Mapping block-and-ash flow hazards based on Titan 2D simulations: a case study from Mt. Taranaki,NZ

Numerical models for simulation of mass flows are typically focussed upon accurately predicting the paths, travel times and inundation from a single flow or collapse event. When considering catchment-based hazards from a volcano, this is complicated by often being faced with several possible scenarios. Over the last 800 years at Mt. Taranaki/Egmont, a number of dome growth and collapse events have resulted in the genesis and emplacement of block-and-ash flows (BAFs). Each BAF was directed northwestward by a breach in the crater rim. The latest dome collapse events in the AD 1880s and AD 1755 inundated the northwestern flank and had run-out lengths 10 km from source. Future activity of this type could have a devastating effect on the Taranaki region’s communities, infrastructure and economy. Hazard planning has involved constructing volcanic hazard maps based upon the areas inundated by past volcanic flows, with little consideration of present-day topography. Here, a numerical geophysical mass flow modelling approach is used to forecast the hazards of future comparable BAF events on NW Mt. Taranaki. The Titan2D programme encompasses a “shallow water”, continuum solution-based, granular flow model. Flow mechanical properties needed for this approach include estimates of internal and basal friction as well as the physical dimensions of the initial collapse. Before this model can be applied to Taranaki BAFs, the input parameters must be calibrated by simulating a range of past collapse events. By using AD 1860 and AD 1755 scenarios, initial collapse volumes can be well constrained and internal and basal friction angles can be evaluated through an iterative approach from previous run-out lengths. A range of possible input parameters was, therefore, determined to produce a suite of potentially inundated areas under present-day terrain. A suite of 10 forecasts from a uniformly distributed range were combined to create a map of relative probabilities of inundation by future BAF events. These results were combined in a GIS package to produce hazard zones related to user-specified hazard thresholds. Using these input parameter constraints, future hazard forecasts for this scale and type of event can also take into account changing summit and topographic configurations following future eruptive or collapse events.     

Transport of Crustacean Larvae Between a Low-Inflow Estuary and Coastal Waters

The effectiveness of larval behavior in regulating transport between well-mixed, low-inflow estuaries and coastal waters in seasonally arid climates is poorly known. We determined the flux of an assemblage of benthic crustacean larvae relative to physical conditions between a shallow estuary and coastal waters on the upwelling coast of northern California (38°18′N, 123°03′W) from 29 to 31 March 2006. We detected larval behaviors that regulate transport in adjacent coastal waters and other estuaries for only two taxa in the low-inflow estuary, but they were apparent for taxa outside the estuary. Vertical mixing in the shallow estuary may have overwhelmed larvae of some species, or salinity fluctuations may have been too slight to cue tidal vertical migrations. Nevertheless, all larval stages of species that complete development in nearshore coastal waters were present in the estuary, because they remained low in the water column reducing seaward advection or they were readily exchanged between the estuary and open coast by tidal flows. Weak tidal flows and gravitational circulation at the head of the estuary reduced seaward transport during development for species that completed development nearshore, whereas larval release during nocturnal ebb tides enhanced seaward transport for species that develop offshore. Thus, nonselective tidal processes dominated larval transport for most species back and forth between the low-inflow estuary and open coastal waters, whereas in adjacent open coastal waters, larval behavior in the presence of wind-induced shear was more important in regulating migrations between adult and larval habitats along this upwelling coast.     

Changes to sediment sources following wildfire in a forested upland catchment,southeastern Australia

Few investigations link post‐fire changes to sediment sources and erosion processes with sediment yield response at the catchment scale. This linkage is essential if downstream impacts on sediment transport after fire are to be understood in the context of fire effects across different forest environments. In this study, we quantify changing source contributions to fine sediment (<63 µm) exported from a eucalypt forest catchment (136 ha) burnt by wildfire. The study catchment is one of a pair of research catchments located in the East Kiewa River valley in southeastern Australia that have been the subject of a research program investigating wildfire effects on runoff, erosion, and catchment sediment/nutrient exports. This previous research provided the opportunity to couple insights gained from a range of measurement techniques with the application of fallout radionuclides ¹³⁷Cs and ²¹⁰Pb_ex to trace sediment sources. It was found that hillslope surface erosion dominated exports throughout the 3·5‐year post‐fire measurement period. During this time there was a pronounced decline in the proportional surface contribution from close to 100% in the first six months to 58% in the fourth year after fire. Over the study period, hillslope surface sources accounted for 93% of the fine sediment yield from the burnt catchment. The largest decline in the hillslope contribution occurred between the first and second years after fire, which corresponded with the previously reported large decline in sediment yield, breakdown of water repellency in burnt soils, substantial reduction in hillslope erodibility, and rapid surface vegetation recovery. Coupling the information on sediment sources with hillslope process measurements indicated that only a small proportion of slopes contributed sediment to the catchment outlet, with material derived from near‐channel areas dominating the post‐fire catchment sediment yield response. Copyright © 2011 John Wiley & Sons, Ltd.     

