Mudbank regime off the Kerala coast during monsoon and non-monsoon seasons

Field experiments conducted in the nearshore ocean to understand the dynamics of mudbank off Kerala, south-west coast of India, are highlighted. Real time monitoring of the nearshore ocean off Purakkad, Kerala was accomplished using pressure transducers for nearshore surface wave measurements, and current sensors for nearshore velocity measurements. Comprehensive information on the spatial structure of mudbank was obtained from aerial surveys. Extensive data collected on surface waves and currents in the nearshore ocean, indicate that the infra-gravity (IG) waves (leaky modes and trapped edge wave modes), and far infra-gravity (FIG) waves coupled with strong shoreline reflections and undertow play an important role in the dynamics associated with the mudbanks off Kerala during the monsoon season. During the non-monsoon season evidence for progressive edge waves in the infragravity frequency band, an energetic gravity wave band and a strong undertow with weak reflections was observed.     

Behaviour of radiogenic Pb in zircon during ultrahigh-temperature metamorphism: an ion imaging and ion tomography case study from the Kerala Khondalite Belt,southern India

Zircon crystals from a locally charnockitized Paleoproterozoic high-K metagranite from the Kerala Khondalite Belt (KKB) of southern India have been investigated by high-spatial resolution secondary ion mass spectrometry analysis of U–Th–Pb and rare earth elements (REE), together with scanning ion imaging and scanning ion tomography (depth-profiled ion imaging). The spot analyses constrain the magmatic crystallization age of the metagranite to ca. 1,850 Ma, with ultrahigh-temperature (UHT) metamorphism occurring at ca. 570 Ma and superimposed charnockite formation at ca. 520–510 Ma, while the ion imaging reveals a patchy distribution of radiogenic Pb throughout the zircon cores. Middle- to heavy-REE depletion in ca. 570 Ma zircon rims suggests that these grew in equilibrium with garnet and therefore date the UHT metamorphism in the KKB. The maximum apparent ²⁰⁷Pb/²⁰⁶Pb age obtained from the unsupported radiogenic Pb concentrations is also consistent with formation of the Pb patches during this event. The superimposed charnockitization event appears to have caused additional Pb-loss in the cores and recrystallization of the rims. The results of depth-profiling of the scanning ion tomography image stack show that the Pb-rich domains range in size from <5 nm to several 10 nm (diameter if assumed to be spherical). The occurrence of such patchy Pb has previously been documented only from UHT metamorphic zircon, where it likely results from annealing of radiation-damaged zircon. The formation of a discrete, heterogeneously distributed and subsequently immobile Pb phase effectively arrests the normal Pb-loss process seen at lower grades of metamorphism.     

印度东南部海岸拉梅斯沃勒姆滨外保克湾底层水特征对底栖有孔虫的影响

有孔虫生活在海洋和半咸水环境。底栖有孔虫的存在很大程度上受物理因素（深度、温度、光量、水体扰动）、化学因素（盐度、溶解氧和可用元素）和生物因素（食物供给量和底层沉积物特征）的制约。研究人员对印度东、西岸现代底栖有孔虫生态学和分布状态进行了研究。Ｎａｉｄｕ等在对Ｖｉｓａｋｈａｐａｔｎａｍ港复合体有孔虫进行分析后提出 ,可以将有孔虫作为海洋污染的指示物。ＳｒｅｅｎｉｖａｓａＲａｏ等采用Ｑ模式系数分析对尼赞伯德讷姆湾有孔虫的分布进行了研究 ,确认此区域存在４种组合 ,受不同环境条件的影响。Ｋｈａｒｅ等对门格…     

Directional spread parameter at intermediate water depth

The characteristics of directional spread parameters at intermediate water depth are investigated based on a cosine power ‘2s' directional spreading model. This is based on wave measurements carried out using a Datawell directional waverider buoy in 23 m water depth. An empirical equation for the frequency dependent directional spreading parameter is presented. Directional spreading function estimated based on the Maximum Entropy Method is compared with those obtained using a cosine power ‘2s' parameter model. A set of empirical equations relating the directional spreading parameter corresponding to the peak of wave spectrum to other wave parameters like significant wave height and period are obtained. It shows that the wave directional spreading at peak wave frequency can be related to the non-linearity parameter, which allows estimation of directional spreading without reference to wind information.     

Interpolation of wave heights

Remote sensing of waves often necessitates presentation of data in the form of wave height values grouped over large time intervals. This restricts their use to long-term applications only. This paper describes how such data can be made suitable for short-term usage in the field. Weekly mean significant wave heights were derived from their monthly mean observations with the help of different alternative techniques. These include model-free neural network schemes as well as model-based statistical and numerical methods. Superiority of neural networks was noted when the estimations were compared with corresponding observations. The network was trained using three different training algorithms, viz., error back propagation, conjugate gradient and cascade correlation. The technique of cascade correlation took minimum training time and showed better coefficient of correlation between observations and network output.     

