Stable isotope characteristics of precipitation of Pamba River basin,Kerala, India

Stable isotope composition of precipitation from Pamba River basin, Kerala, India, is evaluated to understand the role of spatial and temporal variations on rainwater isotope characteristics. Physiographically different locations in the basin showed strong spatial and temporal variations. δ ¹⁸O varied from ?7.63 to ?1.75 ‰ in the lowlands; from ?9.32 to ?1.94 ‰ in the midlands and from ?11.6 to ?4.00 ‰ in the highlands. Local Meteoric Water Lines (LMWL) for the three regions were determined separately and an overall LMWL for the whole of the basin was found to be δ ²H = 6.6 (±0.4) δ ¹⁸ O+10.4 (±2.0). Altitude effect was evident for the basin (0.1 ‰ for δ ¹⁸O and 0.8 ‰ for δ ²H per 100 m elevation), while the amount effect was weak. The precipitation formed from the marine moisture supplied at a steady rate, without much isotopic evolution in this period may have masked the possible depletion of heavier isotopes with increasing rainfall. Consistently high d-excess values showed the influence of recycled vapour, despite the prevailing high relative humidity. The oceanic and continental vapour source origins for the south-west and north-east monsoons were clearly noted in the precipitation in the basin. Rayleigh distillation model showed about 30% rainout of the monsoon vapour mass in the basin.     

Helical Eruptive Prominence Associated with a Pair of Overlapping CMEs on 21 April 2001

The eruption of limb prominence on 21 April 2001 associated with two coronal mass ejections (CMEs) is investigated. Hα images reveal two large-scale eruptions (a prominence body and a southern foot-point arch), both showing helical internal structure. These two eruptions are found to be spatially and temporally associated with the corresponding CMEs. The kinematics and the study of geometrical parameters of the prominence show that the eruption was quite impulsive (with peak acceleration ≈470 m s⁻²) and has taken place for relatively low pitch angle of helical threads, not exceeding tan θ≈1.2. The stability criteria of the prominence are revisited in the light of the model of Vršnak (1990, Solar Phys. 129, 295) and the analysis shows that the eruption violates the instability criteria of that model. Finally, the energy stored in the prominence circuit and the energies (kinetic, potential, and magnetic) of the associated CMEs are estimated and it is found that there was enough energy stored in the prominence to drive the two CMEs. S.S. Ali is on leave from Aligarh Muslim University, Aligarh, 202 002, India.     

Study of a large helical eruptive prominence associated with double CME on 21 April 2001

Here we present a preliminary analysis of a helical eruptive prominence at the east limb of the Sun on 21 April 2001. Unusually this eruption is associated with a double CME. We have tried to study the morphology of the event, energy budget of the prominence and associated CMEs. Our analysis shows that the prominence and first CME started simultaneously from the limb and prominence carries sufficient energy to feed both the CMEs. Moreover, it is also concluded that CMEs are magnetically driven and internally powered.     

A study on the factors affecting the stable isotopic composition in precipitation of Tamil Nadu,India

Stable isotope measurements in precipitation help us to form the basic inference about the origin and the state of water in different environments. The precipitation samples collected during the South West Monsoon (SWM) during August 2007 from 37 different locations in the state help in deriving the first preliminary local meteoric water line (LMWL) for the Tamil Nadu State. The study reveals that there are three main sources of water vapours, namely South East Arabian Sea (SEAS), Indian Ocean (IO) and evaporation from local water bodies. There are wide variations in the altitude and amount of rainfall received in the state. It is also noted that there is a significant variation in the latitude and the distance from the coast. Hence, an attempt is made in this paper to study the factors controlling the composition of stable isotopes in precipitation with reference to amount of rainfall, latitude, altitude and the continental effect. The altitude and continental effect shows good correlation to the variations in stable isotope composition. Copyright © 2009 John Wiley & Sons, Ltd.     

Tsunami Inundation Modelling for the Coast of Kerala,India

The disastrous tsunami of December 26, 2004, exposed the urgent need for implementing a tsunami warning system. One of the essential requirements of a tsunami warning system is the set up of tsunami inundation models which can predict inundation and run-up along a coastline for a given set of seismic parameters. The Tsunami Warning Centre and the State/District level Disaster Management Centres should have tsunami inundations maps for different scenarios of tsunami generation. In the event of a tsunamigenic earthquake, appropriate decisions on issue of warnings and/or evacuation of coastal population are made by referring to such maps. The nature of tsunami inundation and run-up along the Kerala coast for the 2004 Sumatra and 1945 Makran, and a hypothetical worst-case scenario are simulated using the TUNAMI N2 model and the results are presented in this paper. Further, scenarios of tsunami inundation arising out of possible rise in sea level as projected by the Intergovernmental Panel on Climate Change (IPCC 2001) are also simulated and analysed in the paper. For the study, three representative sectors of the Kerala coast including the Neendakara-Kayamkulam coast, which was the worst hit by the 2004 tsunami, are chosen. The results show that the southern locations and certain locations of central Kerala coast are more vulnerable for Sumatra when compared to Makran 1945 tsunami. From the results of numerical modelling for future scenarios it can be concluded that sea level rise can definitely make pronounced increase in inundation in some of the stretches where the backshore elevation is comparatively low.     

