Tube wave to shear wave conversion at borehole plugs

In hydraulic fracturing experiments, perforation shots excite body and tube waves that sample, and thus can be used to characterize, the surrounding medium. While these waves are routinely employed in borehole operations, their resolving power is limited by the experiment geometry, the signal‐to‐noise ratio, and their frequency content. It is therefore useful to look for additional, complementary signals that could increase this resolving power. Tube‐to‐body‐wave conversions (scattering of tube to compressional or shear waves at borehole discontinuities) are one such signal. These waves are not frequently considered in hydraulic fracture settings, yet they possess geometrical and spectral attributes that greatly complement the resolution afforded by body and tube waves alone. Here, we analyze data from the Jonah gas field (Wyoming, USA) to demonstrate that tube‐to‐shear‐wave conversions can be clearly observed in the context of hydraulic fracturing experiments. These waves are identified primarily on the vertical and radial components of geophones installed in monitoring wells surrounding a treatment well. They exhibit a significantly lower frequency content (10–100 Hz) than the primary compressional waves (100–1000 Hz). Tapping into such lower frequencies could help to better constrain velocity in the formation, thus allowing better estimates of fracture density, porosity and permeability. Moreover, the signals of tube‐to‐shear‐wave conversion observed in this particular study provide independent estimates of the shear wave velocity in the formation and of the tube wave velocity in the treatment well.     

Pearl oysters Pinctada margaritifera grazing on natural plankton in Ahe atoll lagoon (Tuamotu archipelago, French Polynesia)

In atoll lagoons of French Polynesia, growth and reproduction of pearl oysters are mainly driven by plankton concentration. However, the actual diet of black-lip pearl oysters Pinctada margaritifera in these lagoons is poorly known. To fill this gap, we used the flow through chamber method to measure clearance rates of P. margaritifera in Ahe atoll lagoon (Tuamotu Archipelago, French Polynesia). We found: (i) that pearl oysters cleared plankton at a rate that was positively related to plankton biovolume, (ii) that nanoflagellates were the main source of carbon for the pearl oysters, and (iii) that the quantity and origin of carbon filtrated by pearl oysters was highly dependent on the concentration and composition of plankton. These results provide essential elements for the comprehension of growth and reproduction variability of pearl oysters in atoll lagoons of French Polynesia.     

Alternate bars in a sandy gravel bed river: generation,migration and interactions with superimposed dunes

A field study was carried out to investigate the development of alternate bars in a secondary channel of the Loire River (France) as a function of discharge variations. We combined frequent bathymetric surveys, scour chains and stratigraphical analysis of deposits with measurements and modelling of flow dynamics. The channel exhibited migrating bars, non‐migrating bars and superimposed dunes. Possible mechanisms of bar initiation were found to be chutes associated with changes of bank direction and instability resulting from interactions between existing bars during the fall in water level after floods. We propose that the reworking of bar sediments during low flows (high width‐to‐depth ratio β), reinforced by high values of the Shields mobility parameter, can explain the formation or re‐generation of new alternate migrating bars during a subsequent flood. The migration pattern of the bars was found to be cyclic and to depend mainly on (i) channel layout and (ii) the dynamics of superimposed dunes with heights and lengths depending on location and discharge value. For instance, the hysteresis affecting the steepness of dunes influences the flow resistance of the dunes as well as the celerity of migrating bars during flood events. We compare the findings from the field with results from theoretical studies on alternate bars. This gives insight in the phenomena occurring in the complex setting of real rivers, but it also sheds light on the extent to which bar theories based on idealized cases can predict those phenomena. Copyright © 2014 John Wiley & Sons, Ltd.     

Field application of close‐range digital photogrammetry (CRDP) for grain‐scale fluvial morphology studies

In situ measurement of grain‐scale fluvial morphology is important for studies on grain roughness, sediment transport and the interactions between animals and the geomorphology, topics relevant to many river practitioners. Close‐range digital photogrammetry (CRDP) and terrestrial laser scanning (TLS) are the two most common techniques to obtain high‐resolution digital elevation models (DEMs) from fluvial surfaces. However, field application of topography remote sensing at the grain scale is presently hindered mainly by the tedious workflow challenges that one needs to overcome to obtain high‐accuracy elevation data. A recommended approach for CRDP to collect high‐resolution and high‐accuracy DEMs has been developed for gravel‐bed flume studies. The present paper investigates the deployment of the laboratory technique on three exposed gravel bars in a natural river environment. In contrast to other approaches, having the calibration carried out in the laboratory removes the need for independently surveyed ground‐control targets, and makes for an efficient and effective data collection in the field. Optimization of the gravel‐bed imagery helps DEM collection, without being impacted by variable lighting conditions. The benefit of a light‐weight three‐dimensional printed gravel‐bed model for DEM quality assessment is shown, and confirms the reliability of grain roughness data measured with CRDP. Imagery and DEM analysis evidences sedimentological contrasts between gravel bars within the reach. The analysis of the surface elevations shows the effect variable grain‐size and sediment sorting have on the surface roughness. By plotting the two‐dimensional structure functions and surface slopes and aspects we identify different grain arrangements and surface structures. The calculation of the inclination index allows determining the surface‐forming flow direction(s). We show that progress in topography remote sensing is important to extend our knowledge on fluvial morphology processes at the grain scale, and how a technique customized for use by fluvial geomorphologists in the field benefits this progress. Copyright © 2016 John Wiley & Sons, Ltd.     