On the application of similitude to installation operations of offshore steel jackets

The role of similitude in scaled simulation of major installation operations of offshore steel jackets, namely, loadout, launching and upending has been studied. The physical modelling can be looked upon both as an adjunct to numerical modelling using computers and also as an independent tool of investigation. The problems of design of models and of experiments are discussed and the prediction equations based on similitude are given.     

Boundary Element Modeling of Multiconnected Ocean Basin in Visakhapatnam Port Under the Resonance Conditions

A mathematical model has been developed to analyze the influence of extreme water waves over multiconnected regions in Visakhapatnam Port, India by considering an average water depth in each multiconnected regions. In addition, partial reflection of incident waves on coastal boundary is also considered. The domain of interest is divided mainly into two regions, i.e., open sea region and harbor region namely as Region-I and Region-II, respectively. Further, Region-II is divided into multiple connected regions. The 2-D boundary element method (BEM) including the Chebyshev point discretization is utilized to solve the Helmholtz equation in each region separately to determine the wave amplification. The numerical convergence is performed to obtain the optimum numerical accuracy and the validation of the current numerical approach is also conducted by comparing the simulation results with existing studies. The four key spots based on the moored ship locations in Visakhapatnam Port are identified to perform the numerical simulation. The wave amplification at these locations is estimated for monochromatic incident waves, considering approximate water depth and different reflection coefficients on the wall of port under the resonance conditions. In addition, wave field analysis inside the Visakhapatnam Port is also conducted to understand resonance conditions. The current numerical model provides an efficient tool to analyze the amplification on any realistic ports or harbors.

     

Discrete time-delay control of an autonomous underwater vehicle: Theory and experimental results

A discrete time-delay control (DTDC) law for a general six degrees of freedom unsymmetric autonomous underwater vehicle (AUV) is presented. Hydrodynamic parameters like added mass coefficients and drag coefficients, which are generally uncertain, are not required by the controller. This control law cancels the uncertainties in the AUV dynamics by direct estimation of the uncertainties using time-delay estimation technique. The discrete-time version of the time-delay control does not require the derivative of the system state to be measured or estimated, which is required by the continuous-time version of the controller. This particularly provides an advantage over continuous-time controller in terms of computational effort or availability of sensors for measuring state derivatives, i.e., linear and angular accelerations. Implementation issues for practical realization of the controller are discussed. Experiments on a test-bed AUV were conducted in depth, pitch, and yaw degrees of freedom. Results show that the proposed control law performs well in the presence of uncertainties.     

Upper Ocean Four-Dimensional Variational Data Assimilation in the Arabian Sea and Bay of Bengal

A regional ocean circulation model with four-dimensional variational data assimilation scheme is configured to study the ocean state of the Indian Ocean region (65°E–95°E; 5°N–20°N) covering the Arabian Sea (AS) and Bay of Bengal (BoB). The state estimation setup uses 10 km horizontal resolution and 5 m vertical resolution in the upper ocean. The in-situ temperature and salinity, satellite-derived observations of sea surface height, and blended (in-situ and satellite-derived) observations of sea surface temperature alongwith their associated uncertainties are used for data assimilation with the regionally configured ocean model. The ocean state estimation is carried out for 61 days (1 June to 31 July 2013). The assimilated fields are closer to observations compared to other global state estimates. The mixed layer depth (MLD) of the region shows deepening during the period of assimilation with AS showing higher MLD compared to the BoB. An empirical forecast equation is derived for the prediction of MLD using the air–sea forcing variables as predictors. The surface and sub-surface (50 m) heat and salt budget tendencies of the region are also investigated. It is found that at the sub-surface, only the advection and diffusion temperature and salt tendencies are important.     

Impact of Satellite Altimetry on Simulations of Sea Level Variability by an Indian Ocean Model

This article describes the impact of satellite altimeter data on the simulations of sea level variability (SLV) by a nonlinear reduced gravity model of the entire Indian Ocean. The model has been forced by 6-hourly analyzed wind stress data containing SSM/I observations and has been able to produce realistic circulation features. However, SLV values observed by Topex/Poseidon altimeter do not fit these simulations because of imperfect initial data. Hence an attempt has been made to initialize the model using altimeter data. The initialized model-generated SLVvalues have been compared with SLV derived by altimeter for monsoon as well as nonmonsoon months of 1996. Experimental runs have been performed for 10 days, 20 days, and one month. It has been found that the initialized model results on the final day of these experiments are in very good agreement with altimeter data of the same day. It is thus possible, in principle, to hindcast and forecast sea level variations in the time scale of 10 days to one month with the availability of good quality wind data for forcing the model and altimeter observations of sea level for initializing it.