Kinematic evolution of thrusts wedge and erratic line length balancing: insights from deformed sandbox models

Kinematic evolution of fold-thrust structures has been investigated by analogue models that include syntectonic sedimentation. Different decollement dips and basement thicknesses produced different wedge geometries and propagating characteristics. A model with one decollement level was characterized by a closely spaced thrust system during early stages of shortening as compared to the late stages. The frequency of fault nucleation was rapid during the early stages of deformation. Conversely, the frequency of fault nucleation was low and thrust spacing was significantly wider in a model with two decollement levels. Individual faults became locked at steep dips and deformation stepped forward as a new fault nucleated in-sequence in front of the older locked structure. Once the thrust system was established up to 27 % overall shortening, an overlying bed was introduced to simulate syntectonic deformation. Model sand wedge did not grow self similarly but rather its length and height increased episodically with deformation. Restoration of deformed models show that layer parallel shortening accommodated for approximately half of the total model shortening across the multilayers. Calculated error in apparent layer shortening from the restored layers revealed a direct relation with depth of the layers in the models. The experimental results are comparable to a natural example from the Northern Apennines fold-and-thrust belts.     

Holocene sea-surface temperature variability in the Chilean fjord region

Here we provide three new Holocene (11–0 cal ka BP) alkenone-derived sea surface temperature (SST) records from the southernmost Chilean fjord region (50–53°S). SST estimates may be biased towards summer temperature in this region, as revealed by a large set of surface sediments. The Holocene records show consistently warmer than present-day SSTs except for the past ~ 0.6 cal ka BP. However, they do not exhibit an early Holocene temperature optimum as registered further north off Chile and in Antarctica. This may have resulted from a combination of factors including decreased inflow of warmer open marine waters due to lower sea-level stands, enhanced advection of colder and fresher inner fjord waters, and stronger westerly winds. During the mid-Holocene, pronounced short-term variations of up to 2.5°C and a cooling centered at ~ 5 cal ka BP, which coincides with the first Neoglacial glacier advance in the Southern Andes, are recorded. The latest Holocene is characterized by two pronounced cold events centered at ~ 0.6 and 0.25 cal ka BP, i.e., during the Little Ice Age. These cold events have lower amplitudes in the offshore records, suggesting an amplification of the SST signal in the inner fjords.     

Fuzzy parameters analysis of time‐dependent fracture of concrete dam models

In order to apply the mechanical properties (measured on material specimens or laboratory‐sized models) to large structures (such as concrete dams), a non‐linear theory able to predict the size‐scale effect has to be used. One of these theories was first proposed by Hillerborg and co‐workers (fictitious crack model) and is based on the earlier works by Barenblatt and Dugdale for metals (cohesive crack model). It is based on the existence of a fracture process zone (FPZ), where the material undergoes strain softening. The behaviour of the material outside the FPZ is linear elastic. A large number of short‐time laboratory tests were executed, by varying the load, under crack mouth opening displacement control. Since concrete exhibits a time‐dependent behaviour, an interaction between creep and micro‐crack growth occurs in the FPZ. Therefore, different testing conditions can be applied: rupture can be achieved by keeping the load constant before peak value (pre‐peak tests), or after peak value and after an unloading and reloading procedure (post‐peak tests). The crack propagation rate is shown to be small enough to neglect inertial forces and large enough to keep the time‐dependent behaviour of the process zone as dominant compared to the behaviour of the undamaged and viscoelastic zone. Due to the variability in material microstructure from one specimen to another, experimental data show large ranges of scatter. Well established methods in probability theory require sufficient experimental data in order to assume a probability density distribution. The objective of this study is to investigate the ranges of variation of the time response under constant load in simple structural elements associated with pre‐selected variation (fuzziness) in the main material parameters. For situations where the values of the material parameters are of a non‐stochastic nature, the fuzzy set approach to modelling variability has been proposed as a better and more natural approach. Copyright © 2002 John Wiley & Sons, Ltd.     

