Validation of the stochastic distorted-wave Born approximation model with broad bandwidth total target strength measurements of Antarctic krill

In the computations of SDWBA_TTS(f) in Figure 4, the scatteredvector was integrated over all orientations in the XY plane,where X is the main axis of the krill, but a factor of 2 was     

Experimental survey of the hydrodynamic performance of a small spar buoy

The objective in this experimental work is to evaluate the capability of several cylindrical buoys to follow and measure waves. Eleven configurations have been studied, eight among which were furnished with disks of different diameters at the waterline. The experiments took place in the test basin at ISITV. On the one hand, we have obtained a set of transfer coefficients for each frequency and each configuration in regular waves. On the other hand, we have determined the corresponding transfer functions, then we have used the latter to measure irregular waves. The time signals as measured by the buoys with and without corrections have been compared with wave gage measurements and subjected to a wave-by-wave analysis. The results allow the conclusion that the buoy with a medium size disk constitutes the best compromise. In fact, it permits the buoy to follow the free surface while minimizing parasitic motions.     

Ocean bottom refraction seismograph (OBRS)

This paper describes a pop-up ocean bottom seismograph designed primarily for refraction surveys both on the continental shelf and in deep sea. Its development is the extension of our system based on seismic detectors located on the sea floor with radio transmission of seismic signals and used for seismic refraction studies on the continental shelf. The seismic detectors (vertical geophone or hydrophone and two orthogonally mounted horizontal geophones) are located outside of the pressure vessel on the main frame. Optionally, the seismic sensors may be decoupled from the main frame assembly. This decoupling is performed by a mobile arm positioning the separate three component sensor package on the sea floor.Contribution No. 455 of the Département Scientifique, Centre Océanologique de Bretagne.     

Nonparametric Estimates of the Sea State Bias for the Jason-1 Radar Altimeter

The Jason-1 sea state bias (SSB) is analyzed in depth from the first year of GDR products. Compared to previous missions, this work benefits from two aspects of the empirical determination of the SSB from the altimetric data themselves. First, from a methodological point of view, a nonparametric technique (NP) has been developed and largely tested on TOPEX/Poseidon 1, GFO and Envisat data. The NP estimator has proven to be a useful tool in the SSB estimation, and it is now mature enough to be used for a refined analysis. On the other hand, the SSB can be extracted from three different data sets (crossovers, collinear data, and residuals) with different characteristics. It is then possible to cross calibrate various estimations of the SSB models and to determine the most accurate one. A systematic comparison is made between these different estimates for the Jason-1 altimeter. The collinear and crossover data sets yield very similar estimates despite their difference of spatial and temporal distributions. These SSB models assure consistency with the TOPEX mission when comparing Jason-1 and TOPEX residuals during the tandem phase. Thanks to the present work, the impact of the short wavelengths filtering on the SSB estimation is evidenced. More generally, our understanding of potential errors affecting the sea surface height and their impact onto the SSB estimation is also improved.     

Correspondence between the distribution of hydrodynamic time parameters and the distribution of biological and chemical variables in a semi-enclosed coral reef lagoon

Hydrodynamic modeling can be used to spatially characterize water renewal rates in coastal ecosystems. Using a hydrodynamic model implemented over the semi-enclosed Southwest coral lagoon of New Caledonia, a recent study computed the flushing lag as the minimum time required for a particle coming from outside the lagoon (open ocean) to reach a specific station [Jouon, A., Douillet, P., Ouillon, S., Fraunié, P., 2006. Calculations of hydrodynamic time parameters in a semi-opened coastal zone using a 3D hydrodynamic model. Continental Shelf Research 26, 1395–1415]. Local e-flushing time was calculated as the time requested to reach a local grid mesh concentration of 1/e from the precedent step. Here we present an attempt to connect physical forcing to biogeochemical functioning of this coastal ecosystem. An array of stations, located in the lagoonal channel as well as in several bays under anthropogenic influence, was sampled during three cruises. We then tested the statistical relationships between the distribution of flushing indices and those of biological and chemical variables. Among the variables tested, silicate, chlorophyll a and bacterial biomass production present the highest correlations with flushing indices. Correlations are higher with local e-flushing times than with flushing lags or the sum of these two indices. In the bays, these variables often deviate from the relationships determined in the main lagoon channel. In the three bays receiving significant riverine inputs, silicate is well above the regression line, whereas data from the bay receiving almost insignificant freshwater inputs generally fit the lagoon channel regressions. Moreover, in the three bays receiving important urban and industrial effluents, chlorophyll a and bacterial production of biomass generally display values exceeding the lagoon channel regression trends whereas in the bay under moderate anthropogenic influence values follow the regressions obtained in the lagoon channel. The South West lagoon of New Caledonia can hence be viewed as a coastal mesotrophic ecosystem that is flushed by oligotrophic oceanic waters which subsequently replace the lagoonal waters with water considerably impoverished in resources for microbial growth. This flushing was high enough during the periods of study to influence the distribution of phytoplankton biomass, bacterial production of biomass and silicate concentrations in the lagoon channel as well as in some of the bay areas.     

A study of motions in the winter mesosphere using the partial reflection drift technique

Intensive partial reflection drift observations were made at Adelaide (35°S) for a seven day period in June 1973. The results have been analysed to isolate the prevailing motion and oscillations of various time scales: planetary, 24 hr, 12 hr and gravity waves. Each is discussed in turn with particular emphasis on the variability of energy from day to day and as a function of height. Evidence is presented for the local generation of planetary waves, the presence of the evanescent S_?2¹ mode in the 24 hr oscillation, the influence of the S₄² mode in the 12 hr oscillation and a definite polarization of gravity waves. The energies of all the forms of motion are shown to decay exponentially with increasing height and the deposition of energy and momentum in the upper mesosphere and lower thermosphere is discussed.     

Optimization of nonconventional wells under uncertainty using statistical proxies

The determination of the optimal type and placement of a nonconventional well in a heterogeneous reservoir represents a challenging optimization problem. This determination is significantly more complicated if uncertainty in the reservoir geology is included in the optimization. In this study, a genetic algorithm is applied to optimize the deployment of nonconventional wells. Geological uncertainty is accounted for by optimizing over multiple reservoir models (realizations) subject to a prescribed risk attitude. To reduce the excessive computational requirements of the base method, a new statistical proxy (which provides fast estimates of the objective function) based on cluster analysis is introduced into the optimization process. This proxy provides an estimate of the cumulative distribution function (CDF) of the scenario performance, which enables the quantification of proxy uncertainty. Knowledge of the proxy-based performance estimate in conjunction with the proxy CDF enables the systematic selection of the most appropriate scenarios for full simulation. Application of the overall method for the optimization of monobore and dual-lateral well placement demonstrates the performance of the hybrid optimization procedure. Specifically, it is shown that by simulating only 10% or 20% of the scenarios (as determined by application of the proxy), optimization results very close to those achieved by simulating all cases are obtained.