Relationships among water column toxins,cell abundance and chlorophyll concentrations during Karenia brevis blooms

The assumptions that Karenia brevis cell abundance and brevetoxin concentrations are proportional and that cell abundance and chlorophyll are related were tested in a 3-year field study off the west coast of Florida. The relationship between K. brevis cell abundance and brevetoxins (PbTx-2+PbTx-3) in whole water samples was strong (R²=0.92). There was no significant difference between the brevetoxin concentrations in whole water and the >0.7 μm particulate fraction. Only 7% of the total brevetoxin concentration was measured in the <0.7 μm (cell free) filtrate. The relationship of K. brevis cell abundance >5000 cells L⁻¹ with chlorophyll for all cruises and at all depths was robust (R²=0.78). These data substantiate the use of chlorophyll as a proxy for K. brevis cell abundance and K. brevis cell abundance as a proxy for brevetoxins during blooms. The ratios of the brevetoxins, PbTx-2:PbTx-3, was significantly higher in surface water than in bottom water. This information in conjunction with K. brevis growth rates may provide a useful indicator for determining the physiological state of the bloom over time.     

Non-destructive assessment of polycyclic aromatic hydrocarbon (PAH) exposure by fluorimetric analysis of crab urine

The detection of urinary polycyclic aromatic hydrocarbon (PAH) metabolites by fluorescence spectrophotometry is particularly effective as a practical means to assess PAH exposure in decapod crabs. However, the practical application of this technique has thus far only been tested for the European shore crab (Carcinus maenas) and only a few field studies have been conducted in heavily polluted areas. The present study evaluated the adaptability of this method as a rapid, cost-effective and non-destructive biomonitoring tool for the New Zealand crab species, Macrophthalmus hirtipes (stalk-eyed mud crab). A field gradient could be detected among the sites and different input sources of PAH contamination could be discerned through the differentiation of pyrogenic and petrogenic PAH signatures. The present study shows that the fluorescence screening method is sensitive to relatively low levels of PAH contamination and more broadly applicable to smaller crab species than C. maenas, for which the technique was developed.     

Multitemporal terrestrial laser scanning point clouds for thaw subsidence observation at Arctic permafrost monitoring sites

This paper investigates different methods for quantifying thaw subsidence using terrestrial laser scanning (TLS) point clouds. Thaw subsidence is a slow (millimetre to centimetre per year) vertical displacement of the ground surface common in ice-rich permafrost-underlain landscapes. It is difficult to quantify thaw subsidence in tundra areas as they often lack stable reference frames. Also, there is no solid ground surface to serve as a basis for elevation measurements, due to a continuous moss–lichen cover. We investigate how an expert-driven method improves the accuracy of benchmark measurements at discrete locations within two sites using multitemporal TLS data of a 1-year period. Our method aggregates multiple experts’ determination of the ground surface in 3D point clouds, collected in a web-based tool. We then compare this to the performance of a fully automated ground surface determination method. Lastly, we quantify ground surface displacement by directly computing multitemporal point cloud distances, thereby extending thaw subsidence observation to an area-based assessment. Using the expert-driven quantification as reference, we validate the other methods, including in-situ benchmark measurements from a conventional field survey. This study demonstrates that quantifying the ground surface using 3D point clouds is more accurate than the field survey method. The expert-driven method achieves an accuracy of 0.1 ± 0.1 cm. Compared to this, in-situ benchmark measurements by single surveyors yield an accuracy of 0.4 ± 1.5 cm. This difference between the two methods is important, considering an observed displacement of 1.4 cm at the sites. Thaw subsidence quantification with the fully automatic benchmark-based method achieves an accuracy of 0.2 ± 0.5 cm and direct point cloud distance computation an accuracy of 0.2 ± 0.9 cm. The range in accuracy is largely influenced by properties of vegetation structure at locations within the sites. The developed methods enable a link of automated quantification and expert judgement for transparent long-term monitoring of permafrost subsidence. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Influence of volcanic glass on the magnetic signal of different paleosols in Córdoba,Argentina

This contribution comprises geological and magnetic results obtained in loess and paleosols profiles outcropped in the Pampean plain (Argentina). The sedimentary sequence exposed in Córdoba province is represented by four profiles Corralito I, Corralito II, Monte Ral815o and Lozada, 32°S 64°14'W (Argentina). These profiles were mineralogically described and magnetically analyzed. The sediments that compound the profiles contain volcanic glass between 20 and 90%. The results of two paleosols with different percentage of volcanic glass in the parent material (correlated to Marine Isotope Stage 5, MIS 5) exposed at Corralito I and Lozada, were compared; an important relationship between environmental magnetism signal and volcanic glass content was observed. All the results suggest that there are variations between different paleosols of the same area and age; such variations are attributed to content of volcanic glass in parent material; time of exposure of the parent material to pedogenic processes; and geomorphological place of each profile. At present, it is not possible to quantify certainly the paleo-precipitation index. Only qualitative interpretation can be done taking into account many variables of the geological system.     

