawater has been studied using a field sampling system called the Bubble Interfacial Microlayer Sampler (BIMS). The droplets from bursting bubbles were collected on filter samples in Narragansett Bay, Rhode Island during the summer of 1975. Phosphorus was found to be fractionated by the bubble-bursting process. The enrichment factor ranged from 4 to 170. Enrichment was found to increase with decreasing phosphorus concentration at 20 cm depth while it decreases with increasing wind velocity. Enrichment was independent of bubbling depth. Together these facts suggest that the sea-surface microlayer is the source of the phosphorus on the ejected drops. Organic phosphorus on the filter samples was found to be enriched relative to surface-water phosphorus by factors of 100–200, while reactive phosphorus was enriched by factors of only 6–8. This suggests that surface-active organic phosphorus compounds are the source phosphorus in the microlayer.The organic phosphorus content of samples of atmospheric particulates collected over the phosphate-rich upwelling waters near the Peru coast was found to correlate significantly with sea-salt sodium. Enrichments calculated using the average phosphorus concentration of the surface water in this area agree well with the results of the BIMS study. Thus it appears that phosphorus fractionation does occur in nature and may be important in supplying this nutrient to some coastal regions of the world.     

Assessing the Measurement Consistency Between the Jason-2/AMR and SARAL/AltiKa/DFMR Microwave Radiometers Using Simultaneous Nadir Observations

SARAL/AltiKa has a Dual Frequency Microwave Radiometer (DFMR), and Jason-2 has an Advanced Microwave Radiometer (AMR). Both microwave radiometer sensors include a 23.8 GHz primary water sensing channel. The measurement consistencies between DFMR and AMR are important for establishing a consistent altimetry data set between SARAL/AltiKa and Jason-2 in order to accurately assess sea level rise in a long-term time series. This study investigates the measurement consistency in the 23.8 GHz channel between DFMR and AMR at the Simultaneous Nadir Overpasses (SNO's) between the two satellites and also at coldest ocean brightness temperature locations. Preliminary results show that while both instruments show no significant trends over the one year since the launch of SARAL, a consistent relative bias of 2.88 K (DFMR higher than AMR) with a standard deviation of 0.98 K is observed. The relative bias at the lowest brightness temperature from the SNO method (-3.82 K) is consistent with that calculated from coldest ocean method (-3.74 K). The relative bias exhibits strong latitude (and scene temperature) dependency, changing from -3.82 K at high latitudes to -0.92 K near the equator. There also exists an asymmetry between the northern and southern hemisphere. The relative bias increases toward the lower end of brightness temperature.     

A SIMPLE SOIL MOISTURE INDEX TO FORECAST CROP YIELDS

Neutron probe soil moisture measurements obtained biweekly during the growing season between 1982 and 1991 from multiple depths under grass-covered plots at 17 Illinois Climate Network sites are used to forecast crop yields. A Soil Moisture Index (SMIX) that combines the effect of intensity, duration, and timing of drought or excessively wet conditions was computed by integrating the quantity of available soil moisture throughout the rooting zone over the growing season. Relationships between the SMIX values and crop yields are evaluated at county, regional, and statewide scales. Coefficients of determination (r ²) for relationships between the SMIX values and maize, soybeans, and hay yields at the statewide level are 0.88, 0.74, and 0.81, respectively, when the period of integration is terminated at the end of the growing season. This new soil index can be employed to forecast yields as early as 12 weeks before harvest for the state of Illinois. However, predictions with RMSE ≤ 10% of the mean yield can be achieved only for SMIX integration periods ending 5, 9, and 6 weeks before harvest for maize, soybeans, and hay, respectively. Nomograms are presented for using the relationships between the SMIX values and crop yields to forecast Illinois's major crops well before harvest.     

Biogenic silica from the BDP93 drill site and adjacent areas of the Selenga Delta, Lake Baikal, Siberia

Biogenic silica contents of sediments on the lower Selenga Delta and Buguldeika saddle in Lake Baikal show distinct fluctuations that reflect changes in diatom productivity, and ultimately, climate. The pattern of the upper 50 m of the section, dating from about 334 ka, is similar to that of the marine oxygen-isotope record, increasingly so as the younger sediments become progressively finer grained and less locally derived with time. The last two interglaciations are marked by biogenic silica abundances similar to those of the Holocene. The equivalent of marine oxygen-isotope stage 3 is distinctly intermediate in character between full glacial and full interglacial biogenic silica values. Following near-zero values during the last glacial maximum, biogenic silica began to increase at about 13 ka. The rise in biogenic silica to Holocene values was interrupted by an abrupt decrease during Younger Dryas time, about 11 to 10 14C ka.     

Composition of hydrous melts in equilibrium with quartz eclogites

Summary Compositions of the hydrous melts in equilibrium with garnet, omphacitic clinopyroxene and quartz have been investigated experimentally at 28.5 and 35 kbar. They are represented by silica-rich liquids (> 70% SiO₂) with low MgO, FeO and CaO contents. The removal of ca 10–15% of the magma of this composition may be sufficient to convert quartz eclogite formed after subduction of altered MORB into a quartz-free bimineralic eclogite assemblage, which is a common type of xenoliths in kimberlites.At 28.5 kbar the solidus temperature is between 700 and 750° C in the system quartz eclogite—water, and the high pressure amphibole-out boundary lies at ca 25 kbar in accord with the previous studies.