Late Quaternary colluvial deposits in the Bocaina Plateau,southeastern Brazil highlands: age and palaeoenvironmental consequences

Despite the generalized occurrence of colluvial deposits in the humid tropical areas of southeastern Brazil, regional correlation is difficult because the deposits are discontinuous, and chronological data are very scarce and scattered. For the first time, colluvial deposits in the Bocaina Plateau are described, including 18 radiocarbon ages from 12 profiles. The plateau is located on the eastern flank of the Continental Rift of Southeastern Brazil and is the highest part of the Serra do Mar, with elevations up to 2000 m above sea level. Because the Bocaina Plateau is part of the summit surfaces of southeastern Brazil, it was subjected to specific climatic conditions during the Quaternary. Colluvial deposits on the lower hillslopes and edges of amphitheatres can show complex sequences with up to three intercalated dark humic horizons, corresponding to Late Pleistocene and Holocene phases of morphodynamic activity and pedogenesis. Ages of palaeosols vary from 650±50 a BP to 36 880±980 a BP. Landforms and colluvia on the Bocaina Plateau are very similar to those found on the opposite flank of the continental rift, on the Campos do Jordão Plateau. Ages of buried soils point to similar soil formation and colluviation episodes in the two plateaus. As in Campos do Jordão, the succession of erosive, depositional and pedogenetic processes on the altos campos hillslopes is probably related to late Quaternary climate changes.     

Comparison of cosmic‐ray exposure ages and trapped noble gases in chondrule and matrix samples of ordinary,enstatite, and carbonaceous chondrites

Abstract— We performed a comprehensive study of the He, Ne, and Ar isotopic abundances and of the chemical composition of bulk material and components of the H chondrites Dhajala, Bath, Cullison, Grove Mountains 98004, Nadiabondi, Ogi, and Zag, of the L chondrites Grassland, Northwest Africa 055, Pavlograd, and Ladder Creek, of the E chondrite Indarch, and of the C chondrites Hammadah al Hamra 288, Acfer 059, and Allende. We discuss a procedure and necessary assumptions for the partitioning of measured data into cosmogenic, radiogenic, implanted, and indigenous noble gas components. For stone meteorites, we derive a cosmogenic ratio ²⁰Ne/²²Ne of 0.80 ± 0.03 and a trapped solar ⁴He/³He ratio of 3310 ± 130 using our own and literature data. Chondrules and matrix from nine meteorites were analyzed. Data from Dhajala chondrules suggest that some of these may have experienced precompaction irradiation by cosmic rays. The other chondrules and matrix samples yield consistent cosmic‐ray exposure (CRE) ages within experimental errors. Some CRE ages of some of the investigated meteorites fall into clusters typically observed for the respective meteorite groups. Only Bath's CRE age falls on the 7 Ma double‐peak of H chondrites, while Ogi's fits the 22 Ma peak. The studied chondrules contain trapped ²⁰Ne and ³⁶Ar concentrations in the range of 10^?6–10^?9 cm³ STP/g. In most chondrules, trapped Ar is of type Q (ordinary chondritic Ar), which suggests that this component is indigenous to the chondrule precursor material. The history of the Cullison chondrite is special in several respects: large fractions of both CR‐produced ³He and of radiogenic ⁴He were lost during or after parent body breakup, in the latter case possibly by solar heating at small perihelion distances. Furthermore, one of the matrix samples contains constituents with a regolith history on the parent body before compaction. It also contains trapped Ne with a ²⁰Ne/²²Ne ratio of 15.5 ± 0.5, apparently fractionated solar Ne.     

