The lunar geochemistry of chromium and vanadium

Crystal/liquid partition coefficients for Cr, V, Mn, and Fe have been determined experimentally between olivine, orthopyroxene, clinopyroxene and silicate melt possesing the composition of a primitive lunar green glass, at oxygen fugacities appropriate to the lunar interior. These species all behave essentially as compatible elements and possess crystal/liquid partition coefficients mostly between 0.3 and 0.9. Partition coefficients for Cr, V, and Mn are generally similar to those of Fe. This implies that crystal/liquid fractionation processes in the lunar interior which do not involve the participation of spinels would not have been effective in fractionating MnO, CrO, and VO from FeO. The well-known constancy of FeO/MnO ratios in nearly all lunar rocks is a reflection of this behaviour. It is shown that comparably strong correlations between CrO-;FeO and VO-;FeO exist for lunar highland breccias and soils from all sites and that these correlations extend to primitive lunar volcanic glasses associated with mare volcanism, strongly suggesting that the CrO/FeO and VO/FeO ratios so derived are of global importance. The observed ratios characterizing differentiated regions of the Moon can be combined with the corresponding ratios for residual refractory portions of the Moon, using measured partition coefficients for Fe, Mg, Cr, V, and Mn between olivine, orthopyroxene and liquid. Bulk Moon abundances for Cr and V have been calculated for a range of reasonable assumptions concerning the petrogenetic relationships between differentiated portions of the Moon and complementary refractory residua consisting of olivine and orthopyroxene mineralogies. Because of the small differences in crystal liquid partition coefficients between FeO, CrO, and VO, these estimates are insensitive to large variations in the models. The bulk Moon is accordingly estimated to contain 2190–2463 ppm Cr and 79–95 ppm V. These values are very similar to the Cr and V contents of the Earth's mantle, estimated as 3010 ppm Cr and 81 ppm V by Sun (1982). The geochemical implications of these similarities are discussed.     

Varved sediments of Lake Yoa (Ounianga Kebir,Chad) reveal progressive drying of the Sahara during the last 6100 years

The sedimentological and geochemical properties of a 7·47 m long laminated sequence from hypersaline Lake Yoa in northern Chad have been investigated, representing a unique, continuous 6100 year long continental record of climate and environmental change in the eastern Central Sahara. These data were used to reconstruct the Mid to Late Holocene history of this currently hyper‐arid region, in order to address the question of whether the Mid Holocene environmental transition from a humid to a dry Sahara was progressive or abrupt. This study involved a suite of analyses, including petrographic and scanning electron microscope examination of thin sections, X‐ray diffraction, X‐radiography, granulometry, loss on ignition and magnetic susceptibility. The potential of micro‐X‐ray fluorescence core scanning was tested at very high resolution. Detailed microscopic investigation revealed the sedimentary processes responsible for the formation of the fine laminations, identified the season during which they were formed, and confirmed their annually rhythmic nature. High‐resolution X‐ray fluorescence core scanning allowed the distinction of each individual lamination over the entire record, opening new perspectives for the study of finely laminated sediment sequences. Geochemical and mineralogical data reveal that, due to decreasing monsoon rainfall combined with continuous and strong evaporation, the hydrologically open and fresh Mid Holocene Lake Yoa slowly evolved into the present‐day hypersaline brine depleted in calcium, which has existed for about the past 1050 years. During the oldest part of the investigated period, Lake Yoa probably contained a permanently stratified lower water column that was nevertheless disrupted relatively frequently by mixing events. Deep‐water anoxia became more stable because of increased salinity‐driven density stratification. In parallel, the sediment grain‐size proxies record a progressive increase of aeolian input in the course of the last 6100 years. Altogether, all geochemical and sedimentological indicators point to a progressive drying of the eastern Central Sahara, strengthening previous conclusions based on palaeoecological indicators.     

