江苏及南黄海地区历史地震类型分布特征

通过对江苏地区及南黄海海域历史地震资料特点分析，将研究区历史地震类型分为相对安全类和相对危险类，并对地震类型的统计结果、地理分布特征及构造进行探讨. 结果表明:① 江苏及南黄海地区绝大多数中强以上历史地震类型为相对安全类，仅有13.8%的中强以上历史地震为相对危险类；② 江苏陆地、长江口以东海域和南黄海北部坳陷地区以相对安全类地震为主，苏中沿海南黄海海域地震类型分布较为复杂，相对安全类和相对危险类地震类型比例基本相当；③ 研究区历史地震类型统计结果和空间分布特征与现代地震序列类型实况非常吻合，反映本区地震活动具有继承性的特点.研究结果可以作为江苏省地震应急工作中震后早期趋势判定的参考依据.      

2003年9月27日俄蒙中边界7.9级地震的中期预测及其重要意义

2003年9月27日在俄罗斯(靠近蒙古、中国边界)发生了7．9级地震。作者在两年前对俄蒙中边界7．9级地震作过中期预测，预测意见和这一巨震的比较表明：这一预测是成功的，预测的依据是清楚和明了的。这显示了12个8级左右巨震的空间有序图象。6对对应地震的迁移速度(v)的平均值为14．50km/a，6个v值的变化范围在10—22km/a之内。从而提出：在地壳深处(甚至上地幔上部)可能存在一种巨型结构，它在控制着这些巨震的有序和重复迁移。     

川陕丁家林金矿区探矿权的评估

为准确、客观估价丁家林金矿区探矿权价值，根据矿区地质报告中提交的储量级别、矿体控制程度和工程质量，确定了基础和可采储量、生产规模、矿山服务年限、贴现率、有关实物工作量等6项参数。综合运用贴现现金流量和重置成本法对探矿权进行评估，对达到详查程度的基础储量采用贴现现金流量法，控制程度低的资源量采用重置成本法，二者之和综合反映探矿权的价值。此方法适用于地质工作程度不均衡矿区的探矿权评估，贴现现金流量法要充分考虑储量的可信度和获利临界品位．重置成本法关键是准确确定有关的实物工作量。     

中国南方海相含油气保存单元的层次划分与综合评价

以最近十年中国南方的海相新区油气勘探评价成果为依托 ,以油气成藏和整体封闭保存体系评价为核心 ,在渝东—湘鄂西、中下扬子和滇黔桂三大区域划分出 9个有利区块 5 1个含油气保存单元 ,并将其归纳为四个层次。综合评价认为 ,方西和石柱保存单元具有较好的整体封存体系 ,属持续性含油气保存单元 ,为首选勘探目标 ;江汉盆地南部、句容—海安区块、南鄱阳坳陷、楚雄盆地东北部具备或基本具备整体封存条件 ,属于沉积重建型含油气保存单元 ,通过精细勘探可望获得商业性油气流 ;楚雄盆地西北部、南盘江坳陷、十万大山盆地和渝东—湘鄂西地区利川复向斜由于晚期强烈构造改造而仅存在部分封存体系 ,需要攻关探索 ;思茅、渝东—湘鄂西地区的花果坪和桑植—石门地区已失去整体封闭保存条件 ,仅局部存在封存体系 ,地质条件高度复杂 ,勘探风险甚高。     

土体各向异性的再认识

土体原生和次生各向异性有本质不同。从柔度矩阵的角度分析了弹性和弹塑性理论对各向异性的反映 ;复杂应力状态下砂土真三轴试验结果表明 ,次生各向异性对土体应力应变关系有很大影响 ,是土体特性的本质体现 ,在土工数值分析中应当充分考虑其影响。     

通渝隧道围岩变形的神经网络预测

隧道新奥法施工中 ,常以围岩变形量作为评判围岩稳定性和支护结构经济合理性的重要指标。公路隧道围岩变形量是随时间而变化的数据序列 ,因而可以建立一些实时跟踪预测模型和方法。根据通渝隧道围岩拱顶下沉位移变形的特性 ,采用神经网络技术来预测其变形量 ,结果表明该方法简易、有效     

地热井井位确定研究——以豫煤二队院内地热井为例

通过对龙门地热田地质构造、地下水运动特点及规律的研究，提出了在地热田内寻找地下热水的富水靶区，并推算了其范围。又以地面调查、地面电法等手段进行了验证，确定了地下热水富水带的具体位置及地热井施工井位，一次成功地打中千米以下地热水的富水区，为地热田内寻找、开发地下热水总结了经验，丰富了深井及地热田找水的理论。     

大汶河流域洪灾的成因及防治对策

阐述了大汶河流域洪涝灾害的特点,并对洪涝灾害发生的原因进行了分析,提出了预防为主、综合治理、系统防治和重点防治相结合、标本兼治的防治思路及具体防治对策.     

A new method of testing pile using dynamic P-S-curve made by amplitude of wave train

A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibration graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is discussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve. Foundation item: Key projects of the tenth Five-year Plan of Yunnan Province (documented Yunnan district [2002]54-02-02) and Geophysical Society of Yunnan Province.     

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.