换道概率对交通系统动能的影响

基于跟车模型的特点,提出了跟车模型的动能变化公式,利用该公式研究换道概率对各车辆动能的影响.数值实验结果表明,换道概率和相对速度对各车辆动能产生较大影响,但换道概率和相对速度会分别降低其动能变化频率和幅度.此外,系统增加的平均动能会随着系统最大换道概率的增加而降低.     

Enhancing seismic P phase arrival picking based on wavelet denoising and kurtosis picker

P phase arrival picking of weak signals is still challenging in seismology. A wavelet denoising is proposed to enhance seismic P phase arrival picking, and the kurtosis picker is applied on the wavelet-denoised signal to identify P phase arrival. It has been called the WD-K picker. The WD-K picker, which is different from those traditional wavelet-based pickers on the basis of a single wavelet component or certain main wavelet components, takes full advantage of the reconstruction of main detail wavelet components and the approximate wavelet component. The proposed WD-K picker considers more wavelet components and presents a better P phase arrival feature. The WD-K picker has been evaluated on 500 micro-seismic signals recorded in the Chinese Yongshaba mine. The comparison between the WD-K pickings and manual pickings shows the good picking accuracy of the WD-K picker. Furthermore, the WD-K picking performance has been compared with the main detail wavelet component combining-based kurtosis (WDC-K) picker, the single wavelet component-based kurtosis (SW-K) picker, and certain main wavelet component-based maximum kurtosis (MMW-K) picker. The comparison has demonstrated that the WD-K picker has better picking accuracy than the other three-wavelet and kurtosis-based pickers, thus showing the enhanced ability of wavelet denoising.     

窑洞外形特征对结构抗震性能影响研究

调查发现山西北部农村地区农居窑洞多是独立式土坯窑洞,结构主要受力体系是土坯砌体砌筑拱结构,其建造无统一标准,外形样式存在差异。由于拱结构的内力分布对外形尺寸变化比较敏感,为研究窑洞外形特征对结构抗震性能影响,建立相应的有限元模型进行计算分析,对比不同外形特征窑洞在地震作用下的损伤情况,并结合历史震害,指出窑洞结构的薄弱位置。研究结果表明覆土较厚的窑洞容易损伤,连拱孔数较多窑洞的两侧位置更容易发生破坏,拱的曲线形状对结构抗震性能有一定影响,合理拱曲线窑洞的抗震性能优于一般形状窑洞。     

Calculating actual crop evapotranspiration under soil water stress conditions with appropriate numerical methods and time step

Calculation of actual crop evapotranspiration under soil water stress conditions is crucial for hydrological modeling and irrigation water management. Results of actual evapotranspiration depend on the estimation of water stress coefficient from soil water storage in the root zone, which varies with numerical methods and time step used. During soil water depletion periods without irrigation or precipitation, the actual crop evapotranspiration can be calculated by an analytical method and various numerical methods. We compared the results from several commonly used numerical methods, including the explicit, implicit and modified Euler methods, the midpoint method, and the Heun's third‐order method, with results of the analytical method as the bench mark. Results indicate that relative errors of actual crop evapotranspiration calculated with numerical methods in one time step are independent of the initial soil water storage in the range of soil water stress. Absolute values of relative error decrease with the order of numerical methods. They also decrease with the number of time step, which can ensure the numerical stability of successive simulation of soil water balance. Considering the calculation complexity and calculation errors caused by numerical approximation for different time step and maximum crop evapotranspiration, the explicit Euler method is recommended for the time step of 1 day (d) or 2 d for maximum crop evapotranspiration less than 5 mm/d, the midpoint method or the modified Euler method for the time step of up to one week or 10 d for maximum crop evapotranspiration less than 5 mm/d, and the Heun's third‐order method for the time step of up to 15 d. Copyright © 2011 John Wiley & Sons, Ltd.     

PRESENT STATUS OF EXPERIMENTAL STUDY ON HEAVY METAL POLLUTANT ADSORPTION－DESORPTION BY SEDIMENT IN CHINA

ＰＲＥＳＥＮＴＳＴＡＴＵＳＯＦＥＸＰＥＲＩＭＥＮＴＡＬＳＴＵＤＹＯＮＨＥＡＶＹＭＥＴＡＬＰＯＬＬＵＴＡＮＴＡＤＳＯＲＰＴＩＯＮ－ＤＥＳＯＲＰＴＩＯＮＢＹＳＥＤＩＭＥＮＴＩＮＣＨＩＮＡＨＵＡＮＧＳｕｉｌｉａｎｇａｎｄＷＡＮＺｈａｏｈｕｉ（Ｐｏｓｔｄｏｃ...     

智能CAD中图的一种表示方法

试图提出广义结点概念，并给出图的一种表示方法。该方法用邻接表法表示广义结点与邻近广义结点的关系，用向量表示法表示单一属性广义结点链。在实现方法上，不采用链接表结构，而用动态通用串结构很好地实现了图的运算操作。并举例说明在智能地ＣＡＤ中的运用。     

高美古与凤凰山水汽含量的统计分析

介绍了利用北京师范大学研制的ＩＲＡ－９３５型红外水汽测量仪对云南丽江高美古天文候选点及昆明凤凰山对比点上空垂直大气水汽积分含量Ｗ０的观测结果,给出了两地Ｗ０的日变化曲线及分布图,并对全年测量数据的统计结果作了分析和讨论     

位移时空综合分析法及其在边坡工程中的应用

以往对监测位移数据分析方法主要是位移-时间关系分析。但监测数据包含了大量对工程设计和施工都很有用的信息,其中不乏位移-空间方面的信息;另一方面,从工程设计和施工角度看,除需要位移-时间信息外,还需要位移-空间信息。位移时空综合分析法的提出旨在综合位移-时间和位移-空间等两方面的信息,为工程设计和施工服务。该方法依表现形式不同又分为竖线法和曲面法两种。本文将通过五强溪船闸边坡工程实例,来进一步说明位移时空综合分析法的原理及其应用。