Dating carbonate rocks with in-situ produced cosmogenic Be: Why it often fails

Surface exposure dating of carbonate rocks using cosmogenic ¹⁰Be is problematic. We have performed step-wise leaching of calcite-rich samples in order to investigate the reasons for this. Results on different grain size fractions clearly indicate the source of atmospheric ¹⁰Be is clay. We demonstrate that partial-leaching procedures, which result in moderate pH levels will not release ¹⁰Be (in-situ produced or atmospheric) due to the instant re-absorption on grain surfaces. By contrast, under strongly acidic conditions, all absorbed ¹⁰Be is leached from aluminosilicates giving abnormally high ¹⁰Be concentrations and consequently exposure ages that are too old. Dating is only possible if samples do not contain any clay minerals or if they can be removed prior to carbonate dissolution.     

Strain localization as a key to reconciling experimentally derived flow-law data with dynamic models of continental collision

Published strength profiles predict strength discontinuities within and/or at the base of continental crust during compression. We use finite element models to investigate the effect of strength discontinuities on continental collision dynamics. The style of deformation in model crust during continued subduction of underlying mantle lithosphere is controlled by: (1) experimental flow-law data; (2) the crustal geotherm; (3) strain localization by erosion; (4) strain-softening and other localization effects. In the absence of erosion and other factors causing strain localization, numerical models with typical geothermal gradients and frictional/ductile rheologies predict diffuse crustal deformation with whole-scale detachment of crust from mantle lithosphere. This prediction is at odds with earlier model studies that only considered frictional crustal rheologies and showed asymmetric, focused crustal deformation. Without localization, model deformation is not consistent with that observed in small collisional orogens such as the Swiss Alps. This suggests that strain localization by a combination of erosion and rheological effects such as strain softening must play a major role in focusing deformation, and that strength profiles derived under constant strain rates and uniform material properties cannot be used to infer crustal strength during collision dynamics.     

Rutile occurrence and trace element behavior in medium-grade metasedimentary rocks: example from the Erzgebirge, Germany

Metamorphic textures in medium-grade (~500–550°C) metasedimentary rocks from the Erzgebirge give evidence of prograde rutile crystallization from ilmenite. Newly-crystallized grains occur as rutile-rich polycrystalline aggregates that pseudomorph the shape of the ilmenites. In-situ trace element data (EMP and SIMS) show that rutiles from the higher-grade samples record large scatter in Nb content and have Nb/Ti ratios higher than coexisting ilmenite. This behavior can be predicted using prograde rutile crystallization from ilmenite and indicates that rutiles are reequilibrating their chemistry with remaining ilmenites. On the contrary, rutiles from the lowest grade samples (~480°C) have Nb/Ti ratios that are similar to the ones in ilmenite. Hence, rutiles from these samples did not equilibrate their chemistry with remaining ilmenites. Our data suggest that temperature may be one of the main factors determining whether or not the elements are able to diffuse between the phases and, therefore, reequilibrate. Newly-crystallized rutiles yield temperatures (from ~500 to 630°C, Zr-in-rutile thermometry) that are in agreement with the metamorphic conditions previously determined for the studied rocks. In quartzites from the medium-grade domain (~530°C), inherited detrital rutile grains are detected. They are identified by their distinct chemical composition (high Zr and Nb contents) and textures (single grains surrounded by fine grained ilmenites). Preliminary calculation, based on grain size distribution of rutile in medium-grade metapelites and quartzites that occur in the studied area, show that rutiles derived from quartzites can be anticipated to dominate the detrital rutile population, even if quartzites are a minor component of the exposure.     

