Seismic performance assessment and base-isolated floor protection of statues exhibited in museum halls

A study concerning the evaluation of seismic response of statues exhibited in art museums, and a base-isolated floor strategy for their enhanced protection, are presented in this paper. Attention is particularly focused on statues made of small tensile strength materials, whose behaviour is simulated by a smeared-crack finite element approach. Seismic performance is assessed by referring to four levels specially postulated herein, and namely: (1) Rest conditions; (2) No rocking; (3) Damage control; and (4) Collapse prevention. The response is investigated via incremental dynamic analysis, by progressively increasing the amplitude of the ground motion histories adopted as inputs, and by relating output data to the limit conditions fixed for the above-mentioned performance levels. The assessment procedure is applied to a demonstrative case study, represented by a marble statue to be exhibited in the museum wing situated at the ground level of a medieval castle in Italy, according to an architectural hypothesis of partial rebuilding and reuse of the stronghold. The design solution for the base-isolated floor consists in a system of double-friction pendulum isolators. The finite element model constitutive laws and parameters, the dynamic analyses carried out in fixed-base and base-isolated floor conditions, and the practical implementation of the assumed performance assessment criteria are reported for the statue examined, along with a selection of technical details of the floor design.     

Kinematic evolution of thrust-related structures in the Umbro-Romagnan parautochthon (northern Apennines, Italy)

In the internal part of the Umbro-Marchean-Romagnan Apennines, the foredeep clastic wedge constituting the Neogene part of the sedimentary cover is completely detached from the underlying Mesozoic–Palaeogene succession. The resulting (Umbro-Romagnan) parautochthon consists of tectonostratigraphic units with a general geometry of broad synclinal blocks separated by narrow faulted anticlines.
Thrust-related structures observed in the field require thrust ramp propagation to have occurred within already folded rocks; therefore, they cannot be restored using simple fault-bend fold or fault-propagation folding models. Evidence for a passive fold origin in the studied rocks suggests that an early detachment folding episode preceded ramp propagation. The latter was facilitated by the enhanced thickness of incompetent material in the cores of detachment anticlines, which became the preferential sites where thrust ramps cut up-section. Depending on the trajectory of such thrust ramps, different types of fault-related structures could develop. Hanging-wall anticlines which give way to monoclinal structures higher up in the section are associated with listric thrust ramps, whereas hanging wall monoclines approximately parallel to the underlying fault surface are associated with straight-trajectory ramps.
This kinematic evolution, which occurred partly during syn-depositional compression, also accounts for the observed lithofacies distribution. The latter reflects an early differentiation of the foredeep trough into sub-basins that are progressively younger towards the foreland. The detachment anticlines that originally bounded such sub-basins were the site of later thrust propagation, leading to a tectonic juxtaposition of different tectonostratigraphic units consisting of broad NW-SE elongate synclinal blocks.     

Structural trends and palaeogeography of the central and western Sicily belt: new insights

The geology of the Sicilian mainland is summarized by N–S geological sections. A continuous late Cenozoic orogenic belt through central and western Sicily resulted from a complex deformative history, recorded by several tectonic events. The deformation mainly involved the sedimentary cover of the old African continental margin, formed in a large basinal area, bordered at its southern margin by a shallow-water carbonate environment attached to Gondwana. The orogenic belt involves a complex architecture of thrust systems, of different size, geometry and palaeogeographical origin. Deformation, which mainly developed in the earlier stages of thrusting in the basinal rock assemblages, mainly gave rise to a stack of three different duplex structures, respectively, composed of Palaeozoic, Mesozoic–Palaeogene and Neogene strata. Large-scale clockwise rotation of the thrusts predated transpressional movements in the hinterland during the latest Miocene to Pliocene. High- angle reverse faults, with lateral components, modified earlier tectonic contacts within the allochthons. Contemporaneous southwards- directed imbrications affected the external southern areas, progressively incorporating foreland and piggyback basirts. The stratigraphic relationships of basin-fills to the tectonic structures reveals that reactivation processes have been active during the last Plio-Pleistocene.     

