Space based disaster management of 2008 Kosi floods,North Bihar,India

One of the most important elements in flood disaster management is the availability of timely information for taking decisions and actions by the authorities. During the August 18, 2008 Kosi floods which impacted India and Nepal and affected more than three million people, aero-space technology proved to be a critical input for providing vital information on flood inundation. The satellite based flood inundation maps were extensively used for identifying marooned villages, submerged roads and railway tracks and carrying out the relief and rescue operations by the state agencies. Decision Support Centre (DSC) at National Remote Sensing Centre (NRSC) kept a constant watch on the flood situation. More than 200 flood inundation maps, using about 30 satellite datasets were generated and provided in near real time mode to the state agencies during August to October, 2008. DSC efforts were primarily focused in providing an overall picture of the flood situation in a short span of time to the state agencies. The present paper discusses about the operational use of remote sensing technology for near real time flood mapping, monitoring of Kosi floods and the satellite based observations made for the Kosi river breach.     

In situ tests for ice strength measurements

Ice effects have caused extensive damage. Enormous forces have been recorded. On the other hand, ice has been used as a structural material under various situations. To use ice beneficially and to assess the danger of ice forces, it is necessary to know the mechanical properties of ice.Results from the large number of ice tests carried out in laboratories show the difficulties of sampling and testing procedures. Most of the tests have not reproduced faithfully enough the conditions existing in nature. To obtain adequate results, laborious and slow samplings and preparations of test specimens have been necessary. Recently, extensive use has been made of in situ tests in order to reduce the number of factors whixh can induce errors in measurements. Large scale tests have simulated actual structures. General ice properties have become available from small-scale in situ tests. Since these tests give rapid results, a large number are already available with a good coverage of field conditions.A theoretical basis has been devised for these in situ tests which measure essentially the unconfined and confined compressive strengths of ice, and practical devices have been developed to execute these tests. A correlation of measurements from laboratory tests and in situ tests has established a link between natural and artificial environments. Brittle elastic and clastic theories have been applied, to find the best correlations for ice tests. Test results have been related to the mechanical properties as used in engineering practice.A very summary conclusion of results is that cold sea ice and cold fresh water ice are both very strong. However, depending on the load rate, ice can be quite brittle, which mitigates dangerous effects from ice action against massive structures.     

Estimation of the leeway drift of small craft

Small craft (<6·4 m) leeway is determined as a function of the wind speed in the range of 5–20 knots (3·6–10·3 m/sec). Leeway is calculated relative to the surface current by measurement of the separation distance of the small craft from a dyed patch of surface water at sea, using time-sequenced aerial photography. Leeway increases linearly with wind speed for small craft equipped with or without a sea anchor in the wind range studied. Leeway for small craft without sea anchor can be calculated from the equation U_L = 0.07 U_W + 0.04 where U_W is the wind speed at 2 m elevation. Leeway for small craft drifted off the be calculated from the equation U_LD = 0·05 U_W − 0·12. The small craft drifted off the downwind direction in about 80% of the experiments. The drift angle is variable and difficult to predict.     

Preservation conditions and the use of sediment pigments as a tool for recent ecological reconstruction in four Northern European estuaries

Down-core sediment pigment concentrations from four Northern European estuaries were measured using high-performance liquid chromatography (HPLC) to investigate phytoplankton community structure and preservation conditions over the last ca. 100 years where all sites have experienced different levels of eutrophication. Phytoplankton pigments have been shown to be useful biomarkers for phytoplankton community structure and abundance due to their taxonomic specificity. The pigment concentrations and sediment pigment inventory showed large variation between the four sites. Concentrations ranged from more than 6000 nmol/g OC to less than 100 nmol/g OC and the inventory integrated over the top 10 cm from more than 300 nmol/cm² to less than 30 nmol/cm² for total identified pigments. Good pigment preservation in Mariager Fjord (Denmark) reflected the almost permanently anoxic conditions. Pigments in Laajalahti (Finland) showed peak concentrations around the time of highest nitrogen loading events known from historical and modelled records over the past 100 years. In contrast, poor down-core preservation of pigments (especially carotenoids) was observed in the Ems-Dollard (The Netherlands) and Himmerfjärden (Sweden) estuaries. The Ems-Dollard site is an intertidal mudflat that experiences daily exposure to light and air, which enhances pigment degradation. In Himmerfjärden, resuspension is an important process affecting both the sedimentation rate and degradation properties. The different preservation conditions at the four sites were supported by the differences in two degradation indicators; the ratio of pheopigment-a to chlorophyll-a and total carotenoids to total pigments. Class-specific carotenoid pigments represented the dominant algal groups reported from each site, however, no distinct down-core changes in the pigment composition were observed at any of the four sites. This indicated that changes in plankton community structure on the group level have been limited over this time period or masked by low preservation of pigments.     

