Multiple windbreaks: An aeolean ensemble

Near-neutral measurements of the turbulent wind field within and above a sequence of 15 parallel windbreaks on a flat pastoral site are presented. The windbreak fences each had a porosity of 60% and were equally-spaced at 6 times their height (h = 2 m). The following conclusions seem justified for wind directions within 10 ° of the normal to the array:

1. Above the windbreaks (2h), mean windspeeds first decreased and then increased asymptotically to a value in equilibrium with the new surface roughness. At 0.5h, windspeeds exhibited a slow increase down the entire array.
2. Reflecting differences in approach flows, the drag on the initial fence was almost twice that on barriers farther downstream. This reduction in momentum extraction per windbreak was associated with an elevation in the zero-plane displacement to a level equal to 0.8h.
3. At positions well-removed from the initial fences, mean windspeeds were reduced throughout the entire region below shelter height. In this region, the flow became increasingly dominated by downward moving air with velocities much greater than the local average. The zone of reduced turbulence was small, extending only 2h downstream of a barrier at a height of 0.25h. This corresponded with the region excluded from smoke trails released at the top of windbreaks.
4. An approximate TKE budget mid-way between windbreaks 7 and 8 suggests that shear and wake production peak near z = h and that production is balanced by dissipation and vertical transport components. Advective and inertial interaction terms are negligible at this midway position but are likely to be major sources of TKE closer to the windbreak. Local equilibrium is attained above z = 1.5h implying the existence of a constant-stress layer.

The measurements show the practical difficulty of simultaneously reducing both mean windspeeds and turbulence levels with repeated windbreaks at conventional spacings for horticultural applications.     

Flow directions in ash-flow tuffs: a comparison of geological and magnetic susceptibility measurements, Tshirege member (upper Bandelier Tuff), Valles caldera, New Mexico, USA

This study concludes that the elongation axis (K ₁) of the ellipsoid of anisotropic magnetic susceptibility (AMS) is a suitable proxy for flow axis in ashflow tuffs. 153 oriented samples (176 specimens) were studied from 18 sites in the 1.1 Ma Tshirege member of the Bandelier Tuff. These sites are distributed around the Valles caldera at distances of 5–25 km outside of the rim.K ₁ axes correlate well with postulated radial flow axes at 13 sites.K ₁ also agrees with measured geological flow indicators, mainly imbricated larger clasts, at 7 sites. At 2 of the 5 sites where significant disagreement is seen between theoretical radial flow directions and measuredK ₁ axes, theK ₁ axes correspond well with geological flow indicators, indicating that the divergence of flow from the predicted radial flow pattern is real. Two major topographic buttresses are suggested as the cause of flow divergence for the Tshirege ash flows: the San Pedro buttress northwest of the caldera, and the San Miguel buttress in the southeast. In situK ₁ axes plunge about 7° toward the source at two-thirds of the sites; therefore the plunge ofK ₁ is a plausible in situ indicator for thedirection of flow. Multiple flow zones in sections of several meters thickness indicate changes of flow direction that are both rapid and large during ash-flow emplacement. These observations raisre the question of how best to represent mean flow directions in ash-flow sheets: by eigenvector methods, by vector-sum methods, or by modes. A method for measuring imbrication of larger clasts using apparent dips in vertical joints is outlined. Imbrication, determined in this way at one-third of the sites, dips toward the source, i.e., up-flow. The minimum (K ₃) axis of the AMS ellipsoid correlates with the flow foliation rather than with the larger clast imbrication. The flow axes of ash flows correspond with theK ₁ axes, not with the declination ofK ₃ axes as suggested by some authors. Initial dip of the sampled ash flows is not large and does not affect the paleomagnetic remanence direction, which is reversed with a mean ofD=173.5°,I=-38.4°, ₉₅=3.4°N=18. This mean is not different at the 95% confidence level from that of earlier workers. The mean pole, at 098.0°E, 74.8°N,A ₉₅=3.3°,N=18, is about 15° far-sided relative to the expected time-averaged geomagnetic pole, suggesting a history of emplacement too short to adequately average secular variation.     

Distribution and fluxes of metals in the St. Lawrence River from the outflow of Lake Ontario to Québec City

Six anchor stations in the St. Lawrence River from the outflow of Lake Ontario to Quebec City, were occupied for ca. 24 hours in June 1987 during low flow conditions. Samples of water and suspended particulate matter were separated by continuous-flow centrifugation, and were collected every two hours.During this sampling period, fluxes of dissolved forms of zinc, copper and nickel increased in Lac St. François and downstream relative to the sum of the fluxes for the two upstream stations at the outflow of Lake Ontario. Increases in the flux of dissolved zinc and copper were pronounced below Montreal and above Lac St. Pierre. For particulate forms of metals, all five metals show that there are significant inputs in the section of the St. Lawrence River between Lac St. François and the station just above the entrance to Lac St. Pierre.The average concentrations of dissolved cadmium, lead, zinc, copper and nickel ranged from 7–23 ng/l; 9–35 ng/l; 0.434–0.939 g/l; 0.15–0.89 g/l and 0.58–1.12 g/l respectively.Regression analysis of the dissolved and particulate metal concentrations suggests that the concentration of dissolved cadmium, lead, zinc and nickel can be predicted from the regression equation and the determination of particulate metal concentration. This prediction appears to be independent of the suspended particulate matter concentration which varies from ca. 1 to 10 mg/l from the outflow of Lake Ontario to Québec City.     