Experimental study of gold-hydrosulphide complexing in aqueous solutions at 350-500°C, 500 and 1000 bars using mineral buffers

The solubility of gold was measured in KCl solutions (0.001-0.1 m) at near-neutral to weakly acidic pH in the presence of the K-feldspar-muscovite-quartz, andalusite-muscovite-quartz, and pyrite-pyrrhotite-magnetite buffers at temperatures 350 to 500°C and pressures 0.5 and 1 kbar. These mineral buffers were used to simultaneously constrain pH, f(S₂), and f(H₂). The experiments were performed using a CORETEST flexible Ti-cell rocking hydrothermal reactor enabling solution sampling at experimental conditions. Measured log m(Au) (mol/kg H₂O) ranges from −7.5 at weakly acid pH to −5.9 in near-neutral solutions, and increases slightly with temperature. Gold solubility in weakly basic and near-neutral solutions decreases with decreasing pH at all temperatures, which implies that Au(HS)₂ is the dominant Au species in solution. In more acidic solutions, solubility is independent of pH. Comparison of the experimentally measured solubilities with literature values for Au hydrolysis constants demonstrates that at 350°C dominates Au aqueous speciation at the weakly acidic pH and f(S₂)/f(H₂) conditions imposed by the pyrite-pyrrhotite-magnetite buffer. In contrast, at temperatures >400°C becomes less important and predominates in weakly acid solutions. Solubility data collected in this study were used to calculate the following equilibrium reaction constants:

     

Assessing the Vibrational Frequencies of the Holweide Hospital in the City of Cologne (Germany) by Means of Ambient Seismic Noise Analysis and FE modelling

Ambient seismic noise measurements were conducted inside the Holweide Hospital (Cologne) for checking whether its frequencies of vibration fall into the range where soil amplification is expected. If this is the case, damage might increase in case of an earthquake due to an amplified structural response of the building. Two different techniques were used: the ratio between the horizontal and vertical components of the spectra recorded at stations located inside the building and the ratio between the corresponding components of the spectra recorded simultaneously inside the building and at a reference station placed outside. While the former method might be preferred because of less equipment involved, the latter has the advantage of producing more stable results and deleting automatically the influence of the sedimentary cover, which might obscure some eigenfrequencies of vibration of the building. An independently performed finite-element analysis of the hospital showed a good correlation between measured and calculated eigenmodes.     

Diffuse CO<Subscript>2</Subscript> degassing at Vesuvio,Italy

At Vesuvio, a significant fraction of the rising hydrothermal–volcanic fluids is subjected to a condensation and separation process producing a CO₂–rich gas phase, mainly expulsed through soil diffuse degassing from well defined areas called diffuse degassing structures (DDS), and a liquid phase that flows towards the outer part of the volcanic cone. A large amount of thermal energy is associated with the steam condensation process and subsequent cooling of the liquid phase. The total amount of volcanic–hydrothermal CO₂ discharged through diffuse degassing has been computed through a sequential Gaussian simulation (sGs) approach based on several hundred accumulation chamber measurements and, at the time of the survey, amounted to 151 t d^–1. The steam associated with the CO₂ output, computed assuming that the original H₂O/CO₂ ratio of hydrothermal fluids is preserved in fumarolic effluents, is 553 t d^–1, and the energy produced by the steam condensation and cooling of the liquid phase is 1.47×10¹² J d^–1 (17 MW). The location of the CO₂ and temperature anomalies show that most of the gas is discharged from the inner part of the crater and suggests that crater morphology and local stratigraphy exert strong control on CO₂ degassing and subsurface steam condensation. The amounts of gas and energy released by Vesuvio are comparable to those released by other volcanic degassing areas of the world and their estimates, through periodic surveys of soil CO₂ flux, can constitute a useful tool to monitor volcanic activity.Editorial responsibility: H. Shinohara     