Seasonal and spatial variation in abundance and egg production of Paracalanus parvus (Copepoda: Calanoida) in/out Jiaozhou Bay, China

The spatial distribution of stage-specific abundance and reproduction of the copepod Paracalanus parvus were studied from October 2005 to September 2006 in the Jiaozhou Bay. This copepod occurred continuously in this bay throughout the year. The species reached the lowest abundance in April and peaked in June. From October to December, distribution center mainly occurred in offshore water and at the mouth of the bay. In winter, early copepodites and adults gradually decreased and till February, most of the population was only comprised of CIV–CV stages. Overwintering copepodites matured in March and males tended to mature before female. From May to September, each stage occurred in the population and gradually reached high abundance. Temperature and chlorophyll a (Chl-a) concentration in the three stations can't clearly explain the seasonal variation in stage-specific abundance, so we surmised the important effect of the Yellow Sea. Egg production rate (EPR) reached its lowest in winter and peaked in June at 60.8 eggs female⁻¹ day⁻¹ in nearshore water. In the warming period, EPR in nearshore water was statistically higher and EPR > 10 eggs female⁻¹ day⁻¹ lasted longer than that in offshore water, showing the importance of nearshore water for recruitment of P. parvus. Our study showed that EPR was positively related to temperature and total chlorophyll a in offshore water and mouth of the bay. In nearshore water, the relationships between EPR and temperature and Chl-a in three size fractions were not the same as those in offshore water, suggesting complicated ecosystem in such a eutrophic area in warming period.     

Studies on the determination of inorganic iodine in seawater

Existing methods for the determination of the various forms of iodine present in seawater are laborious or unwieldy in use. This paper describes modified forms of the iodate and total iodine methods described by Barkley and Thompson (1960), a spectrophotometric procedure for iodate determination derived from Johannesson's (1958) work, and an automatic method for total iodine determination. Procedures for iodate and total-iodine determination which are suitable for use aboard ship, are recommended. Both procedures for iodate determination returned a standard deviation close to 0.5 μg/l when several replicate samples of a seawater containing approximately 30 μg/l of iodate-iodine were analysed. The automatic method for total iodine determination yielded a standard deviation of 0.8 μg/l by the repeated analysis of a seawater containing a total of approximately 50 μg/l of iodine. Suitable methods for the filtration and storage of seawater are also described.     

A free air gravity anomaly contour map of the Irish continental margin

Compilation of currently-available gravity data permits the construction of a free-air anomaly contour map of the continental margin west of Ireland (51–54 N). Major elements in the structure of the margin, previously delineated on the basis of seismic reflection and magnetic surveys, are clearly seen on the FAA contour map, notably the Porcupine Seabight Trough, and Porcupine Ridge. However, contrary to earlier ideas, the gravity data imply that the Seabight Trough extends northwards onto the Slyne Ridge; and the Slyne Trough, formerly regarded as northeasterly prolongation of the Seabight Trough, appears to be a discrete, fault-bounded, feature separated from the latter by a basement ridge. East-west gravity profiles are modelled in terms of thinned crust with the Moho at a minimum depth of 15 km beneath the axis of the Seabight Trough. The models tend to support hypotheses invoking formation of the Seabight Trough by simple westward translation of Porcupine Ridge with respect to the Irish Mainland.     

Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

Prediction of ocean waves based on the single-parameter growth equation of wind waves

A method for the prediction of ocean waves was developed on the basis of the single-parameter growth equation of wind waves, proposed byToba (1978) on the basis of similarity in growing wind waves. The applicability of the method to actual problems was tested by hindcasting the wave characteristics with the method, for two cases with differing time and space scales, one in Kii Channel Approach, Japan, and the other in the North Atlantic Ocean. The results showed that the present method can predict waves within an error of 1.3 m in wave heights, which ranged from 3 to 12 m.