Martian rampart crater ejecta: Experiments and analysis of melt-water interaction

Viking images of Martian craters with rampart-bordered ejecta deposits reveal distinct impact ejecta morphology when compared to that associated with similar-sized craters on the Moon and Mercury. Topographic control of distribution, lobate and terraced margins, cross-cutting relationships, and multiple stratigraphic units are evidence for ejecta emplacement by surface flowage. It is suggested that target water explosively vaporized during impact alters initial ballistic trajectories of ejecta and produces surging flow emplacement. The dispersal of particulates during a series of controlled steam explosions generated by interaction of a thermite melt with water has been experimentally modeled. Preliminary results indicate that the mass ratio of water to melt and confining pressure control the degree of melt fragmentation (ejecta particle size) and the energy and mode of melt-ejecta dispersal. Study of terrestrial, lobate, volcanic ejecta produced by steam-blast explosions reveals that particle size and vapor to clast volume ratio are primary parameters characterizing the emplacement mechanism and deposit morphology. Martian crater ramparts are formed when ejecta surges lose fluidizing vapors and transported particles are deposited en masse. This deposition results from flow yield strength increasing above shear stress due to interparticle friction.     

Radio evidence of twisted bi-polar magnetic fields in the solar corona

Observations of bi-polar type I storm centers with the Culgoora radioheliograph operating at 80 MHz show that in many cases they are not oriented as we should expect for emission in the ordinary mode and for the simplest magnetic field geometry. We interpret this as evidence for a twist in the magnetic field.     

Pyroclastic Flow Hazard at Volcán Citlaltépetl

Volcán Citlaltépetl (Pico de Orizaba) with an elevation of 5,675 m is the highest volcano in North America. Its most recent catastrophic events involved the production of pyroclastic flows that erupted approximately 4,000, 8,500, and 13,000 years ago. The distribution of mapped deposits from these eruptions gives an approximate guide to the extent of products from potential future eruptions. Because the topography of this volcano is constantly changing computer simulations were made on the present topography using three computer algorithms: energy cone, FLOW2D, and FLOW3D. The Heim Coefficient (), used as a code parameter for frictional sliding in all our algorithms, is the ratio of the assumed drop in elevation (H) divided by the lateral extent of the mapped deposits (L). The viscosity parameter for the FLOW2D and FLOW3D codes was adjusted so that the paths of the flows mimicked those inferred from the mapped deposits. We modeled two categories of pyroclastic flows modeled for the level I and level II events. Level I pyroclastic flows correspond to small but more frequent block-and-ash flows that remain on the main cone. Level II flows correspond to more widespread flows from catastrophic eruptions with an approximate 4,000-year repose period. We developed hazard maps from simulations based on a National Imagery and Mapping Agency (NIMA) DTED-1 DEM with a 90 m grid and a vertical accuracy of ±30 m. Because realistic visualization is an important aid to understanding the risks related to volcanic hazards we present the DEM as modeled by FLOW3D. The model shows that the pyroclastic flows extend for much greater distances to the east of the volcano summit where the topographic relief is nearly 4,300 m. This study was used to plot hazard zones for pyroclastic flows in the official hazard map that was published recently.     

