Influence of atmospheric dust on non-telescopic sunspot observations

Catalogues of non-telescopic sunspot observations from the Orient have been presented by several authors. Since atmospheric dust facilitates naked-eye observation of the Sun we investigate its possible influence by comparing the historical records of sunspot sightings and atmospheric dust storms. A distinction is made between the record up to the end of the Ming dynasty that is based on court documents and the post-Ming reports that are all provincial sightings. The earlier record is found to be significantly anti-correlated with C-14 fluctuations while the latter one is weakly anti-correlated. The provincial sightings contain a much larger signature of atmospheric turbidity, as is also indicated by their poor comparison with telescopic data.     

Heavy metal contamination in surface sediments of Gökçekaya Dam Lake,Eskişehir,Turkey

The present study to find seasonal (September 2010–June 2011) heavy metal (Cd, Pb, Cr, Co, Ni, Zn, Cu, Fe, As) contamination and the origins thereof in surface sediments of Gökçekaya Dam Lake, as constructed on Sakarya River, the third-longest river in Turkey and the largest river of the Northwestern Anatolia. Upon analyses for the purpose thereof, heavy metal contamination in annual average concentrations in the lake sediment varied, respectively, as Fe > Zn > Cr > Ni > Cu > Pb > Co > As > Cd. Statistical assessments performed in order to see whether the average values of the heavy metal contamination as measured at stations placed in the lake changed by seasonal periods. There found statistically significant differences especially in Cd, Zn, and Pb between seasonal periods. In accordance with the Sediment Quality Index, Gökçekaya Dam Lake sediment was classified as “highly polluted” in terms of the amount of anthropogenic contaminants of As, Cr, Cu, Ni, Pb, and Zn. Enrichment factor and geoaccumulation index values (I _geo) were calculated in order to geochemically interpret the source of contamination due to heavy metal concentration in the lake sediment and the level of pollution. The As, Co, Cr, Cu, Ni Pb, and Zn values demonstrated that the sediment was rich for anthropogenic contaminants. The lake was found especially rich for arsenic (14.97–34.70 mg/kg) and lead (68.75–98.65 mg/kg) in accordance with annual average values. In general the lake was geochemically characterized as “moderately contaminated” in terms of As, Co, Cr, Cu, Ni, Pb, and Zn content.     

Image data fusion for the remote sensing of freshwater environments

Remote sensing based mapping of diverse and heterogeneous freshwater environments requires high-resolution images. Data fusion is a useful technique for producing a high-resolution multispectral image from the merging of a high-resolution panchromatic image with a low-resolution multispectral image. Given the increasing availability of images from different satellite sensors that have different spectral and spatial resolutions, data fusion techniques that combine the strengths of different images will be increasingly important to Geography for land-cover mapping. Different data fusion methods however, add spectral and spatial distortions to the resultant data depending on the geographical context; therefore a careful selection of the fusion method is required. This paper compares a technique called subtractive resolution merge, which has not previously been formally tested, with conventional techniques such as Brovey transformation, principal component substitution, local mean and variance matching, and optimised high pass filter addition. Data fusion techniques are grouped into spectral and spatial centric methods. Subtractive resolution merge belongs to a new class of data fusion techniques that uses a mix of both spatial and spectral centric approaches. The different data fusion techniques were applied to a QuickBird image of a semi-aquatic freshwater environment in New Zealand. The results were compared both qualitatively and quantitatively using spectral and spatial error metrics. This research concludes that subtractive resolution merge performed better than all the other techniques and will be a valuable technique for enhancing images for freshwater land-cover mapping.     

Emission quantification of refrigerant CFCs,HCFCs and HFCs in megacity Lahore (Pakistan) and contributed ODPs and GWPs

An integrated assessment of emissions of some important refrigerant ozone depleting substances (ODSs) (CFC-11, CFC-12, HCFC-141b and HFC-134a) and their contributed ozone depletion potentials (ODPs) and global warming potentials (GWPs) have been made in the megacity Lahore (Pakistan) for the period from 2005 to 2013. During the production of 6.488 million refrigerator units, the cumulative estimated emissions of CFC-11, CFC-12, HCFC-141b and HFC-134a were 129.7, 6.8, 1257 and 104 mega grams (1 Mg = 10⁶ grams). The estimated GWP (CO₂-eq) and ODP (CFC 11-eq) associated with production phase emissions of these four gases were 616.07, 73.52, 910.96, and 87.36 kilotonnes, and 129.7, 6.8, 139.4, and 0 tonnes, respectively. ODP of HFC-134a is considered to be zero. In addition, the repair and maintenance of 81.2 thousand units resulted in 10.8 Mg emissions of CFC-12 with 10.8 tonnes ODP(CFC 11-eq) and 117,802 tonnes GWP (CO₂-eq) that were higher than the HFC-134a emissions recorded at 4.3 Mg causing 4563 tonnes GWP(CO₂-eq). A decrease in ODP (CFC 11-eq) and GWP (CO₂-eq) at the rate of ?8.3% and ?8.2% per year is observed to be contributed by all the selected ODSs during the study period.     