Criteria of geographic relevance: an experimental study

The relevance of geographic information has become an emerging problem in geographic information science due to an enormous increase in volumes of data at high spatial, temporal, and semantic resolution, because of ever faster rates of new data capturing. At the same time, it is not clear whether the concept of relevance developed in information science and implemented for document-based information retrieval can be directly applied to this new, highly dynamic setting. In this study, we analyze the criteria users apply when judging the relevance of geographic entities in a given mobile usage context. Two different experiments have been set up in order to gather users' opinions on a set of possible criteria, and their relevance judgements in a given scenario. The importance ascribed to the criteria in both experiments clearly implies that a new concept of relevance is required when dealing with geographic entities instead of digital documents. This new concept of ‘Geographic Relevance’ is highly dependent on personal mobility and user's activity, whose understanding may in turn be refined by the assimilation of ‘Geographic Relevance’ itself.     

Runoff-generated debris flows: Observation of initiation conditions and erosion–deposition dynamics along the channel at Cancia (eastern Italian Alps)

In the Dolomitic region, abundant coarse hillslope sediment is commonly found at the toe of rocky cliffs. Ephemeral channels originate where lower permeability bedrock surfaces concentrate surface runoff. Debris flows initiate along such channels following intense rainfall and determine the progressive erosion and deepening of the channels. Sediment recharge mechanisms include rock fall, dry ravel processes and channel-bank failures. Here we document debris flow activity that took place in an active debris flow basin during the year 2015. The Cancia basin is located on the southwestern slope of Mount Antelao (3264 m a.s.l.) in the dolomitic region of the eastern Italian Alps. The 2.5 km² basin is incised in dolomitic limestone rocks. The data consist of repeated topographic surveys, distributed rainfall measurements, time-lapse (2 s) videos of two events and pore pressure measurements in the channel bed. During July and August 2015, two debris flow events occurred, following similarly intense rainstorms. We compared rainfall data to existing rainfall triggering thresholds and simulated the hydrological response of the headwater catchment with a distributed model in order to estimate the total and peak water discharge. Our data clearly illustrate how debris entrainment along the channel is the main contributor to the overall mobilized volume and that erosion is dominant when the channel slope exceeds 16°. Further downstream, sediment accumulation and depletion occurred alternately for the two successive events, indicating that sediment availability along the channel also influences the flow behaviour along the prevailing-transport reach. The comparison between monitoring data, topographical analysis and hydrological simulation allows the estimation of the average solid concentration of the two events and suggests that debris availability has a significant influence on the debris flow volume. © 2020 John Wiley & Sons, Ltd.     

Evaluation of the SEDD model for predicting sediment yield at the Sicilian experimental SPA2 basin

In this paper a spatially distributed model of the hillslope sediment delivery processes, named the sediment delivery distributed (SEDD) model, is initially reviewed; the model takes into account the sediment delivery processes due to both the hillslope sediment transport and the effects of slope curvature. Then the rainfall and sediment yield events measured at the experimental SPA2 basin, in Sicily, are used both to calibrate the SEDD model and to verify the predictive capability of the distributed sediment delivery approach at event scale. For the SPA2 basin discretized into morphological units and stream tubes, the SEDD model is calibrated at event scale using the measurements carried out at the outlet of the experimental basin in the period December 2000–January 2001. The model calibration is used to determine a relationship useful for estimating the unique coefficient β_e of the model by rainfall erosivity factor R_e at event scale. To test the predictive capability of the β_e = f(R_e) relationship, 20 events measured in the period September 2002–December 2005 are used; the comparison between measured sediment yield values and calculated ones for all monitored events shows that the sediment delivery distributed approach has a good predictive ability at event scale. The analysis also shows that estimating β_e by the relationship β_e = f(R_e) gives a better agreement between measured and calculated sediment yields than obtained with the median value β_e,m of all 27 calculated β_e values. Finally the analysis at annual scale, for the period 2000–2005, allows the estimation of the median value β_a,m representative of the annual behaviour. This analysis shows that the sediment delivery distributed approach also has a good predictive ability at annual scale. Copyright © 2006 John Wiley & Sons, Ltd.