Magma sources for Mesozoic anorogenic granites of the White Mountain magma series,New England,USA

The magma sources for granitic intrusions related to the Mesozoic White Mountain magma series in northern New England, USA, are addressed relying principally upon Nd isotopes. Many of these anorogenic complexes lack significant volumes of exposed mafic lithologies and have been suspected of representing crustal melts. Sm–Nd and Rb–Sr isotope systematics are used to evaluate magma sources for 18 felsic plutons with ages ranging from about 120 to 230 Ma. The possibility of crustal sources is further examined with analyses of representative older crust including Paleozoic granitoids which serve as probes of the lower crust in the region. Multiple samples from two representative intrusions are used to address intrapluton initial isotopic heterogeneities and document significant yet restricted variations (<1 in _Nd). Overall, Mesozoic granite plutons range in _Nd [T] from +4.2 to -2.3, with most +2 to 0, and in initial ⁸⁷Sr/⁸⁶Sr from 0.7031 to 0.709. The isotopic variations are roughly inversely correlated but are not obviously related to geologic, geographic, or age differences. Older igneous and metamorphic crust of the region has much lower Nd isotope ratios with the most radiogenic Paleozoic granitoid at _Nd [180 Ma] of -2.8. These data suggest mid-Proterozoic separation of the crust in central northern New England. Moreover, the bulk of the Mesozoic granites cannot be explained as crustal melts but must have large mantle components. The ranges of Nd and Sr isotopes are attributed to incorporation of crust by magmas derived from midly depleted mantle sources. Crustal input may reflect either magma mixing of crustal and mantle melts or crustal assimilation which is the favored interpretation. The results indicate production of anorogenic granites from mantle-derived mafic magmas.     

High pressure experimental calibration of the olivine-orthopyroxene-spinel oxygen geobarometer: implications for the oxidation state of the upper mantle

Synthetic spinel harzburgite and lherzolite assemblages were equilibrated between 1040 and 1300° C and 0.3 to 2.7 GPa, under controlled oxygen fugacity (f _{O 2}). f _{O 2} was buffered with conventional and open double-capsule techniques, using the Fe−FeO, WC-WO₂-C, Ni−NiO, and Fe₃O₄−Fe₂O₃ buffers, and graphite, olivine, and PdAg alloys as sample containers. Experiments were carried out in a piston-cylinder apparatus under fluid-excess conditions. Within the P-T-X range of the experiments, the redox ratio Fe³⁺/ΣFe in spinel is a linear function of f _{O 2} (0.02 at IW, 0.1 at WCO, 0.25 at NNO, and 0.75 at MH). It is independent of temperature at given Δlog(f _{O 2}), but decreases slightly with increasing Cr content in spinel. The Fe³⁺/ΣFe ratio falls with increasing pressure at given Δlog(f _{O 2}), consistent with a pressure correction based on partial molar volume data. At a specific temperature, degree of melting and bulk composition, the Cr/(Cr+Al) ratio of a spinel rises with increasing f _{O 2}. A linear least-squares fit to the experimental data gives the semi-empirical oxygen barometer in terms of divergence from the fayalite-magnetite-quartz (FMQ) buffer:

Lead isotope and Pb-Pb model age determinations of ores from Central Europe and their metallogenetic interpretation

The paper presents lead isotope data from 211 samples from Phanerozoic lead-bearing ore occurrences in Central Europe, particularly from the Southern part of the former German Democratic Republic. The data are interpreted in terms of Amov's dynamic model of continuous lead isotope evolution. The relationships between thoro-genic and urano-genic model ages and the source of lead in different regional units are discussed. We observed differences in lead isotope evolution in the Hercynian internides and externides. Within the Moldanubian and Saxothuringian zones we distinguish five main lead-bearing ore associations: (1) Cambrian, stratiform base metal (Hermsdorf-Waldsassen; ²⁰⁶Pb/ ²⁰⁴Pb=17.50–17.70), (2) Devonian, vein type Sb-bearing, metamorphogene (neumühle-Hartmannsdorf; 17.80–18.00), (3) Upper Carboniferous-Permian, polymetallic, including tin, vein type (Kutna hora-Freiberg-Altenberg; 18.00–18.20), (4) Triassic (-Jurassic), Pb–Ba, vein type (Stibro-Halsbrücke; 18.20–18.60), (5) Cenozoic, polymetallic, vein type, riftogene (Roztoky-Banska tiavnica; 18.80–19.10). Pb isotope characteristics from ores of the Montagne Noire and the Brioude-Massiac district correspond to this subdivision. Ore associations from the Rheno-Hercynian zone display higher ²⁰⁷Pb/²⁰⁴Pb ratios which can be explained by more evolved and less metamorphosed source rocks. Mineralizations of the eastern Harz (Straßberg-Neudorf) belong to the Permian association, those from the western Harz (Clausthal-Bad Grund) to the Triassic-Jurassic. Because of Pb isotope agreement the stratabound Rammelsberg and the vein bound Ramsbeck-I mineralization are presumed to be isogenetic. Pb isotope identity of distinct mineralizations in the basement zone (Halsbrücke-Bad Grund) and in the Triassic sediments (Gorny Slask-Mechernich-Bleiglanzbänke) suggests a strong genetic coherence. Pb isotope conformity between the Upper Carboniferous-Permian-Triassic ore associations and Hercynian postkinematic granitoids, and lamprophyric rocks, also favours a close relationship. Pb isotope and other data indicate crustal sources. As the age of the ore associations decreases, crustal influences generally increase, apart from the Roztoky mineralization.     