---

Die Zusammensetzung wasserhältiger Schmelzen im Gleichgewicht mit Quarz-Eklogiten

Zusammenfassung Um Prozesse zu simulieren, die bei der Subduktion von Ozeanbodenbasalten durch partielle Anatexis im Stabilitätsfeld von Eklogiten ablaufen, wurde die Zusammensetzung wasserhältiger Schmelzen in Gleichgewicht mit Granat, Omphacit und Quarz bei 28.5 und 35 Kbar experimentell untersucht. Diese Schmelzen sind reich an SiO₂ (> 70 Gew%) und arm an Mg0, Fe0 and CaO. Die Extraktion von ca. 10–15% derartiger Schmelzen würde genügen, um quarzführende Eklogite, die durch die Subduktion von alteriertem MORB Material entstanden sind, in quarzfreie bimineralische Eklogite umzuwandeln wie sie häufig als Xenolithe in Kimberliten beobachtet werden.Im System Quarz-Eklogit-Wasser liegt die Solidustemperatur bei 28.5 Kbar zwischen 700 und 750°C. Die obere Stabilitätsgrenze von Amphibol liegt in diesem Temperaturbereich bei ca. 25 Kbar.

---

---

With 1 Figures     

Interaction between lateral sorting in river bends and vertical sorting in dunes

Sediment is sorted in river bends under the influence of gravity that pulls the heavier grains downslope and secondary flow that drags the finer grains upslope. Furthermore, when dunes are present, sediment is also sorted vertically at the dune lee side. However, sorting functions are poorly defined, since the relation to transverse bed slope and the interaction between lateral and vertical sorting is not yet understood for lack of data under controlled conditions. The objective of this study is to describe lateral sorting as a function of transverse bed slope and to gain an understanding of the interaction between lateral and vertical sorting in river bends. To this end, experiments were conducted with a poorly sorted sediment mixture in a rotating annular flume in which secondary flow intensity can be controlled separately from the main flow velocity, and therefore transverse bed slope towards the inner bend and dune dimensions can be systematically varied. Sediment samples were taken along cross-sections at the surface of dune troughs and dune crests, and over the entire depth at the location of dune crests (bulk samples), which enabled comparison of the relative contribution of vertical sorting by dunes to lateral sorting by the transverse bed slope. The data show that lateral sorting is always the dominant sorting mechanism in bends, and bulk samples showed minor effects of vertical sorting by dunes as long as all grain-size fractions are mobile. An empirical bend sorting model was fitted that redistributes the available sediment fractions over the cross-section as a function of transverse bed slope. Comparison with field data showed that the model accurately reproduces spatially-averaged trends in sorting at the bend apex in single-thread channels. The bend sorting model therefore provides a better definition of bend sorting with conservation of mass by size fraction and adds to current understanding of bend sorting. The implication for numerical modelling is that bend sorting mechanisms can be modelled independently of dunes, allowing the application of the active layer concept.     

Emerging coral diseases: a temperature‐driven process?

In the last few decades there has been a surge in research focusing on coral disease. While climate change, specifically rising sea surface temperature, has been proposed as a major and growing driver of the emergence of marine diseases, to date a solid connection between disease epizootics and elevated sea surface temperature has not been established. However, a wealth of data now exists, compiled from many different perspectives, that may support such a connection. In this work we provide a comprehensive review targeting one coral disease, black band disease, that spans the infection process, pathobiology, and epizootiology, and links specific mechanisms of the disease process to increasing temperatures. This temperature‐driven pattern of infection can be expanded to include similar processes associated with other temperature‐related coral diseases. The conclusions presented here are based upon the results of many studies using a diverse suite of approaches that have been synthesized to argue that the emergence and continuing spread of black band disease is linked to warming sea surface temperatures. In summary, as global ocean temperatures increase seasonally and over decades, the environment shifts to become more favorable for the growth of potentially pathogenic microorganisms endemic to the immediate environment of the reef. The increase in the relative number of potential pathogens in the microbial community produces microenvironments conducive to the growth of other potential pathogens, leading to infection by a polymicrobial consortium. This consortium is easily perturbed by a (seasonal) temperature decrease, but remains associated with the coral host and can be reactivated with a subsequent seasonal increase in temperature, resulting in a cycle of temperature‐dependent disease emergence.     

Book review

Geotechnical Aspects of Coastal and Offshore Structures. Edited by Yudhair and A. S. Balasubramaniam. Proceedings of the Symposium on Geotechnical Aspects of Coastal and Offshore Structures, Bangkok, December 14–18,1981. Rotterdam: A. A. Balkema, 1983. 280 pp. $40.00.

The Seaside Naturalist: A Guide to Nature Study at the Seashore. Written and illustrated by D. A. Coulombe. Englewood Cliffs, N.J.: Prentice‐Hall, Inc., 1984. 246 pp. $12.95.

Ichnology, Trace Fossils in Sedimentology and Stratigraphy. By A. A. Ekdale, R. G. Bromley, and S. G. Pemberton. Society of Economic Paleontologists and Mineralogists, Short Course No. 15. Tulsa, Okla.: S.E.P.M., 1984. 317 pp. S.E.P.M. members, $16.00; non‐members, $20.00.