Integrated mass balance of some heavy metals fluxes in Yaakob village,south Sohag,Egypt

The pollution of soil with heavy metals has direct or indirect adverse effect on human health. The present work was conducted to identify all the expected sources and sinks for heavy metals by applying mass balance model to identify the retention rate of metals by soils in Yaakob village, south Sohag Governorate, Egypt. The studied inputs (sources) include P-fertilizers, irrigation water and dustfall, while the main outputs (sinks) are drainage water and harvested plants. The measurements indicate that soil, clover, dustfall and P-fertilizers contain considerable concentration of Cd, Cr, Co, Cu and Pb. The mass balance measurements indicate that the accumulation rate of Cd, Cr and Co in soil was 5.4, 54.6 and 16.3 g ha^?1 year^?1, respectively. However, depletion trend of Pb and Cu was about 1.4 and 5.2 g ha^?1 year^?1, respectively. The main source of Cd, Pb, Cr and Co in the study area is P-fertilizers with input flux 14.9, 89.9, 198.6 and 18.5 g ha^?1 year^?1, while Cu source was dustfall with 19.33 g ha^?1 year^?1. The index of geoaccumulation calculations indicates different degrees of contamination with Cd, Cr, Co and Cu. On the other hand, the main sink for the studied heavy metals was the Egyptian clover (Trifolium alexandrinum) which can be considered a good bioaccumulator of heavy metals.     

Siting MSW landfills with a weighted linear combination methodology in a GIS environment

Landfill has been taken to the bottom of the hierarchy of options for waste disposal but has been the most used method for urban solid waste disposal. However, landfill has become more difficult to implement because of its increasing cost, community opposition, and more restrictive regulations regarding the siting and operation of landfills. Land is a finite and scarce resource that needs to be used wisely. Appropriate allocation of landfills involves the selection of areas that are suitable for waste disposal. The present work describes a type of multi-criteria evaluation (MCE) method called weighted linear combination (WLC) in a GIS environment to evaluate the suitability of the study region for landfill. The WLC procedure is characterized by full tradeoff among all factors, average risk and offers much flexibility than the Boolean approaches in the decision making process. The relative importance weights of factors are estimated using the analytical hierarchy process (AHP). In the final aggregated suitability image, zones smaller than 20 hectares are eliminated from the allocation process. Afterwards, the land suitability of a zone is determined by calculating the average of the suitability of the cells belonging to that zone, a process called zonal land suitability. The application of the presented method to the Gorgan city (Iran) indicated that there are 18 zones for landfill with their zonal land suitability varying from 155.426117 to 64.149024. The zones were ranked in descending order by the value of their zonal land suitability. The results showed the use of GIS as a decision support system (DSS) available to policy makers and decision makers in municipal solid waste (MSW) management issues.     

Application of gravity and magnetic methods for the crustal study and delineating associated ores in the western limb of Hazara Kashmir Syntaxis,Northwest Himalayas,Pakistan

The present geophysical study deals with the ores and crustal demonstration of southeastern Hazara and its adjoining areas of Azad Jammu and Kashmir, Pakistan, on the basis of terrestrial gravity and magnetic data. Tectonically, the study area lies in the Lesser Himalayas as well as to an extent in the sub-Himalaya, more specifically in the western limb of Hazara Kashmir Syntaxis. In this study, 567 gravity and 508 magnetic stations have been measured with CG-5 gravimeter and proton precession magnetometer, respectively. The collected data have been processed by applying standard corrections and then different types of maps were prepared. The ores in the area have been delineated by the qualitative interpretation of residual Bouguer anomaly and reduction to pole total magnetic intensity maps, whereas regional structures are demarcated by the Bouguer anomaly and regional Bouguer anomaly maps. The positive contour closures on the residual Bouguer anomaly map indicate the iron ore and phosphate, whereas negative contour closures are the effects of low-density material which consists of gypsum and soapstone. The pole-reduced total intensity map also shows the negative and positive contour closures almost in the same localities and confirms the residual Bouguer anomaly map. The geological model computed on the basis of Bouguer anomaly demarcated a series of faults between different rock units in the study area. The Kashmir Boundary Thrust cuts the western limb of Hazara Kashmir Syntaxis near the apex in the north of Muzaffarabad and marks the boundary between Murree Formation and carbonates of Abbottabad Formation. The gravity model also suggests that the thickness of the crust increases towards the northeast.