Inter-manufacturer Difference and Temperature Dependency of the Fall-Rate of T-5 Expendable Bathythermograph

The fall-rate of the T-5 expendable bathythermograph (XBT) produced by Tsurumi Seiki (TSK) Co., Ltd and that by Sippican Inc., are intercompared by a series of contemporaneous and colocated measurements with conductivity-temperature-depth (CTD) profilers. It is confirmed that the fall-rates of the two manufacturers' T-5 differ by about 5 percent, despite the fact that they had been believed to be identical for many years. The cause of the difference is discussed on the basis of a detailed cross-examination of the two T-5 models. It is found for the first time that the two models are different in several respects. The manufacturer's fall-rate equation is only applicable to the Sippican T-5, for which Boyd and Linzell's (1993) equation seems to be slightly more accurate. Kizu et al.'s (2005) equation gives a clearly less biased depth than the manufacturers' equation for the TSK T-5. It is also found that the fall-rates of both T-5 models are dependent on water temperature, perhaps because of viscosity. The temperature-dependency of the fall-rate of the TSK T-5 is larger than that of the Sippican T-5.     

High-resolution seismic stratigraphy of the Yamato Basin, Japan Sea and its geological application

Abstract High-resolution seismic stratigraphy of the Yamato Basin, Japan Sea, was successfully established using core-log-seismic data integration. The construction of synthetic seismograms by the combination of physical properties and well-log data from the Ocean Drilling Program (ODP) Site 797 was the key to accomplishing the high-resolution seismic stratigraphy. To achieve resolution comparable with well-log data and core lithology, single channel seismic reflection data taken from ODP underway geophysics were reprocessed, and then carefully compared with synthetic seismogram, core and well log profiles to identify seismic units. Ten seismic stratigraphic units were identified at the site, and seismic stratigraphic interpretation was successfully extended from the site to the nearby area along the Yamato Basin margin. The opal-A/opal-CT (biogenic silica/metastable diagenetic silica) boundary has different appearances at places from strong to weak, and mostly discontinuous. One of the significant results achieved from this study is clear distinction of the opal-A/CT boundary from a very strong reflector, which appears at 22 m below the opal-A/CT boundary. Through well-log and physical properties characterization of the different units, resistivity was found to be the best indicator of diatom content and with gamma-ray it also is an indicator of chert layers in the opal-CT zone. Velocity is not greatly effected by diatom ooze in the opal-A zone, however, it shows strong peaks and has an indirect relationship with gamma-ray in the opal-CT zone. Finally, successful correlation of Gamma-ray Attenuation Porosity Evaluator density and resistivity peaks with strong seismic reflectors from upper and lower stratified layers may provide new information on the late Neogene paleoceanography of the Japan Sea in high-resolution scale.     

A modified normalized input-output minimization （Mod-NIOM） method for seismic wave propagation modeling

A new method for wave propagation modeling is introduced in this paper. By using the constraint optimization (Lagrange multiplier) method, the sum of weighted squared Fourier amplitudes is minimized when subjected to a constraint. The sum of the maximum amplitudes obtained from all output models is normalized to unity and is taken as a constraint. In this method, all the actual time histories are considered as outputs and dealt with equally. Independently of the combinations of time histories (or the first ...     

Comparison of carbon cycle between the western Pacific subarctic and subtropical time-series stations: highlights of the K2S1 project

A comparative study of ecosystems and biogeochemistry at time-series stations in the subarctic gyre (K2) and subtropical region (S1) of the western North Pacific Ocean (K2S1 project) was conducted between 2010 and 2013 to collect essential data about the ecosystem and biological pump in each area and to provide a baseline of information for predicting changes in biologically mediated material cycles in the future. From seasonal chemical and biological observations, general oceanographic settings were verified and annual carbon budgets at both stations were determined. Annual mean of phytoplankton biomass and primary productivity at the oligotrophic station S1 were comparable to that at the eutrophic station K2. Based on chemical/physical observations and numerical simulations, the likely “missing nutrient source” was suggested to include regeneration, meso-scale eddy driven upwelling, meteorological events, and eolian inputs in addition to winter vertical mixing. Time-series observation of carbonate chemistry revealed that ocean acidification (OA) was ongoing at both stations, and that the rate of OA was faster at S1 than at K2 although OA at K2 is more critical for calcifying organisms.     

