Onboard GRB trigger algorithms of SVOM-GRM

The Gamma-Ray Monitor （GRM） is a high energy detector onboard the future Chinese-French satellite named the Space-based multi-band astronomical Variable Object Monitor which is dedicated to studies of gamma-ray bursts （GRBs）. This paper presents an investigation of the algorithms that look for GRBs by searching for a significant increase in the photon count rate for the computer onboard GRM. The trigger threshold and trigger efficiency, which are based on a given sample of GRBs, are calculated with the algorithms. The trigger characteristics of onboard instruments GRM and ECLAIRs are also analyzed. In addition, the impact of solar flares on GRM is estimated, and a method to distinguish solar flares from GRBs is investigated.     

A simple model accounting for the uptake,transport, and deposition of wind‐eroded mineral particles in the hyperarid coastal Atacama Desert of northern Chile

As previously observed in marine sediments collected downwind of African or South American continental sources, recent studies of sediment cores collected at the bottom of Mejillones Bay in north Chile (23°S) show a laminated structure in which the amount of particles of aeolian origin and their size create significant differences between the layers. This suggests inter‐annual to inter‐decadal variations in the strength of the local southerly winds responsible for (1) the erosion of the adjacent hyperarid surface of the Mejillones Pampa, and (2) the subsequent transport of the eroded particles towards the bay. A simple model accounting for the vertical uptake, transport, and deposition of the particles initially set into motion by wind at the surface of the pampa is proposed. This model, which could be adapted to other locations, assumes that the initial rate of (vertical) uptake is proportional to the (horizontal) saltation flux quantified by means of White's equation, that particles are lifted to a height (H), increasing with the magnitude of turbulence, and that sedimentation progressively removes the coarsest particles from the air column as it moves towards the bay. In this model, the proportionality constant (A) linking the vertical flux of particles with the horizontal flux, and the injection height (H) control the magnitude and size distribution of the deposition flux in the bay. Their values are determined using the wind speed measured over the pampa and the size distribution of particles collected in sediment traps deployed in the bay as constraints. After calibration, the model is used to assess the sensitivity of the deposition flux to the wind intensity variations. The possibility of performing such quantitative studies is necessary for interpreting precisely the variability of the aeolian material in the sediment cores collected at the bottom of Mejillones Bay. Copyright © 2010 John Wiley & Sons, Ltd.     

The New Canadian Urban Modelling System: Evaluation for Two Cases from the Joint Urban 2003 Oklahoma City Experiment

A new Canadian numerical urban modelling system has been developed at the Meteorological Service of Canada to represent surface and boundary-layer processes in the urban environment. In this system, urban covers are taken into account by including the Town Energy Balance urban-canopy parameterization scheme in the Global Environmental Multiscale meteorological model. The new modelling system is run at 250-m grid size for two intensive observational periods of the Joint Urban 2003 experiment that was held in Oklahoma City, U.S.A. An extensive evaluation against near-surface and upper-air observations has been performed. The Town Energy Balance scheme correctly simulates the urban micro-climate, more particularly the positive nighttime urban heat island, and also reproduces the “cool” island during the morning but does not succeed in maintaining it during all of the daytime period. The vertical structure of the boundary layer above the city is reasonably well simulated, but the simulation of the nocturnal boundary layer is difficult, due to the complex interaction with the nighttime southerly low-level jet that crosses the domain. Sensitivity tests reveal that the daytime convective boundary layer is mainly driven by dry soil conditions in and around Oklahoma City and that the nighttime low-level jet reinforces the urban heat island in the first 300m through large-scale advection, leading to the development of a less stable layer above the city.     

A fractured roman glass block altered for 1800 years in seawater: Analogy with nuclear waste glass in a deep geological repository

Fractured archaeological glass blocks altered 1800 years in seawater are investigated because of their morphological analogy with vitrified nuclear waste. They provide an opportunity for understanding glass alteration in variable confined media (cracks), by studying an actual ancient system in a known stable natural environment. Characterization of the crack network from two-dimensional trace maps (length, alteration thickness, orientation) allows us to determine the three-dimensional geometric parameters (crack density, fracture ratio) and the percentage of alteration, using stereological relations. This methodology could be applied to nuclear glass. From a representative archaeological glass block, we showed that the surface developed by the cracks is 86 ± 27 times greater than the geometric surface but the volumetric alteration is 12.2 ± 4.1%, which is only 12 times greater than the volumetric alteration of the block periphery (about 1 vol%). This unexpected low value is explained by the large variation of the alteration thicknesses in the different types of cracks in relation with their location in the block. The alteration thickness is usually smaller in the internal zone than in the border zone. The alteration layers resulted from three main mechanisms (interdiffusion, glass dissolution, and secondary phase precipitation) leading to two different alteration products (a sodium-depleted layer and mainly a Mg-smectite). Geometric parameters such as the glass surface area/solution volume ratio and transport parameters (renewal of the alteration solution) strongly affected the glass dissolution kinetics. The confined conditions and the diffusive transport of reactive species favor low alteration kinetics. The precipitation of secondary phases also results in sealing of the cracks. Consequently, although it is not known if subcritical crack growth occurred, internal cracks account for only a minor contribution to the overall alteration. These results improve our understanding of alteration in cracks for assessing the predominant physical and chemical parameters that must be considered in long-term nuclear glass modeling.     