Satellite and ground-based remote sensing of aerosols during intense haze event of October 2013 over lahore,Pakistan

Due to increase in population and economic development, the mega-cities are facing increased haze events which are causing important effects on the regional environment and climate. In order to understand these effects, we require an in-depth knowledge of optical and physical properties of aerosols in intense haze conditions. In this paper an effort has been made to analyze the microphysical and optical properties of aerosols during intense haze event over mega-city of Lahore by using remote sensing data obtained from satellites (Terra/Aqua Moderate-resolution Imaging Spectroradiometer (MODIS) and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO)) and ground based instrument (AErosol RObotic NETwork (AERONET)) during 6-14 October 2013. The instantaneous highest value of Aerosol Optical Depth (AOD) is observed to be 3.70 on 9 October 2013 followed by 3.12 on 8 October 2013. The primary cause of such high values is large scale crop residue burning and urban-industrial emissions in the study region. AERONET observations show daily mean AOD of 2.36 which is eight times higher than the observed values on normal day. The observed fine mode volume concentration is more than 1.5 times greater than the coarse mode volume concentration on the high aerosol burden day. We also find high values (~0.95) of Single Scattering Albedo (SSA) on 9 October 2013. Scatter-plot between AOD (500 nm) and Angstrom exponent (440-870 nm) reveals that biomass burning/urban-industrial aerosols are the dominant aerosol type on the heavy aerosol loading day over Lahore. MODIS fire activity image suggests that the areas in the southeast of Lahore across the border with India are dominated by biomass burning activities. A Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model backward trajectory showed that the winds at 1000 m above the ground are responsible for transport from southeast region of biomass burning to Lahore. CALIPSO derived sub-types of aerosols with vertical profile taken on 10 October 2013 segregates the wide spread aerosol burden as smoke, polluted continental and dust aerosols.     

Sensitivity of secular trends in precipitation data to observational errors

There has been considerable interest in estimating secular trends in precipitation data in various regions of the world. It is therefore important to ascertain the manner in which errors of observation affect estimated trends. For this purpose we have compared trends at 1219 stations in the contiguous United States for two data sets: (a) original observations, also called raw observations, and (b) the observations, adjusted to compensate for suspected errors. The adjustments were made at the National Climate Data Center, Asheville (Quinlan et al., 1987;karl andWilliams, 1987), In order to focus on the effects of observational errors we attempted to avoid the effects of filling of missing data by limiting the analysis to the period 1940–1984 for which the number of missing values is much smaller than earlier periods. A least-square linear regression was performed on the raw and adjusted data for each station and the slopes of the fitted lines were compared. The comparison was made for monthly, seasonal and annual precipitation values.The results for annual precipitation showed that 23 percent of the stations have trends of opposite signs in the raw and adjusted data. The trends were identical in annual data at only 11 percent of the stations. When monthly data are combined to form seasonal and annual averages the magnitude of the difference between the slopes of the adjusted and the raw observations generally increases, indicating that the errors in the individual monthly observations are correlated. When the station data were averaged to obtain state-wide averages, the effects of the errors became less pronounced in most of the states. These results indicate that obtaining trends in precipitation from station data is a more difficult problem than has been realized.     

Management of Mediterranean coastal dunes

This paper gives some theoretical concepts of dune management as well as practical examples of how actual measures should be carried out.Dune management is defined as all measures aimed at the preservation and restoration of the natural values of a coastal sand dune area. It is essential that beach and foreshore are seen as parts of a whole dune system. Management must take into account all processes within this system. It should aim at nature conservation and wise use of coastal resources and all forms of land use should be ecologically sustainable. Dune management should work as much as possible ‘with’ the natural processes and not ‘against’ them.Four types of Mediterranean dune systems (including Portugal and SW Spain) are distinguished:: mainland dunes, lagoon-bay barrier dunes, delta dunes and remnant dunes.Like in most parts of the world, Mediterranean dunes fulfill several functions at the same time. The following functions will be dealt with: nature management, coastal defence and erosion, dune stabilisation and afforestation, agriculture, tourism and urbanisation, recreation, golf, information and education. The concepts of management which are considered include: sustainable use, large and coherent units, compensation, management planning, environmental impact assessment and function analysis.Dune stabilisation is not always considered necessary. In case of stabilisation by planting, only indigenous species should be used, preferably pioneers and not trees. Planting of exotic species should be avoided.     

