Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.     

Phytoreduction and volatilization of mercury by ascorbate in Arabidopsis thaliana, European beech and Norway spruce

Mercury vapor (Hg⁰) emission from plants contributes to the atmospheric Hg cycle. Young barley (Hordeum vulgare L.) plants grown on a hydroponic cultivation medium containing Hg(II) have previously been shown to increase their Hg⁰ emission significantly by reduction of Hg(II) with endogenous ascorbic acid. Regarding the potential contribution to the Hg cycle from the vast forest-covered areas, it was important to investigate this mechanism in trees. The increase in Hg⁰ emission from young European beech plants cultivated on a HgCl₂ medium exceeded that from controls by ca. tenfold and was proportional to the Hg(II) concentration. From these experiments, a flux of 12.8 μg Hg⁰/h/m² was estimated at an exposure of the roots to 20 μM Hg(II). Mercury vapor release from homogenates of Norway spruce needles exceeded that from European beech leaves by a factor of 2.3–4, i.e. in proportion to the reported AA concentrations; the reduction was maximal at alkaline pH which is typical for AA. The 8.4-fold difference in Hg⁰ release between homogenates from wild-type Arabidopsis thaliana and from its AA-deficient mutant vtc 1-1 also paralleled the reported difference in AA levels of both species. It is concluded that the phytoreduction and vaporization of Hg by AA is an important mechanism as much for Hg detoxification in trees as for Hg emission to the atmosphere. The efficiency of this process seems to result from the optimal coordination of transfer and biochemical transformation of mercuric ions and Hg vapor. There is no evidence for a relevant difference in the mechanisms of biogenic Hg(II) reduction between grass plants and trees.     

Stable Cu and Zn isotope ratios as tracers of sources and transport of Cu and Zn in contaminated soil

Copper and Zn metals are produced in large quantities for different applications. During Cu production, large amounts of Cu and Zn can be released to the environment. Therefore, the surroundings of Cu smelters are frequently metal-polluted. We determined Cu and Zn concentrations and Cu and Zn stable isotope ratios (δ⁶⁵Cu, δ⁶⁶Zn) in three soils at distances of 1.1, 3.8, and 5.3 km from a Slovak Cu smelter and in smelter wastes (slag, sludge, ash) to trace sources and transport of Cu and Zn in soils. Stable isotope ratios were measured by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) in total digests. Soils were heavily contaminated with concentrations up to 8087 μg g⁻¹ Cu and 2084 μg g⁻¹ Zn in the organic horizons. The δ⁶⁵Cu values varied little (−0.12‰ to 0.36‰) in soils and most wastes and therefore no source identification was possible. In soils, Cu became isotopically lighter with increasing depth down to 0.4 m, likely because of equilibrium reactions between dissolved and adsorbed Cu species during transport of smelter-derived Cu through the soil. The δ⁶⁶Zn_IRMM values were isotopically lighter in ash (−0.41‰) and organic horizons (−0.85‰ to −0.47‰) than in bedrock (−0.28‰) and slag (0.18‰) likely mainly because of kinetic fractionation during evaporation and thus allowed for separation of smelter-Zn from native Zn in soil. In particular in the organic horizons large variations in δ⁶⁶Zn values occur, probably caused by biogeochemical fractionation in the soil-plant system. In the mineral horizons, Zn isotopes showed only minor shifts to heavier δ⁶⁶Zn values with depth mainly because of the mixing of smelter-derived Zn and native Zn in the soils. In contrast to Cu, Zn isotope fractionation between dissolved and adsorbed species was probably only a minor driver in producing the observed variations in δ⁶⁶Zn values. Our results demonstrate that metal stable isotope ratios may serve as tracer of sources, vertical dislocation, and biogeochemical behavior in contaminated soil.     

BIFoR FACE: Water–soil–vegetation–atmosphere data from a temperate deciduous forest catchment,including under elevated CO2

The ecosystem services provided by forests modulate runoff generation processes, nutrient cycling and water and energy exchange between soils, vegetation and atmosphere. Increasing atmospheric CO₂ affects many linked aspects of forest and catchment function in ways we do not adequately understand. Global levels of atmospheric CO₂ will be around 40% higher in 2050 than current levels, yet estimates of how water and solute fluxes in forested catchments will respond to increased CO₂ are highly uncertain. The Free Air CO₂ Enrichment (FACE) facility of the University of Birmingham's Institute of Forest Research (BIFoR) is the only FACE in mature deciduous forest. The site specializes in fundamental studies of the response of whole ecosystem patches of mature, deciduous, temperate woodland to elevated CO₂ (eCO₂). Here, we describe a dataset of hydrological parameters – seven weather parameters at each of three heights and four locations, shallow soil moisture and temperature, stream hydrology and CO₂ enrichment – retrieved at high frequency from the BIFoR FACE catchment.     