Late-time photometry of two nearby type II-P supernovae： 2004dj and 2004et

We present late-time photometry for two bright type II-P supernovae （SNe） 2004dj and 2004et, extending over 400 d after the explosion, which are measured with a set of intermediate-band filters that have the advantage of tracing the strength variations of some spectral features. Although these two SNe II-P exhibit similar photometric evolution at earlier times, they diverge during the nebular phase. SN 2004dj shows a slow late-time decline rate with - 0.7 ±0.1 mag （100d）^-1 during the period ranging from t ≈ 200 - 300 d after the explosion, while SN 2004et shows a much faster decline rate at a comparable phase, e.g., 1.3 ± 0.1 mag （100d）^-1. The steeper decay rate seen in SN 2004et is likely due to dust formation in the explosion ejecta. Based on intermediate-band photometry, we derived the evolution of the feature lines [e.g., Hα] of SNe 2004dj and 2004et which are similar in flux at comparable phases but perhaps with significantly different decay rates. The origin of the observed variations in the continuum and the feature lines is briefly discussed.     

The effective elastic lithosphere under the Cook-Austral and Society islands

We have determined the elastic thicknessT_e of the oceanic lithosphere along two volcanic chains of the South Central Pacific: Cook-Austral and Society islands. We used a three-dimensional spatial method to model the lithospheric flexure assuming a continuous elastic plate. The model was constrained by geoid height data from the SEASAT satellite.Along the Cook-Austral chain the elastic thickness increases westward, from 2–4 km at McDonald hot spot to 14 km at Rarotonga. At McDonald seamount, however, the data are better explained by a local compensation model. The observed trend shows an increase ofT_e with age of plate at loading time. However, the elastic layer under the Cook-Austral appears systematically thinner by several kilometers than expected for “normal” seafloor, suggesting that substantial thermal thinning has taken place in this region. Considering the apparent thermal age of the plate instead of crustal age improves noticeably the results. Along the Society chainT_e varies from 20 km under Tahiti to 13 km under Maupiti which is located 500 km westward. When plotting together the Society and Cook-AustralT_e results versus age of load, we notice that within the first five million years after loading,T_e decreases significantly while tending rapidly to an equilibrium value. This may be interpreted as the effect of initial stress relaxation which occurs just after loading inside the lower lithosphere and suggests that the presently measured elastic thickness under the very young Tahiti load ( 0.8 Ma) is not yet the equilibrium thickness.     

Hyperspectral core logging for fire reconstruction studies

Lacustrine sediments contain a wide range of proxies that enable paleoenvironmental reconstructions. For instance, charcoal can be used to document past fire regime changes. In order to analyse high-temporal- and spatial-resolution records, however, it is necessary to develop fast, low-cost and high-stratigraphic-resolution methods. We developed a new paleo-fire proxy by studying a lacustrine core from the Esterel Massif, SE France, an area affected by two recent fire events, in AD 1987 and 2003. For this purpose, we searched for charcoal deposited and preserved in the lake sediments by combining a number of complementary methods, including: classic macrocharcoal tallying, scanning spectrophotometry, scanning hyperspectral imaging and high pressure liquid chromatography analyses. Macrocharcoal quantification is efficient, but time-consuming, and only provides intermediate-resolution data (cm scale). Spectrophotometry, used classically to quantify colour, is very fast, provides high-resolution data (4 mm) and is non-destructive (core preservation). Hyperspectral data have the same advantages as spectrophotometry, but offer higher spatial resolution (64-µm pixel size) and higher spectral resolution (6 nm) for core logging applications. The main result of this research is based on hyperspectral analysis at very high stratigraphic resolution using the I-band index. This index usually measures reflectance values at [660, 670 nm] corresponding to the trough in red reflectance produced by Chlorophyll a and its diagenetic products. This [660, 670 nm] reflectance trough, however, is also affected by the presence of altered organic matter and decreases with altered organic matter such as charcoal particles. Charcoal effect on the reflectance of Chlorophyll a and its diagenetic products is identified on first derivative spectra by a characteristic pattern around 675 nm, which is also in agreement with the Chlorophyll a concentrations measured by high-pressure liquid chromatography and charcoal particles. The I-band index is hence suitable for detecting burned organic matter, by quantifying the dilution of the chlorophyll signal by the charcoal signal. Thus, this adaptation of the I-band index can be applied in fire reconstruction studies.