Mechanisms of ringwoodite formation in shocked meteorites: Evidence from L5 chondrite Dhofar 1970

The formation of the high‐pressure compositional equivalents of olivine and pyroxene has been well‐documented within and surrounding shock‐induced veins in chondritic meteorites, formed by crystallization from a liquid‐ or solid‐state phase transformation. Typically polycrystalline ringwoodite grains have a narrow range of compositions that overlap with those of their olivine precursors, whereas the formation of iron‐enriched ringwoodite has been documented from only a handful of meteorites. Here, we report backscattered electron images, quantitative wavelength‐dispersive spectrometry (WDS) analyses, qualitative WDS elemental X‐ray maps, and micro‐Raman spectra that reveal the presence of Fe‐rich ringwoodite (Fa_44‐63) as fine‐grained (500 nm), polycrystalline rims on olivine (Fa_24‐25) wall rock and as clasts engulfed by shock melt in a previously unstudied L5 chondrite, Dhofar 1970. Crystallization of majorite + magnesiowüstite in the vein interior and metastable mineral assemblages within 35 μm of the vein margin attest to rapid crystallization of a superheated shock melt (>2300 K) from 20─25 GPa to ambient pressure and temperature. The texture and composition of bright polycrystalline ringwoodite rims (Fa_44‐63; MnO 0.01─0.08 wt%) surrounding dark polycrystalline olivine (Fa_8‐14; MnO 0.56─0.65 wt%) implies a solid‐state transformation mechanism in which Fe was preferentially partitioned to ringwoodite. The spatial association between ringwoodite and shock melt suggests that the rapidly fluctuating thermal regimes experienced by chondritic minerals in contact with shock melt are necessary to both drive phase transformation but also to prevent back‐transformation.     

The effect of iron on montmorillonite stability. (II) Experimental investigation

Several designs proposed for high-level nuclear waste (HLW) repositories include steel waste canisters surrounded by montmorillonite clay. This work investigates montmorillonite stability in the presence of native Fe, magnetite and aqueous solutions under hydrothermal conditions. Two series of experiments were conducted. In the first, mixtures of Na-montmorillonite, magnetite, native Fe, calcite, and NaCl solutions were reacted at 250 °C, P_sat for between 93 and 114 days. In the second series, the starting mixtures included Na-montmorillonite, native Fe and solutions of FeCl₂ which were reacted at temperatures of 80, 150, and 250 °C, P_sat, for 90-92 days. Experiments were analysed using XRD, FT-IR, TEM, ICP-AES, and ICP-MS. In the first series of experiments, native Fe oxidised to produce magnetite and the starting montmorillonite material was transformed to Fe-rich smectite only when the Fe was added predominantly as Fe metal rather than Fe oxide (magnetite). The Fe-rich smectite was initially Fe(II)-rich, which oxidised to produce an Fe(III)-rich form on exposure to air. The expansion of this material on ethylene glycol solvation was much reduced compared to the montmorillonite starting material. TEM imaging shows that partial loss of tetrahedral sheets occurred during transformation of the montmorillonite, resulting in adjacent layers becoming H-bonded with a 7 Å repeat. The reduced swelling property of the Fe-smectite product may be due predominantly to the structural disruption of smectite layers and the formation of H-bonds. Solute activities corresponded to the approximate stability field calculated for hypothetical Fe(II)-saponite. In the second series of experiments, significant smectite alteration was only observed at 250 °C and the product contained a small proportion of a 7 Å repeat structure, observable by XRD. In these experiments, solute activities coincide with berthierine. The experiments indicate that although bentonite is still a desirable choice of backfill material for HLW repositories, some loss of expandability may result if montmorillonite is altered to Fe-rich smectite at the interface between steel canisters and bentonite.     

Variation in fold geometry in the Yuso basin, northern Spain: implications for the deformation regime

First generation structures in greywackes of the Yuso Group from the Cantabrian Mountains of northern Spain show a distinct variation in geometry with depth in a regional synclinal structure (Curavacas and Lechada synclines); they are easily distinguished from other deformation events. In the structurally uppermost level we find ‘flap folds’. Flap folds are recumbent structures with the inverted limb preserved. Below this level ‘cascade folds’ are found. These structures have a vergence opposite to that of parasitic folds. The nomenclature adopted is from Harrison and Falcon. Characteristically, these structures have shallowly dipping axial surfaces, in agreement with the shallow dip of the axial plane (regional) cleavage. In the lowermost structural level, upright parasitic folds with a steep cleavage are present. The variation in fold geometry is accompanied by a general steepening of the regional cleavage with increasing depth. In the absence of overprinting relationships the F₁ fold geometries are included in a single deformation event.The steepening of the cleavage with depth reflects the change in orientation of the maximum shortening direction from sub-vertical in the upper part of the syncline to sub-horizontal in the lower part. With increasing depth the deformation regime during F₁ changed from bending to buckling. The deformation regime on the regional scale, however, is associated with basement subsidence and passive formation of the regional synclinal structure. Furthermore, the absence of a distinct microfabric for the different F₁ folds indicates that on a small scale a similar deformation regime was present. We conclude, therefore, that the scale at which we study a structure only reflects the deformation regime at that particular scale. Consequently, the overall deformation regime cannot be determined from single outcrops or microstructural analysis alone.