Application of a 3-D chemical fate prediction model (FATE3D) to predict dioxin concentrations in the Tokyo Bay

A 3-D chemical fate prediction model (FATE3D) was applied to predict the dioxin concentrations in the seawater of Tokyo Bay, Japan. The simulations were carried out for a period of one year (from September 2002 to August 2003). Parameters such as meteorological data, flow field conditions, concentrations and sinking rates of organic particulate matter, initial and boundary conditions, and loading fluxes and physico-chemical properties of dioxins were used as the model inputs.The simulation results compared favorably with the field measurements of dioxin concentrations in the bay for both the particulate and dissolved phases, indicating the validity and predictive capability of the model. Furthermore, the differences in the seasonal cycles and distributions between the particulate- and dissolved-phase dioxins in the bay were estimated from the simulation results.However, the particulate-phase dioxin concentrations in the bottom layers (+1 m from the bottom) were underestimated, probably because the resuspension process was not taken into account in the model. The improvement of the model's predictive capability, including the resuspension process, shall be the focus of our next study.     

Stable isotope and chemical composition of pearls: Biomineralization in cultured pearl oysters in ago bay, Japan

The δ¹⁸O, δ¹³C and trace element composition of pearls collected from Ago Bay, Japan, were investigated in order to evaluate biomineralization in the cultured pearl oyster (Pinctada fucata martensii). The oxygen isotopic data suggest that the pearls were produced around 23–24°C, mainly in June to early July, which is consistent with their occurrence in the field. Therefore the pearls were produced under or close to isotopic equilibrium conditions, although they showed high calcification rates (higher than 0.2–1.0 g cm^{− 2}yr⁻¹) under which, for example, coral skeletons (calcification rate ∼0.28 g cm^{− 2}yr⁻¹) often show non-equilibrium isotope partitioning. The δ¹³C values were ∼− 2.9‰ lower than those calculated for offshore waters under equilibrium conditions. This may be due to low-δ¹³C bottom waters resulting from the degradation of organic matter (OM) or to a contribution of low-δ ¹³C food. In the latter case, a simple mass balance calculation gives a respiration component of 14%. Twelve trace elements of bulk pearl samples were classified into four groups on the basis of their enrichment/depletion patterns relative to seawater and inter-element relationships: group 1, Co, Cr, Pb; group 2, Ba, Cs, U; group 3, Cu, Sn, V, and group 4, Mn, Rb, Mo. Comparison with coral skeletons suggests that Ba and Mn (groups 2 and 4) were definitely much enriched in proteinaceous OM relative to aragonite crystals in pearls and that V (group 3) in pearls showed only slight enrichment in the organicrich layer. By contrast, the other elements showed small differences between both layers (enrichment factor of <3), suggesting that these elements occur largely in aragonite crystals.     

A numerical experiment on the sedimentation processes in the Yellow Sea and the East China Sea

Sedimentation processes of suspended matter supplied from the Huanghe (Yellow River) and the Changjiang are investigated with the use of a three-dimensional numerical model of the Yellow Sea and the East China Sea which includes the tidal current, residual flow and wind waves. Suspended matter supplied from the Huanghe mainly deposits in the Bohai Sea and that from the old river mouth of the Huanghe and from the Changjiang in the central part of the Yellow Sea or south of Cheju Island. The calculated results well reproduce the observed sedimentation pattern qualitatively except for the offshore area of the southeastern coast of China.     

Distribution of Phyllosoma Larvae (Crustacea: Decapoda: Palinuridae,Scyllaridae and Synaxidae) in the Western North Pacific

Phyllosoma larvae were identified and their distribution was examined, based on the larvae in ichthyoplankton samples collected in the Japanese Eel Expedition to the spawning area of A. japonica in the western North Pacific from August 30 to September 13, 1986 (Leg. 1), and from September 22 to 25, 1986 (Leg. 2), on board the R/V Hakuho-maru. Phyllosoma larvae belonged to 3 families (Scyllaridae, Palinuridae and Synaxidae) representing 6 genera and 14 species. A total of 336 palinurid and synaxid phyllosoma larvae were collected, of which 233 larvae (about 70%) were identical with P. longipes s. l, while a total of 362 scyllarid phyllosoma larvae were collected, of which 274 larvae (about 76%) were identical with S. cultrifer. Phyllosoma larvae of P. longipes s. l and S. cultrifer showed a similar distribution to each other. The larvae were abundant in the water close to Mariana Islands, although late stage examples were abundant in waters of Luzon and eastern Taiwan. Distributions of these larvae may be related intimately with the North Equatorial Current existing along 15°N. The North Equatorial Current approaches the eastern coast of the Philippines and then separates into two branches of northward and southward flows. The northward flow contributes to generating the Kuroshio Current while the southward flow goes to generate the Mindanao Current. Judging from distributions of phyllosoma larvae in the present study, it is assumed that the larvae of the above two species may have been released in Mariana Islands and transported westward from there through the North Equatorial Current. These larvae may then be transported to eastern Taiwanese waters.     

Study on the chemical forms of radionuclides in seawater—I

The stability constants for sulfate, chloride and hydroxide ions with cerium (III) in the solution at ionic strength of 0.67 have been determined by cation exchange method, the values of ₁ and ₂ for sulfate complexes of cerium being 40±13 and 453±140, respectively and those for chloride complexes being 1.28±0.23 and 0.56±0.076, respectively. The values of ₁, ₂ and ₃ for hydroxide complexes of cerium were (4.5±0.9)×10⁷, (3.3±0.7)×10¹⁴ and (1.8±0.7)×10²³, respectively.Using the above constants the ratios of individual chemical species of¹⁴⁴Ce were calculated in a solution at ionic strength of 0.67 containing sulfate and chloride ions approximately the same as in seawater of 35 %. The result of calculation indicates that the dominant species of¹⁴⁴Ce in this solution is Ce(OH)₃ ⁰ at pH 8.     