Determination of groundwater potential by using geoelectrical method and petrographic analysis in Rawalakot and adjacent areas of Azad Kashmir,sub-Himalayas,Pakistan

The current study is carried out for the determination of groundwater potential in District Rawalakot Azad Jammu and Kashmir (AJ&K) Pakistan by using electrical resistivity method and petrographic analysis of the area. The tape-compass-clinometers method was used in section measurement to understand the facies and depositional environment. The electrical resistivity survey was carried out in the project area in sub-Himalayan Siwaliks system of Pakistan to overcome water scarcity in a few regions. The area was chartered with the Schlumberger configuration up to the AB/2 depth of 150 m. The ABEM Terrameter SAS 4000 (Sweden) and accessories were used to acquire vertical electrical soundings in 24 locations. The results obtained through the 2D and 3D isoresistivity maps of apparent resistivity for 15, 45, and 130 m spacings, the 3D isoresistivity maps of transverse resistance and anisotropy, the VES curve types, and the measured stratigraphic section of surface rocks revealed the confined or semi-confined type aquifers within sedimentary formations. The petrographic analysis indicates the clues of the secondary porosity and fluid migrations through the rocks.     

Geochemistry and Mineralogy of Paleocene Coal from the Padhrar and Darra Adam Khel Coalfields of Pakistan

Pakistan is rich in coal resources, which amount to around 186 billion tons. The Paleocene Padhrar and Darra Adam Khel coalfields are located in the Central Salt Range Punjab Province and the Khyber Pakhtunkhwa Province, Pakistan, respectively. Padhrar coal has not been studied in detail and the Darra Adam Khel coalfields are newly-discovered, so no research has been done, due to security considerations. In this study, an attempt has been made to study the geochemical and mineralogical characteristics of the Padhrar and Darra Adam Khel coals, in order to learn about the coal quality, element enrichment mechanism, sedimentary medium conditions and potentially valuable elements for coal utilization. The Padhrar and Darra Adam Khel coals are low to medium ash, low moisture content, high in volatiles and high total sulfur coal. The vitrinite reflectance in Darra Adam Khel coal is higher than in Padhrar coal, indicating either a greater burial depth or the effects of Himalayan tectonism. The vitrinite content is dominant in the Padhrar and Darra Adam Khel coals, followed by inertinite and liptinite, the major minerals including quartz, clay minerals, calcite and pyrite. The trace elements Ni, As, Be Zn, Ge, Mo, Ta, W, Co and Nb, Sn, Hf, Ta, Pb, Th, Cd, In, Be, V, Cr, Zr, Ag, Li, W and Co are concentrated in some of the Padhrar and Darra Adam Khel coal samples, respectively. The Padhrar coal shows positive Ce, Eu and Gd anomalies, with most of the Darra Adam Khel coal showing negative Ce, Eu and positive Gd anomalies with high LREE. The Al2O3/TiO2 values indicate that the sediment source of the Padhrar and Darra Adam Khel coals is mostly related to intermediate igneous rocks. The Sr/Ba, SiO2 + Al2O3, Fe2O3 + CaO + MgO/SiO2 + Al2O3 and high sulfur content in the Padhrar and Darra Adam Khel coals indicate epithermal and marine water influence with a tidal flat, coal-forming environment and a deltaic coal-forming environment, respectively.     

Dissolution and Deformation Characteristics of Limestones Containing Different Calcite and Dolomite Content Induced by CO2-Water-Rock Interaction

To investigate the impacts of mineral composition on physical and mechanical properties of carbonate rocks, limestone specimens containing different contents in calcite and dolomite are selected to perform CO2-water-rock reaction experiments. The X-ray Diffraction (XRD) and Nuclear Magnetic Resonance (NMR) are carried out to examine the change characteristics of mineral dissolution and pore structure after reaction. The core flooding experiments with Fiber Bragg gratings are implemented to examine the stress sensitivity of carbonate rocks. The results show that the limestones containing pure calcite are more susceptible to acid dissolution compared to limestone containing impure dolomite. The calcite content in pure limestone decreases as the reaction undergoes. The dissolution of dolomite leads to the formation of calcite in impure limestone. Calcite dissolution leads to the formation of macropore and flow channels in pure limestone, while the effects of impure dolomite in impure limestone results in mesopore formation. When confining pressure is lower than 12 MPa, pure limestones demonstrate higher strain sensitivity coefficients compared to impure limestone containing dolomite after reaction. When confining pressure exceeds 12 MPa, the strain sensitivity coefficients of both pure and impure limestones become almost equal.