Oceanography of the Chilean Patagonia

Chilean Patagonia is one of the most extended fjord regions in the world that covers nearly 240,000 km² with an extremely complex coastline and topography in one of the least densely populated areas of the country (1–8 inhabitants every 10 km²). In recent years, the area has been undergoing somewhat intense pressure since several commercial projects in hydroelectricity, tourism, and commercial salmon and mytilid cultures have been developed, or are in progress. Concomitantly, several large research programs have been devised to study the physical, chemical, and biological environment of Patagonia, such as the CIMAR FIORDO, and recently COPAS Sur-Austral based at Universidad de Concepcion, that attempts to close the bridge between oceanographic knowledge and its use by society.In this introductory article we summarize the collection of papers comprising this Special Issue of Continental Shelf Research. These papers deal with aspects of regional oceanography and geology, inorganic and organic geochemistry, ecology of pelagic and benthic organisms, and past changes in productivity.     

Contrasting radon background levels in volcanic settings: clues from 220Rn activity concentrations measured during long-term deformation experiments

To better understand the mechanisms leading to different radon background levels in volcanic settings, we have performed two long-term deformation experiments of 16 days using a real-time setup that enables us to monitor any variation of radon activity concentration during rock compression. Our measurements demonstrate that, in the case of highly porous volcanic rocks, the emanating power of the substrate changes as a function of the volcanic stress conditions. Constant magmatic pressures, such as those observed during dike intrusions and hydrothermal fluid injections, can result in pervasive pore collapse that is mirrored by a significant radon decrease until a constant emanation is achieved. Conversely, repeated cycles of stress due to, for example, volcano inflation/deflation cycles, cause a progressive radon increase a few days (but even weeks and months) before rupture. After rock failure, however, the formation of new emanation surfaces leads to a substantial increase of the radon signal. Our results suggest that surface deformation in tectonic and volcanic settings, such as inflation/deflation or constant magmatic pressures, have important repercussions on the emanating power of volcanic substrates.     

Analyse de sensibilité globale du modèle CATHY aux propriétés hydrodynamiques du sol d’un micro-bassin agricole drainé

Résumé

Une étude d’analyse de sensibilité globale d’une application du modèle hydrologique CATHY (CATchment HYdrology) sur un bassin sous influence de drains agricoles a été réalisée en utilisant les méthodes Morris, FAST99 (Fourier Amplitude Sensitivity Test) et Sobol2002. Ces analyses ont permis d’identifier les paramètres les plus sensibles sur : (a) l’écoulement aux drains et (b) les flux sortant du micro-bassin agricole Bras d’Henri (Québec, Canada). Des 24 paramètres évalués par la méthode de Morris, les neuf et huit paramètres ayant été respectivement très influents sur les deux variables de sortie, ont été analysés par les méthodes FAST99 et Sobol2002. Il s’ensuit que la conductivité hydraulique horizontale à saturation dans les couches sous les drains est la propriété hydrodynamique la plus influente sur les deux variables de sortie. Cette étude démontre que des efforts devraient être portés sur la caractérisation de l’anisotropie du sol, car celle-ci n’est pas à négliger lors d’une modélisation hydrologique tridimensionnelle.

Editeur Z.W. Kundzewicz     

The definition of potential infiltration areas in Guaratinguetá watershed, Paraíba do Sul Basin, Southeastern Brazil: an integrated approach using physical and land-use elements

This work describes the methodological approach used for mapping the potential infiltration areas of the Guaratinguetá watershed (160?km²), situated in Southeastern Brazil. The method is considered a qualitative approach, which takes into account thematic maps (geology, pedology, geomorphology, and land use/land cover) and the precipitation spatial distribution. A group of experts in Earth Sciences and Geotechnical Engineering has applied an infiltration potential scale factor that ranges from 5 (highest influence) to 1 (lowest influence). The final infiltration map was produced using several ArcGIS^? tools. The results showed that the most suitable (very high) infiltration areas represent only around 7% of the watershed area, which are associated with smooth and gentle hills, fluvial Tertiary sediments and yellow oxisols. However, growing impacts caused by land farming and urban developments require urgent planning for this region. Areas with high to moderate capacity of infiltration represent around 56% of the watershed and are found in the domain of igneous-metamorphic rocks associated with steep hill-slopes and relatively well-preserved forest fragments. This region requires a land-use strategy, such as reforestation programs, in order to increase the infiltration capacity of the watershed.