Effects of scattering and dust grain size on the temperature structure of protoplanetary discs: a three-layer approach

The temperature in the optically thick interior of protoplanetary discs is essential for the interpretation of millimetre observations of the discs, for the vertical structure of the discs, for models of the disc evolution and the planet formation, and for the chemistry in the discs. Since large icy grains have a large albedo even in the infrared, the effect of scattering of the diffuse radiation in the discs on the interior temperature should be examined. We have performed a series of numerical radiation transfer simulations, including isotropic scattering by grains with various typical sizes for the diffuse radiation as well as for the incident stellar radiation. We also have developed an analytic model including isotropic scattering to understand the physics concealed in the numerical results. With the analytic model, we have shown that the standard two-layer approach is valid only for grey opacity (i.e. grain size ≳10 μm) even without scattering. A three-layer interpretation is required for grain size ≲10 μm. When the grain size is 0.1–10 μm, the numerical simulations show that the isotropic scattering reduces the temperature of the disc interior. This reduction is nicely explained by the analytic three-layer model as a result of the energy loss by scatterings of the incident stellar radiation and of the warm diffuse radiation in the disc atmosphere. For grain size ≳10 μm (i.e. grey scattering), the numerical simulations show that the isotropic scattering does not affect the interior temperature. This is nicely explained by the analytic two-layer model; the energy loss by scattering in the disc atmosphere is exactly offset by the 'green-house effect' due to the scattering of the cold diffuse radiation in the interior.     

Concentrations of Trace Elements in Carbonate Reference Materials Coral JCp-1 and Giant Clam JCt-1 by Inductively Coupled Plasma-Mass Spectrometry

Trace elements in the Geological Survey of Japan carbonate reference materials Coral JCp-1 and Giant Clam JCt-1 were determined by inductively coupled plasma-mass spectrometry after digestion with 2% v/v HNO₃. A standard addition method was adopted in this determination in order to neutralise the Ca matrix effect. In addition, Sc, Y, In and Bi were used as internal standards to control the matrix effect and correct instrumental drift. Of the eighteen elements measured in JCp-1, precisions for fourteen elements, including Cu, Cd and Ba, were better than 10% RSD and concentrations ranged from 0.002 μg g^-1 (Cs) to 8.02 μg g^-1 (Ba). The concentrations of measured trace elements in JCt-1, except for Cu, were lower than those in JCp-1. Precisions for all elements with concentrations higher than 0.04 μg g^-1 in JCt-1 were also better than 10% RSD and concentrations were found to be between 0.001 μg g^-1 (Cs) and 4.84 μg g^-1 (Ba). The concentrations of more than fifteen trace elements in the aragonite reference materials are reported here for the first time. Both reference materials are suitable for use in geochemical studies of environmental reconstruction based upon biogenic carbonate materials.     

Experimental and analytical studies on earthquake resisting behaviour of confined concrete block masonry structures

To improve the seismic performance of masonry structures, confined masonry that improves the seismic resistance of masonry structures by the confining effect of surrounding bond beams and tie columns is constructed. This study investigated the earthquake resisting behaviour of confined masonry structures that are being studied and constructed in China. The structural system consists of unreinforced block masonry walls with surrounding reinforced concrete bond beams and tie columns. The characteristics of the structure include: (1) damage to blocks is reduced and brittle failure is avoided by the comparatively lower strength of the joint mortar than that of the blocks, (2) the masonry walls and surrounding reinforced concrete bond beams and tie columns are securely jointed by the shear keys of the tie columns. In this study, wall specimens made of concrete blocks were tested under a cyclic lateral load and simulated by a rigid body spring model that models non‐linear behaviour by rigid bodies and boundary springs. The results of studies outline the resisting mechanism, indicating that a rigid body spring model is considered appropriate for analysing this type of structure. Copyright © 2006 John Wiley & Sons, Ltd.     

Crustal structure and accurate hypocenter determination along the Longmenshan fault zone

Ｃｒｕｓｔａｌｓｔｒｕｃｔｕｒｅａｎｄａｃｃｕｒａｔｅｈｙｐｏｃｅｎｔｅｒｄｅ┐ｔｅｒｍｉｎａｔｉｏｎａｌｏｎｇｔｈｅＬｏｎｇｍｅｎｓｈａｎｆａｕｌｔｚｏｎｅＺＨＵＺＨＡＯ１）（赵珠）ＪＵＮＦＡＮ１）（范军）ＳＩ－ＨＵＡＺＨＥＮＧ２）（郑斯华）ＡＫ...     

Optimal placement of sensors on buildings subjected to intermediate‐storey excitation according to QN control method

An algorithm to calculate direct velocity feedback gain with limited number of sensors is developed in a simple way such that a certain performance index is minimized according to QN control method. If a limited number of velocity outputs can be measured, full velocity responses of the whole structure can be interpolated based on the mode shapes. By defining the performance index function as a combination of the structure's velocity responses and control forces only, feedback gain can be determined according to QN control method with the external excitation being taken into account throughout the entire algorithm. Control forces are then regulated by the time‐invariant feedback gain matrix. The effective location of the active control devices for a building structure subjected to intermediate‐storey excitation has been determined to be in the three floors adjacent to the vibration source. Hence for the purpose of this paper, only the optimal placement of sensors is verified. It is shown in this paper that if the dynamic behaviour of the structure is well described by a mathematical model, sufficient response reduction effect can be achieved according to the new DVFC algorithm, and the degradation of control performance due to time delay can also be verified. Copyright © 2001 John Wiley & Sons, Ltd.