GGR Biennial Critical Review: Analytical Developments Since 2014

This GGR biennial critical review covers developments and innovations in key analytical methods published since January 2014, relevant to the chemical, isotopic and crystallographic characterisation of geological and environmental materials. In nine selected analytical fields, publications considered to be of wide significance are summarised, background information is provided and their importance evaluated. In addition to instrumental technologies, this review also presents a summary of new developments in the preparation and characterisation of rock, microanalytical and isotopic reference materials, including a précis of recent changes and revisions to ISO guidelines for reference material characterisation and reporting. Selected reports are provided of isotope ratio determinations by both solution nebulisation MC‐ICP‐MS and laser ablation‐ICP‐MS, as well as of radioactive isotope geochronology by LA‐ICP‐MS. Most of the analytical techniques elaborated continue to provide new applications for geochemical analysis; however, it is noted that instrumental neutron activation analysis has become less popular in recent years, mostly due to the reduced availability of nuclear reactors to act as a neutron source. Many of the newer applications reported here provide analysis at increasingly finer resolution. Examples include atom probe tomography, a very sensitive method providing atomic scale information, nanoscale SIMS, for isotopic imaging of geological and biological samples, and micro‐XRF, which has a spatial resolution many orders of magnitude smaller than conventional XRF.     

A comparison of the climatology of a tropospherestratosphere-mesosphere model with observations

Mean fields from a perpetual January simulation of a GCM extending from the surface to 0.01 hPa (near 80 km) are compared to observations. The zonal mean temperature and wind fields correspond quite well with reality; the low stratosphere, especially in the polar night, is too cold, but warmer than in the original version of the model, with an upper boundary at 25 hPa. Mean fields at standard levels show that the major features of the troposphere are represented by the model, but rather over emphasised; the stratospheric winter polar vortex is too strong, too cold, and too barotropic; it resembles an `undisturbed' January rather than the climatology. Differences in the stationary eddy activity between the extended and orginal versions of the model are noted, and used to explain some differences between the two simulations.This paper was presented at the International Conference on Modelling of Global Climate Change and Variability, held in Hamburg 11–15 September 1989 under the auspices of the Meteorological Institute of the University of Hamburg and the Max Planck Institute für Meteorology. Guest Editor for these papers is Dr. L. Dümenil     

Biosensors for marine pollution research,monitoring and control

Measurement of ecological, climatic and anthropogenic changes underpins the formulation of effective management strategies for sustainable use and protection of the marine environment. Sensors are traditionally used in marine studies to determine physical parameters, but there is increasing demand for real-time information about chemical and biological parameters. These parameters are currently measured in samples collected at sea and subsequently analysed in the laboratory. Biosensors fuse the exquisite sensitivity and specificity of living systems with the processing power of microelectronics to deliver simple, inexpensive measurement systems for use in the field or deployment in situ. While their potential for use in the marine environment is enormous, much published work to date has focussed on applications in freshwater and wastewater. Marine applications pose a substantial challenge in the robustness required for remote application, but recent developments in portable medical devices and receptor design suggest that these demands can now be realistically tackled.     

Presolar nanodiamonds: faster, cleaner, and limits on platinum-HL

We have developed a procedure that allows extraction of clean nanodiamond samples from primitive meteorites for isotopic analyses of trace elements on a timescale of just a week. This procedure includes microwave digestion and optimization of existing isolation techniques for further purification. Abundances of trace elements that are difficult to dissolve using standard procedures (e.g., Ir) are lower in the diamond residues prepared using the new technique. Accelerator mass spectrometry (AMS) was explored as a means for isotopic measurements. Results obtained on diamond fractions from Allende and Murchison show the need for suitable matrix-adjusted standards to correct for fractionation effects; nevertheless they allow putting an upper limit on the abundance of ¹⁹⁸Pt-H in nanodiamonds of ∼1 × 10¹⁴ atoms/g. This limit is on the order of what can be expected from predictions of competing nucleosynthesis models and extrapolation of the apparently mass dependent abundance trend of the associated noble gases.Unfortunately, and unexpectedly, presolar silicon carbide is almost quantitatively dissolved during microwave digestion with HCl/HF/HNO₃. Re-evaluation of the standard extraction technique, however, shows that it also may lead to severe loss of fine-grained SiC, a fact not commonly appreciated. A lower limit to SiC abundance in Murchison is 20 ppm, and previous conclusions that Murchison SiC is unusually coarse-grained compared to SiC in other primitive meteorites seem not to be warranted. Graphite and silicon nitride may survive and possibly can be separated after this step as suggested by a simulation experiment using terrestrial analog material, but the detailed behavior of meteoritic graphite requires further study.     

