Late Glacial ice advances in southeast Tibet

The sensitivity of Tibetan glacial systems to North Atlantic climate forcing is a major issue in palaeoclimatology. In this study, we present surface exposure ages of erratic boulders from a valley system in the Hengduan Mountains, southeastern Tibet, showing evidence of an ice advance during Heinrich event 1. Cosmogenic nuclide analyses (¹⁰Be and ²¹Ne) revealed consistent exposure ages, indicating no major periods of burial or pre-exposure. Erosion-corrected (3 mm/ka) ¹⁰Be exposure ages range from 13.4 to 16.3 ka. This is in agreement with recalculated exposure ages from the same valley system by [Tschudi, S., Schäfer, J.M., Zhao, Z., Wu, X., Ivy-Ochs, S., Kubik, P.W., Schlüchter, C., 2003. Glacial advances in Tibet during the Younger Dryas? Evidence from cosmogenic ¹⁰Be, ²⁶Al, and ²¹Ne. Journal of Asian Earth Sciences 22, 301–306.]. Thus this indicates that local glaciers advanced in the investigated area as a response to Heinrich event 1 cooling and that periglacial surface adjustments during the Younger Dryas overprinted the glacial morphology, leading to deceptively young exposure ages of certain erratic boulders.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

The Glarus thrust: excursion guide and report of a field trip of the Swiss Tectonic Studies Group (Swiss Geological Society, 14.–16. 09. 2006)

This excursion guide results form a field trip to the Glarus nappe complex organized by the Swiss Tectonic Studies Group in 2006. The aim of the excursion was to discuss old and recent concepts related to the evolution of the Glarus thrust. The major aspects were (i) the interplay between deformation, fluid flow and geochemical alteration, (ii) episodic versus continuous deformation and fluid flow, and (iii) the link between large-scale structures, microstructures, and geochemical aspects. Despite 150 years of research in the Glarus nappe complex and the new results discussed during the excursion, there exist controversies that still are unsolved.     

Oxidation and metal-insertion in molybdenite surfaces: evaluation of charge-transfer mechanisms and dynamics

Molybdenum disulfide (MoS₂), a layered transition-metal dichalcogenide, has been of special importance to the research community of geochemistry, materials and environmental chemistry, and geotechnical engineering. Understanding the oxidation behavior and charge-transfer mechanisms in MoS₂ is important to gain better insight into the degradation of this mineral in the environment. In addition, understanding the insertion of metals into molybdenite and evaluation of charge-transfer mechanism and dynamics is important to utilize these minerals in technological applications. Furthermore, a detailed investigation of thermal oxidation behavior and metal-insertion will provide a basis to further explore and model the mechanism of adsorption of metal ions onto geomedia.     

Perthite microstructure in magmatic alkali feldspar with oscillatory zoning; Weinsberg Granite, Upper Austria

Feldspar megacrysts from the Weinsberg granite (Moldanubian Zone) show oscillatory zoning with respect to the albite- and orthoclase components. All growth zones show perthitic exsolutions which take the form of bleb- and lens shaped albite-rich precipitates in an orthoclase-rich host. The average sizes and shapes of the precipitates show systematic variation with the integrated bulk compositions of the respective growth zones. The precipitates are abundant and relatively small in growth zones with intermediate bulk composition (Or50Ab41An09 - Or80Ab18An02), and they are less abundant and larger in more orthoclase-rich zones (Or88Ab11An01). Small precipitates have a relatively high aspect ratio, whereas the large precipitates in the potassium-rich zones are more spherical. The relation between microstructure and integrated bulk composition suggests that exsolution and subsequent growth and coarsening occurred by different mechanisms in the respective growth zones. Numerical modeling shows that rapid growth of precipitates over extended periods of time and attainment of relatively large final size is favored, if only few nuclei are formed in an oversaturated host. In contrast, precipitates can grow rapidly only over limited time intervals and remain relatively small, if abundant nuclei are present. During cooling of the oscillatorily zoned alkali-feldspar, exsolution started at relatively high temperatures in growth zones of intermediate integrated bulk composition as compared to exsolution in the more orthoclase-rich growth zones. Irrespective of whether exsolution occurred by spinodal decomposition or by nucleation at relatively high temperatures in the growth zones of intermediate integrated bulk composition, it produced abundant nuclei and resulted in relatively small precipitates. In contrast, comparatively few nuclei were formed in the orthoclase-rich growth zones resulting in large precipitates. The Na/K partitioning between precipitates and the host is independent of the integrated bulk composition of the respective growth zone reflecting re-equilibration during cooling down to relatively low temperatures (<?400°C). The shape of the precipitates probably has evolved from an initially lamellar or spindle-like geometry with high aspect ratio to more isometric, spheroidal shapes during precipitate growth and coarsening. Host/precipitate interfaces served as fluid pathways during late stage deuteric alteration.     