Environmental changes in northern New Zealand since the Middle Holocene inferred from stable isotope records (δ15N, δ13C) of Lake Pupuke

Maar lakes in the Auckland Volcanic Field are important high-resolution archives of Holocene environmental change in the Southern Hemisphere mid-latitudes. Stable carbon and nitrogen isotope analyses were applied on bulk organic matter and the green alga Botryococcus from a sediment core from Lake Pupuke (Auckland, North Island, New Zealand) spanning the period since 7,165?cal.?year BP. The origin of organic matter was established using total-organic?Ccarbon-to-nitrogen ratios (TOC/TN) as well as organic carbon (??¹³C_OM) and nitrogen (??¹⁵N) isotope composition of potential modern sources. This approach demonstrated that the contribution of allochthonous organic matter to the lake sediment was negligible for most of the record. The sedimentary TOC/TN ratios that are higher than Redfield ratio (i.e. >7) are attributed to N-limiting conditions throughout the record. Variations of nitrogen and carbon isotopes during the last 7,165?years are interpreted as changes in the dominant processes in the lake. While epilimnetic primary productivity controlled isotope composition before 6,600?cal.?year BP, microbial processes, especially denitrification and methane oxidation, caused overall shifts of the ??¹⁵N and ??¹³C values since the Mid-Holocene. Comparisons with climate reconstructions from the Northern Island suggest that changes in the wind-induced lake overturn and a shift to more pronounced seasonality were the most likely causes for lake-internal changes since 6,600?cal.?year BP.     

Experimental impact cratering: A summary of the major results of the MEMIN research unit

This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two-stage light-gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane-driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high-temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.     

A note on climate change adaptation for seaports: a challenge for global ports, a challenge for global society

With 80 % of world trade carried by sea, seaports provide crucial linkages in global supply-chains and are essential for the ability of all countries to access global markets. Seaports are likely to be affected directly and indirectly by climatic changes, with broader implications for international trade and development. Due to their coastal location, seaports are particularly vulnerable to extreme weather events associated with increasing sea levels and tropical storm activity, as illustrated by hurricane “Sandy”. In view of their strategic role as part of the globalized trading system, adapting ports in different parts of the world to the impacts of climate change is of considerable importance. Reflecting the views of a diverse group of stakeholders with expertise in climate science, engineering, economics, policy, and port management, this essay highlights the climate change challenge for ports and suggests a way forward through the adoption of some initial measures. These include both “soft” and “hard” adaptations that may be spearheaded by individual port entities, but will require collaboration and support from a broad range of public and private sector stakeholders and from society at large. In particular, the essay highlights a need to shift to more holistic planning, investment and operation.     

Lower crustal melting and the role of open-system processes in the genesis of syn-orogenic quartz diorite–granite–leucogranite associations: constraints from Sr–Nd–O isotopes from the Bandombaai Complex, Namibia

The Bandombaai Complex (southern Kaoko Belt, Namibia) consists of three main intrusive rock types including metaluminous hornblende- and sphene-bearing quartz diorites, allanite-bearing granodiorites and granites, and peraluminous garnet- and muscovite-bearing leucogranites. Intrusion of the quartz diorites is constrained by a U–Pb zircon age of 540±3 Ma.