Rapid tectonics of the Late Miocene Boso accretionary prism related to the Izu–Bonin arc collision

Abstract   The structure, paleomagnetism and biostratigraphy of the Nishizaki and Kagamigaura formations on the southern Boso Peninsula, central Japan, were investigated to determine the chronographic constraints on the accretion, post-Late Miocene rotation and regional tectonics in the Izu–Bonin island arc collision zone. The geological structures on the southern Boso Peninsula are characterized by an east–west trending and south-verging fold and thrust belt that curves toward the northwest–southeast in the northwest extent of the Nishizaki Formation. Two stages of tectonic rotation were revealed by paleomagnetic and structural studies. The first is believed to have occurred after the accretion of the Nishizaki Formation and before the deposition of the Kagamigaura Formation, while the second is confidently correlated with the 1 Ma Izu block collision. The northwest extent of the Nishizaki Formation was rotated clockwise by approximately 65–80°, whereas the rotation was only 25–30° in the east, and 11–13° in the overlying Kagamigaura Formation. Radiolarian biostratigraphy suggests a depositional age of 9.9–6.8 Ma (Upper Miocene period) for the Nishizaki Formation and 4.19-3.75 Ma (Pliocene period) for the lower Kagamigaura Formation. These results indicate that the age of accretion and first-stage rotation of the Nishizaki Formation can be constrained to the interval of 6.80–3.75 Ma. This structure most likely represents the northward bending caused by collisions of the Tanzawa and Izu blocks with the Honshu island arc, and suggests rapid processes of accretion, collision, uplift and the formation of new sedimentary basins within a relatively short period of time (2.61–3.05 my).     

Geochemistry of adakitic quartz diorite in the Yamizo Mountains, central Japan: Implications for Early Cretaceous adakitic magmatism in the inner zone of southwest Japan

Abstract   Small-volume plutons of Early to Late Cretaceous ages are widely distributed in the Yamizo Mountains, central Japan. These plutons consist predominantly of granitoids, classified into hornblende gabbro, quartz diorite, hornblende–biotite granodiorite and coarse-grained biotite granite. The quartz diorite (52–64 wt% of SiO₂) is characterized by a high Sr content (606–769 p.p.m.) associated with a low Y (13–27 p.p.m.) and heavy rare earth element content (Yb content of 1.19–2.13 p.p.m.). On the Sr/Y versus Y diagram, this rock type mainly plots in the adakite and Archean high-Al tonalite, trondhjemite and granodiorite (TTG) field. Together with its initial Sr isotopic ratios, which range from 0.7038 to 0.7046, these data suggest that quartz diorite originated as slab melts. However, geochemical calculations assuming either eclogite or garnet amphibolite as the source material do not support this suggestion. Instead, the chemical compositions of quartz diorite are better explained by the fractional crystallization of hornblende, plagioclase and biotite from a primitive, basaltic melt in a magma chamber. In this case, the formation of the associated hornblende gabbro can also be explained by the accumulation of hornblende and plagioclase. Adakitic rocks of Early Cretaceous ages have also been reported in the Tamba Belt of the inner zone of southwest Japan, located ca 500 km west of the Yamizo Mountains. These rocks can be correlated to the adakitic rocks in the Yamizo Mountains based on the geology, petrography, geochemistry and radiometric ages. Therefore, we propose the possibility that the Early Cretaceous adakitic rocks in the inner zone of southwest Japan were produced by fractional crystallization from basaltic arc magmas generated by a partial melting of metasomatized wedge mantle peridotite.     

Particulate Thiol Peptides Along a Salinity Gradient of a Metal-Contaminated Estuary

The thiol peptide phytochelatins (PC2; the polymer with n = 2) are efficient metal-chelating compounds produced by phytoplankton and higher plants. Both PC2 and their precursor glutathione (GSH) are related to detoxification mechanisms. GSH and PC2 were quantified using liquid chromatography with fluorescent detection and observed in the particulate phase along a salinity gradient of the Tamar Estuary (SW UK), a heavily metal impacted site, at concentrations up to 274 and 16.5 μmol (g chl a)⁻¹, respectively. The peptides predominated within low (0–5) and mid-salinities (5–20). Down-estuary, at sites farther from metal sources and salinities higher than 20, PC2 showed a sharp decrease or were not detected. High PC2/GSH ratios indicated areas with augmented concentrations of bioavailable metals at the tidal limit, near Cu mines and the mid-estuary where resuspension of sediments occurs. By following typical partitioning patterns previously reported for dissolved Cu and Zn, the production of thiol peptides, notably PC2, reflected a rapid interaction between the particulate and dissolved phases.