Hydrochemical variation in the springs water between Jerusalem–Ramallah Mountains and Jericho Fault,Palestine

The spatial and temporal changes of the composition of the groundwater from the springs along the Wadi Qilt stream running from the Jerusalem–Ramallah Mountains towards the Jericho Plain is studied during the hydrological year 2006/2007. The residence time and the intensity of recharge play an important role in controlling the chemical composition of spring water which mainly depends on distance from the main recharge area. A very important factor is the oxidation of organics derived from sewage and garbage resulting in variable dissolved CO₂ and associated HCO₃ ⁻ concentration. High CO₂ yields lower pH values and thus under-saturation with respect to calcite and dolomite. Low CO₂ concentrations result in over-saturation. Only at the beginning and at the end of the rainy season calcite saturation is achieved. The degradation of dissolved organic matter is a major source for increasing water hardness. Besides dissolution of carbonates dissolved species such as nitrate, chloride, and sulfate are leached from soil and aquifer rocks together with only small amounts of Mg. Mg not only originates from carbonates but also from Mg–Cl waters are leached from aquifer rocks. Leaching of Mg–Cl brines is particularly high at the beginning of the winter season and lowest at its end. Two zones of recharge are distinguishable. Zone 1 represented by Ein Fara and Ein Qilt is fed directly through the infiltration of meteoric water and surface runoff from the mountains along the eastern mountain slopes with little groundwater residence time and high flow rate. The second zone is near the western border of Jericho at the foothills, which is mainly fed by the under-groundwater flow from the eastern slopes with low surface infiltration rate. This zone shows higher groundwater residence time and slower flow rate than zone 1. Groundwater residence time and the flow rate within the aquifer systems are controlled by the geological structure of the aquifer, the amount of active recharge to the aquifer, and the recharge mechanism. The results of this study may be useful in increasing the efficiency of freshwater exploitation in the region. Some precautions, however, should be taken in future plans of artificial recharge of the aquifers or surface-water harvesting in the Wadi. Because of evaporation and associated groundwater deterioration, the runoff water should be artificially infiltrated in zones of Wadis with high storage capacity of aquifers. Natural infiltration along the Wadis lead to evaporation losses and less quality of groundwater.     

Correction to: Leveraging HPC accelerator architectures with modern techniques — hydrologic modeling on GPUs with ParFlow

Computational Geosciences - A Correction to this paper has been published: https://doi.org/10.1007/s10596-021-10065-y     

Impact of drilling mud on chemistry and microbiology of an Upper Triassic groundwater after drilling and testing an exploration well for aquifer thermal energy storage in Berlin (Germany)

After completion of an exploration well, sandstones of the Exter Formation were hydraulically tested to determine the hydraulic properties and to evaluate chemical and microbial processes caused by drilling and water production. The aim was to determine the suitability of the formation as a reservoir for aquifer thermal energy storage. The tests revealed a hydraulic conductivity of 1–2 E-5 m/s of the reservoir, resulting in a productivity index of 0.6–1 m³/h/bar. A hydraulic connection of the Exter Formation to the overlaying, artesian “Rupelbasissand” cannot be excluded. Water samples were collected for chemical and microbiological analyses. The water was similarly composed as sea water with a maximum salinity of 24.9 g/L, dominated by NaCl (15.6 g/L Cl and 7.8 g/L Na). Until the end of the tests, the water was affected by drilling mud as indicated by the high pH (8.9) and high bicarbonate concentration (359 mg/L) that both resulted from the impact of sodium carbonate (Na₂CO₃) additives. The high amount of dissolved organic matter (>?58 mg/L) and its molecular-weight distribution pattern indicated that residues of cellulose, an ingredient of the drilling mud, were still present at the end of the tests. Clear evidence of this contamination gave the measured uranine that was added as a tracer into the drilling mud. During fluid production, the microbial community structure and abundance changed and correlated with the content of drilling mud. Eight taxa of sulfate-reducing bacteria, key organisms in processes like bio-corrosion and bio-clogging, were identified. It can be assumed that their activity will be affected during usage of the reservoir.     

A brief review of Agenian rhinocerotids in Western Europe

The Agenian is the earliest Neogene European Land Mammal Age. It encompasses the mammalian zones MN1 (23.03–22.7 Ma) and MN2 (22.7–20.0 Ma) and roughly coincides with the Aquitanian standard age. Agenian mammalian assemblages from Western Europe encompass a mixture of rhinocerotid taxa of Oligocene affinities and of Miocene newcomers, mostly recorded in France, Germany, Switzerland, and to a lesser extent, Spain. Rhinocerotidae are documented by seven species referred to five genera (Pleuroceros pleuroceros, Protaceratherium minutum, Plesiaceratherium aquitanicum, Mesaceratherium paulhiacense, Diaceratherium lemanense, D. asphaltense, and D. aginense), further attesting to a low suprageneric diversity. Their systematics, morphology, ecology, stratigraphical and geographical ranges are detailed in the present article. Occurrences and geographical ranges of all seven rhinocerotid species are illustrated on palaeogeographical maps of the circum-Mediterranean region at 23 Ma (MN1) and 21 Ma (MN2). The richest Agenian localities (Paulhiac, MN1; Laugnac, MN2) record a specific diversity similar to that of Orleanian rhinocerotid assemblages, with up to five/six associated species. All Agenian rhinocerotid species from Western Europe are endemic to the concerned region, which is consistent with the complete geographic isolation of Western Europe by earliest Miocene times. However, all five genera are documented by twin species in coeval localities of South and Central Asia, which implies (1) vicariant speciation events by latest Oligocene times and (2) the existence of intermittent pathways for terrestrial megamammals such as rhinocerotids during the concerned interval.