Little River Experimental Watershed,a keystone in understanding of coastal plain watersheds

The US Department of Agriculture-Agricultural Research Service Southeast Watershed Research Laboratory (SEWRL) initiated a hydrologic research program on the Little River Experimental Watershed (LREW) in 1967. Long-term (52 years) streamflow data are available for nine sites, including rainfall-runoff relationships and hydrograph characteristics regularly used in research on interactive effects of climate, vegetation, soils, and land-use in low-gradient streams of the US EPA Level III Southeastern Plains ecoregion. A summary of prior research on the LREW illustrates the impact of the watershed on building a regional understanding of hydrology and water quality. Climatic and streamflow data were used to make comparisons of scale across the nine nested LREW watersheds (LRB, LRF, LRI, LRJ, LRK, LRO, LRN, LRM, and LRO3) and two regional watersheds (Alapaha and Little River at Adel). Annual rainfall for the largest LREW, LRB, was 1200 mm while average annual streamflow was 320 mm. Annual rainfall, streamflow, and the ratio between annual streamflow and rainfall (Sratio) were similar (α = 0.05) across LREWs LRB, LRF, LRI, LRJ, LRK, and LRO. While annual rainfall within the 275 ha LRO3 was found to be similar to LRO and LRM (α = 0.05), annual streamflow and Sratio were significantly different (α = 0.05). Comparisons of annual rainfall, streamflow, and Sratio between LRB and the regional watersheds indicated no differences (α = 0.05). Based upon this analysis, most regional watersheds shared similar hydrologic characteristics. LRO3 was an exception, where increases in row crops and decreases in forest coverage resulted in increased streamflow. LREW data have been instrumental in building considerable scientific understanding of flow and transport processes for these stream systems. Continued operation of the LREW hydrologic network will support hydrologic research as well as environmental quality and riparian research programs that address emerging and high priority natural resource and environmental issues.     

Debris-flow-dominated sediment transport through a channel network after wildfire

Field studies that investigate sediment transport between debris-flow-producing headwaters and rivers are uncommon, particularly in forested settings, where debris flows are infrequent and opportunities for collecting data are limited. This study quantifies the volume and composition of sediment deposited in the arterial channel network of a 14-km² catchment (Washington Creek) that connects small, burned and debris-flow-producing headwaters (<1 km²) with the Ovens River in SE Australia. We construct a sediment budget by combining new data on deposition with a sediment delivery model for post-fire debris flows. Data on deposits were plotted alongside the slope–area curve to examine links between processes, catchment morphometry and geomorphic process domains. The results show that large deposits are concentrated in the proximity of three major channel junctions, which correspond to breaks in channel slope. Hyperconcentrated flows are more prominent towards the catchment outlet, where the slope–area curve indicates a transition from debris flow to fluvial domains. This shift corresponds to a change in efficiency of the flow, determined from the ratio of median grain size to channel slope. Our sediment budget suggests a total sediment efflux from Washington Creek catchment of 61 × 10³ m³. There are similar contributions from hillslopes (43 ± 14 × 10³ m³), first to third stream order channel (35 ± 12 × 10³ m³) and the arterial fourth to fifth stream order channel (31 ± 17 × 10³ m³) to the total volume of erosion. Deposition (39 ± 17 × 10³ m³) within the arterial channel was higher than erosion (31 ± 17 × 10³ m³), which means a net sediment gain of about 8 × 10³ m³ in the arterial channel. The ratio of total deposition to total erosion was 0.44. For fines <63 μm, this ratio was much smaller (0.11), which means that fines are preferentially exported. This has important implications for suspended sediment and water quality in downstream rivers. © 2019 John Wiley & Sons, Ltd.     

SOIL,SUBSOIL, AND FOREST COMPOSITION IN SOUTH-CENTRAL MICHIGAN,USA

Although soil texture is an important predictor of upland forest composition in southern Michigan, the relationship in some areas is weak and other environmental factors may exert stronger control on species composition. One of these may be concealed subsoil lithology where coarse-textured glaciofluvial sediments are buried beneath finer-textured till. Samples of forest composition, soil, and subsoil characteristics from 48 less-disturbed woodlots in the south-central Lower Peninsula reveal that upland oaks and hickories are predominant where the till veneer is thin and sand and gravel are relatively near the surface. Where till is relatively thick and outwash is deeply buried, woodlot composition is sugar maple-beech. In each of these cases, soil texture is unrelated to stand composition. The likely effect of buried near-surface glaciofluvial sediments is moisture stress such that xeric species dominate these drier sites. The influence of subsoil on forest geography is a significant new finding with regard to southern Michigan and has possible application elsewhere in glaciated eastern North America.