High spatio-temporal resolution measurements of cohesive sediment erosion

In this study, we present a novel approach to measure fundamental processes of cohesive sediment erosion. The experimental setup consists of a laboratory erosion flume (SETEG) and a photogrammetric method to detect sediment erosion (PHOTOSED). Detailed data are presented for three erosion experiments, which were conducted with a natural non-cohesive/cohesive sediment mixture at increasing sediment depths (4, 8, 16 cm). In each experiment, the sediment was exposed to a set of incrementally increasing shear stresses and the erosion was measured dynamically, pixel-based, and approximate to the process scale given the resolution of PHOTOSED. This enables us to distinguish between (i) individual emerging erosion spots caused by surface erosion and (ii) large holes torn open by detached aggregate chunks. Moreover, interrelated processes were observed, such as (iii) propagation of the erosion in the longitudinal and lateral direction leading to merging of disconnected erosion areas and (iv) progressive vertical erosion of already affected areas. By complementing the (bulk) erosion volume profiles with additional quantitative variables, which contain spatial information (erosion area, specific deepening, number of disconnected erosion areas), conclusions on the erosion behaviour (and the dominant processes) can be drawn without requiring qualitative information (such as visual observations). In addition, we provide figures indicating the spatio-temporal erosion variability and the (bulk) erosion rates for selected time periods. We evaluate the variability by statistical quantities and show that significant erosion is mainly confined to only a few events during temporal progression, but then considerably exceeds the time-averaged median of the erosion (factors between 7.0 and 16.0). Further, we point to uncertainties in using (bulk) erosion rates to assess cohesive sediment erosion and particularly the underlying processes. As a whole, the results emphasise the need to measure cohesive sediment erosion with high spatio-temporal resolution to obtain reliable and robust information. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Sea-level change, carbon cycling and palaeoclimate during the Late Cenomanian of northwest Europe; an integrated palaeoenvironmental analysis

A new high resolution sea-level curve for the Late Cenomanian M. geslinianum Zone has been generated using sequence stratigraphic analysis on transects through the margins of the Anglo-Paris Basin in the UK and Saxony Basin in Germany. Transgressive sediments that bury a rocky shoreline in the Dresden area have proved particularly useful in determining both the absolute amount of sea-level change and the rate of rise. After a brief fall at the base of the M. geslinianum Zone, sea level rose rapidly through the higher part of the zone, resulting in an overall short term eustatic rise of 22–28 m. Biostratigraphy and carbon isotope stratigraphy have enabled detailed correlations to be made between marginal locations and thick, relatively complete, basinal successions. The basinal successions at Eastbourne, UK, and Gröbern, Germany, provide both geochemical proxies for palaeoenvironmental change, including oxygen and carbon isotope records, and an orbital timescale graduated in precession and eccentricity cycles. Integration of the sea-level history with palaeoclimate evolution, palaeoceanography and changes in carbon cycling allows a detailed reconstruction of events during the Late Cenomanian. Orbital forcing on long eccentricity maxima provides the underlying drive for these changes, but amplification by tectonic events and feedback mechanisms augmented the orbital effects and made the Cenomanian/Turonian Boundary Event distinctive. In particular, variations in atmospheric CO₂ caused by oceanic drawdown and a brief period of intense volcanic outgassing resulted respectively in short term cooling and warming events. The magnitude and high rates (up to 1 m/1 kyr) of sea-level rise are diagnostic of glacioeustasy, however improbable this may appear at the height of the Cretaceous greenhouse.