Quartz diorites, granodiorites and granites display heterogeneous initial Nd- and O isotope compositions (_{Nd (540 Ma)}=−6.3 to −19.8; δ¹⁸O=9.0–11.6‰) but rather low and uniform initial Sr isotope compositions (⁸⁷Sr/⁸⁶Sr_initial=0.70794–0.70982). Two leucogranites and one aplite have higher initial ⁸⁷Sr/⁸⁶Sr ratios (0.70828–0.71559), but similar initial _Nd (−11.9 to −15.8) and oxygen isotope values (10.5–12.9‰). The geochemical and isotopic characteristics of the Bandombaai Complex are distinct from other granitoids of the Kaoko Belt and the Central Zone of the Damara orogen. Our study suggests that the quartz diorites of the Bandombaai Complex are generated by melting of heterogeneous mafic lower crust. Based on a comparison with results from amphibolite-dehydration melting experiments, a lower crustal garnet- and amphibole-bearing metabasalt, probably enriched in K₂O, is a likely source rock for the quartz diorites. The granodiorites/granites show low Rb/Sr (<0.6) ratios and are probably generated by partial melting of meta-igneous (intermediate) lower crustal sources by amphibole-dehydration melting. Most of the leucogranites display higher Rb/Sr ratios (>1) and are most likely generated by biotite-dehydration melting of heterogeneous felsic lower crust. All segments of the lower crust underwent partial melting during the Pan-African orogeny at a time (540 Ma) when the middle crust of the central Damara orogen also underwent high T, medium P regional metamorphism and melting. Geochemical and isotope data from the Bandombaai Complex suggest that the Pan-African orogeny in this part of the orogen was not a major crust-forming episode. Instead, even the most primitive rock types of the region, the quartz diorites, represent recycled lower crustal material.     

Textural segmentation of digital rock images into bedding units using texture energy and cluster labels

The texture of digital rock images, as recorded, for instance, with borehole imaging devices, is shown to reflect different bedding types. Textural segmentation of borehole images, therefore, subdivides the recorded sequence into bedding units. We show that a textural segmentation algorithm based on the concept of texture energy achieves good results when compared with synthetic as well as real data in which petroleum geologists have performed zonations on cores. Texture energy involves filtering of the original image with a set of texture sensitive masks. The filtering is done as a finite convolution over the size of the masks. On the resulting images the variance is computed over a relatively large sliding window, which, in its practical implementation, covers the full width of the image. The resulting nine one-dimensional curves are then clustered hierarchically into a user-determined number of image texture or lithological bedding classes. Principal component analysis previous to clustering can be used to reduce redundancy in the data. A recurring and relatively ill-defined problem in this field are macro-textures, i.e., the cyclic interbedding of two or more bedding types. We show that sliding Fourier transforms and variable mask scale can successfully address the zonation of macro-textures. In general, the method gives best results with mask sizes equivalent to 2–4 centimeters, reflecting the length scale at which the investigated geological bedding seems to have its highest variation.     

Simulated Climate Change Effects on Year-Round Water Temperatures in Temperate Zone Lakes

A deterministic, one-dimensional model is presented to simulate daily water temperature profiles and associated ice and snow covers for dimictic and polymictic lakes of the temperate zone. The lake parameters required as model input are surface area (A_s), maximum depth (H_MAX), and Secchi depth (z_s), the latter, used as a measure of light attenuation and trophic state. The model is driven by daily weather data and operates year-round over multiple years. The model has been tested with extensive data (over 5,000 temperature points). Standard error between simulated and measured water temperatures is 1.4°C in the open water season and 0.5°C in the ice cover season. The model is applied to simulate the sensitivity of Minnesota lake water temperature characteristics to climate change. The projected climate changes due to a doubling of atmospheric CO₂ are obtained from the output of the Canadian Climate Center General Circulation Model (CCC GCM) and the Goddard Institute of Space Studies General Circulation Model (GISS GCM). Simulated lake temperature characteristics have been plotted in a coordinate system with a lake geometry ratio (A _s ^0.25 /H_MAX) on one axis and Secchi depth on the other. The lake geometry ratio expresses a lake's susceptibility to stratification. By interpolation, the sensitivity of lake temperature characteristics to changes of water depth and Secchi depth under the projected climate scenarios can therefore be obtained. Selected lake temperature characteristics simulated with past climate conditions (1961–1979) and with a projected 2 × CO₂ climate scenario as input are presented herein in graphical form. The simulation results show that under the 2 × CO₂ climate scenario ice formation is delayed and ice cover period is shortened. These changes cause water temperature modifications throughout the year.