Influence of food supply on the δ13C signature of mollusc shells: implications for palaeoenvironmental reconstitutions

Compared to oxygen isotopes, the carbon isotope composition of biogenic carbonates is less commonly used as proxy for palaeoenvironmental reconstructions because shell δ¹³C is derived from both dissolved inorganic (seawater) and organic carbon sources (food), and interactions between these two pools make it difficult to unambiguously identify any independent effect of either. The main purpose of this study was to demonstrate any direct impact of variable food supply on bivalve shell δ¹³C signatures, using low/high rations of a ¹³C-light mixed algal diet fed to 14-month-old (adult) cultured Japanese Crassostrea gigas under otherwise essentially identical in vitro conditions during 3 summer months (May, June and July 2003, seawater temperature means at 16, 18 and 20 °C respectively) in experimental tanks at the Argenton laboratory along the Brittany Atlantic coast of France. At a daily ration of 12% (versus 4%) oyster dry weight, the newly grown part of the shells (hinge region) showed significantly lower δ¹³C values, by 3.5‰ (high ration: mean of −5.8  ± 1.1‰, n = 10; low ration: mean of −2.3  ± 0.7‰, n = 6; ANOVA Scheffe’s test, p < 0.0001). This can be explained by an enhanced metabolic activity at higher food supply, raising ¹³C-depleted respiratory CO₂ in the extrapallial cavity. Based on these δ¹³C values and data extracted from the literature, and assuming no carbon isotope fractionation between food and shell, the proportion of shell metabolic carbon would be 26  ± 7 and 5  ± 5% for the high- and low-ration C. gigas shells respectively; with carbon isotope fractionation (arguably more realistic), the corresponding values would be 69  ± 14 and 24  ± 9%. Both groups of cultured shells exhibited lower δ¹³C values than did wild oysters from Marennes-Ol éron Bay in the study region, which is not inconsistent with an independent influence of diet type. Although there was no significant difference between the two food regimes in terms of δ¹⁸O shell values (means of 0.1  ± 0.3 and 0.4  ± 0.2‰ at high and low rations respectively, non-significant Scheffe’s test), a positive δ¹³C vs. δ¹⁸O relationship recorded at high rations supports the interpretation of a progressive temperature-mediated rise in metabolic activity fuelled by higher food supply (in this case reflecting increased energy investment in reproduction), in terms not only of δ¹³C (metabolic signal) but also of δ¹⁸O (seawater temperature signal). Overall, whole-shell δ¹⁸O trends faithfully recorded summer/winter variations in seawater temperature experienced by the 17-month-old cultured oysters.     

Mixing efficiency from microstructure measurements in the Sicily Channel

Ocean Dynamics - The dissipation flux coefficient, a measure of the mixing efficiency of a turbulent flow, was computed from microstructure measurements collected with a vertical microstructure...     

Aerosol optical properties and its radiative forcing over Yulin,China in 2001 and 2002

The aerosol optical properties and direct radiative forcing over the Mu Us desert of northern China, acquired through a CE318 sunphotometer of the ground-based Aerosol Robotic Network (AERONET), are analyzed. The seasonal variations in the aerosol optical properties are examined. The effect of meteorological elements (pressure, temperature, water vapor pressure, relative humidity and wind speed) on the aerosol optical properties is also studied. Then, the sources and optical properties under two different cases, a dust event and a pollution event, are compared. The results show that the high aerosol optical depth (AOD) found in Yulin was mostly attributed to the occurrence of dust events in spring from the Mu Us desert and deserts of West China and Mongolia, as well as the impacts of anthropogenic pollutant particles from the middle part of China in the other seasons. The seasonal variation and the probability distribution of the radiative forcing and the radiative forcing efficiency at the surface and the top of the atmosphere are analyzed and regressed using the linear and Gaussian regression methods.