Geochemical specialization of the tin-bearing granitoid massifs of NW Bohemia

The geochemistry of Hercynian tin-bearing granitoid massifs of the Krune hory Mts. (Erzgebirge), Slavkovský les Forest (Kaiserwald) and Smriny (eastern Fichtelgebirge) is compared by statistical processing of 270 analyses including a wide spectrum of major and trace elements. Seven different types of granites are distinguished. Out of these, five types represent the successive differentiation of the largest massif of NW Bohemia: the Karlovy Vary (Karlsbad) massif. This comprises strongly differentiated peraluminous granites evolving towards extreme Li-Rb-Cs-F-and Sn-enrichment in the youngest members, which are albite-topaz-zinwaldite lithium granites. The sixth and seventh types are different from the former by their location in the eastern Krune hory and tectonic setting, and they display geochemical features of anorogenic granites: they are metaluminous albite-zinwaldite granites with marked enrichment of Nb, Y, and HREE in addition to Li, Rb, Cs, F and Sn, indicating contamination by sub-crustal material. Sn-W mineralizations, including flat peri-contact greisen bodies, steep greisen veins and tourmalinized phyllites, are all intimately associated with the most strongly differentiated granites — the Li-granite and the Cinovec-granite respectively.     

The effect of bulk rock composition on the stability of amphibole in the upper mantle: Implications for solidus positions and mantle metasomatism

Summary The stability of pargasitic amphibole in the upper mantle is a function of water content and bulk rock composition, and under water-undersaturated conditions, the stability of amphibole controls the solidus position. Experiments in the system Tinaquillo peridotite +0.2% H₂O, a refractory peridotite under water-undersaturated conditions, show that amphibole is stable to 1030°C and 26 kb. In contrast, pargasitic amphibole is stable to 1150°C and 30 kb in Hawaiian pyrolite, a more fertile peridotite composition. This indicates that under water-undersaturated conditions, the most fertile part of a crystallizing mantle diapir with an inhomogeneous composition will solidify first while a more refractory component will contain an alkali-rich melt which will have the ability to metasomatize adjacent regions. The relative stabilities of amphibole in refractory and fertile bulk compositions may result in increasing rather than diminishing chemical contrasts in high temperature lherzolite, i.e. a process of metamorphic differentiation. Ti, Fe, Al and Na metasomatism can therefore be considered a normal occurrence associated with the upward migration and solidification of an H₂O-bearing mantle diapir.

---

Der Einfluß der Gesamtgesteins-Zusammensetzung auf die Stabilität von Amphibol im oberen Mantel: Bedeutung für Solidus-Positionen und Mantel-Metasomatose

Zusammenfassung Die Stabilität pargasitischer Amphibole im oberen Mantel ist eine Funktion von Wassergehalt und Gesamtgesteins-Zusammensetzung. Unter wasser-untersättigten Bedingungen, kontrolliert die Stabilität von Amphibol die Solidus-Position. Experimente in dem System Tinaquillo Peridotit +0,2% H₂O, einem refraktären Peridotit unter wasser-untersättigten Bedingungen, zeigen daß Amphibol bis 1030°C und 26 Kb stabil ist. Im Gegensatz dazu ist pargasitische Hornblende in einem Hawaii-Pyrolit, von mehr fertiler Peridotit-Zuammensetzung, bis 1150°C und 30 Kb stabil. Das zeigt, daß bei wasser-untersättigten Bedingungen der am meisten produktive Teil eines kristallisierenden Mantel-Diapirs mit inhomogener Zusammensetzung sich zuerst verfestigen wird, während eine mehr refraktäre Komponente eine alkali-reiche Schmelze enthalten wird, die wiederum die Fähigkeit hat, umliegende Bereiche metasomatisch zu beeinflussen. Die relativen Stabilitäten von Amphibol in refraktären und fertilen Gesamtzusammensetzungen können dazu führen, daß die chemischen Gegensätze in Hochtemperaturlherzoliten eher zunehmen als abnehmen, d. h. ein Prozeß metamorpher Differentiation. Ti, Fe, Al und Na Metasomatose können deshalb als ein verbreiteter Vorgang, der mit der Aufwärtsbewegung und Verfestigung eines H₂O-führenden Mantel-Diapirs assoziiert ist, betrachtet werden.

---

---

With 4 Figures     

Commission health and development

IGU-Reports

Commission health and development