When do rock glacier fronts fail? Insights from two case studies in South Tyrol (Italian Alps)

The fronts of two rock glaciers located in South Tyrol (Italian Alps) failed on 13 August 2014, initiating debris flows in their downslope channels. A multimethod approach including climate, meteorological, and ground temperature data analysis, aerial image correlation, as well as geotechnical testing and modeling, led to the reconstruction of the two events. An integrated investigation of static predisposing factors, slowly changing preparatory factors, and potential triggering events shed light on the most likely reasons for such failures. Our results suggest that the occurrence of front destabilization at the two rock glaciers can only partly be explained by the occurrence of heavy rainfall events. Indeed, antecedent hydrological and thermal ground conditions were characterized by a saturated active layer favored by a snow-rich winter and extensive precipitation in late spring and summer. Also, the rising trend of air temperature during spring and summer months since 1950s might explain the concurrent marked displacement of the two rock glaciers. Indeed, geotechnical investigations have provided strong indications that one of the investigated rock glacier fronts was at a marginally stable state prior to 2014. As rainfall events more intense than the one that occurred in August 2014 were previously recorded in the same area without resulting failures at the studied rock glaciers, we propose that both predisposing and preparatory destabilizing factors have played a key role in the 2014 rock glacier front failures.     

Restoration of submerged vegetation in shallow eutrophic lakes – A guideline and state of the art in Germany

One of the most serious problems caused by eutrophication of shallow lakes is the disappearance of submerged macrophytes and the switch to a turbid, phytoplankton-dominated state. The reduction of external nutrient loads often does not result in a change back to the macrophyte-dominated state because stabilising mechanisms that cause resilience may delay a response. Additional internal lake restoration measures may therefore be needed to decrease the concentration of total phosphorus and increase water clarity. The re-establishment of submerged macrophytes required for a long-term stability of clear water conditions, however, may still fail, or mass developments of tall-growing species may cause nuisance for recreational use. Both cases are often not taken into account when restoration measures are planned in Germany, and existing schemes to reduce eutrophication consider the topic inadequately. Here we develop a step-by-step guideline to assess the chances of submerged macrophyte re-establishment in shallow lakes. We reviewed and rated the existing literature and case studies with special regard on (1) the impact of different internal lake restoration methods on the development of submerged macrophytes, (2) methods for the assessment of natural re-establishment, (3) requirements and methods for artificial support of submerged macrophyte development and (4) management options of macrophyte species diversity and abundance in Germany. This guideline is intended to help lake managers aiming to restore shallow lakes in Germany to critically asses and predict the potential development of submerged vegetation, taking into account the complex factors and interrelations that determine their occurrence, abundance and diversity.     

Evaluation of MIVIS Hyperspectral Data for Mapping Soil Degradation in an Upland Ecosystem of Southern Italy

Abstract

This paper describes the first stage of an experiment aiming to evaluate the potential and limitations of MIVIS data for mapping the degradational state of soils in a sub‐scene of a southern Apennines study area (Italy). After radiometric rectification of the image data and the collection of a field/laboratory spectral library, linear spectral mixture modelling (SMA) was used to decompose image spectra into fractions of spectrally distinct mixing components. Spectral endmember selection was based upon a principal component analysis (PCA) applied to a set of soil spectra, collected from the spectral library. The resulting abundance estimates (fractions) trough SMA were then analysed to identify soil conditions and to obtain an improved measure of dry and green vegetation cover. A map of soil conditions and dry‐green vegetation abundance, based upon MIVIS data was then derived from normalised fractions of soil‐vegetation endmembers obtained from SMA.     

Semantic and syntactic interoperability in online processing of big Earth observation data

ABSTRACT

The challenge of enabling syntactic and semantic interoperability for comprehensive and reproducible online processing of big Earth observation (EO) data is still unsolved. Supporting both types of interoperability is one of the requirements to efficiently extract valuable information from the large amount of available multi-temporal gridded data sets. The proposed system wraps world models, (semantic interoperability) into OGC Web Processing Services (syntactic interoperability) for semantic online analyses. World models describe spatio-temporal entities and their relationships in a formal way. The proposed system serves as enabler for (1) technical interoperability using a standardised interface to be used by all types of clients and (2) allowing experts from different domains to develop complex analyses together as collaborative effort. Users are connecting the world models online to the data, which are maintained in a centralised storage as 3D spatio-temporal data cubes. It allows also non-experts to extract valuable information from EO data because data management, low-level interactions or specific software issues can be ignored. We discuss the concept of the proposed system, provide a technical implementation example and describe three use cases for extracting changes from EO images and demonstrate the usability also for non-EO, gridded, multi-temporal data sets (CORINE land cover).