First encounter with a live male blanket octopus: The world's most sexually size‐dimorphic large animal

The first encounter with a live male blanket octopus, Tremoctopus violaceus Chiaie, 1830, illustrates the most extreme example of sexual size‐dimorphism in a non‐microscopic animal. Females attain sizes of up to 2 m long—almost 2 orders of magnitude larger than the 2.4‐cm‐long male. Weight ratios between the sexes are at least 10 000:1 and are likely to reach 40 000:1. Sexual selection and the unique defensive strategy of carrying cnidarian stinging tentacles may both have contributed to the evolution of this extreme size‐dimorphism. Such dimorphism is not seen in any other animal remotely as large.     

Reproductive cues in Panulirus ornatus

Two experiments were performed to assess the effect of photoperiod and temperature on spawning of Panulirus ornatus. In experiment 1, sexually mature lobsters taken from the wild during summer were held at one of two photoperiods, winter (13 Light: 11 Dark) and summer (14.5 Light:9.5 Dark). Additionally, lobsters were also exposed to either summer (29°C) or winter (24°C) average water temperatures. Spawning was significantly greater when animals were exposed to summer photoperiod than to winter photoperiod, irrespective of temperature. Although a higher percentage of lobsters spawned when placed under a higher temperature, this trend was not statistically significant. In experiment 2, sexually mature lobsters were taken from the wild during winter and exposed to the same two photoperiods as in experiment 1, at a summer equivalent temperature of 29°C. Breeding started earlier and was more successful at the summer photoperiod. Time to first breeding was 17 weeks after exposure to summer photoperiod, compared with less than 1 week in experiment 1, and did not occur until individuals had moulted. Moulting occurred in 81% of lobsters, primarily after an increase in temperature to 29°C. The time between moulting and mating was varied and there was no significant difference in moult frequency between the two experimental photoperiods. After the lobsters had moulted, breeding success was reached earlier if photoperiod was lengthened. Results suggest photoperiod is the primary cue for the onset of gonad maturity and mating activity, with temperature playing a less important role. Physiological rest and possibly a moult may be required between breeding seasons before spawning can occur. Furthermore, temperature may be an important cue for pre‐reproduction moulting.     

Behaviour of hatchery‐reared and wild‐caught 4th and 5th stage American lobsters,Homarus americanus

Behavioural deficiencies in 4th and 5th stage hatchery‐reared lobsters were examined using time budget analysis and predator trials. Hatchery‐reared 4th stage lobsters were found to behave differently than wild‐caught lobsters and differences existed between hatchery‐reared lobsters from different sources. Local hatchery‐reared 4th stage lobsters spent less time on shelter and suffered higher predator rates in laboratory trials than both wild‐caught 4th stage and lobsters reared in a hatchery in Maine. Fifth stage hatchery‐reared lobsters spent significantly more time in shelter than their wild‐caught counterparts. These differences may be attributable to the lack of development of proper predator‐avoidance behaviour and need to be understood and corrected to maximise the effect of enhancement projects.     

Sodium fluoroacetate (1080) residues in longfin eels,Anguilla dieffenbachii,following exposure to contaminated water and food

Captive longfin eels (Anguilla dieffenbachii) were exposed to the vertebrate pesticide sodium fluoroacetate (1080) in the water column and through the ingestion of cereal pellet baits or possum muscle and gut tissue that contained 1080 residue. No mortality or unusual behaviour (in comparison with the controls) occurred in eels that were exposed to 1080. However, significantly greater weight loss occurred in eels exposed to 1080 compared with those eels that were not. No residue was detected in tissues of eels exposed to 1080 cereal baits through ingestion and direct (dermal and respiratory) absorption, or through direct absorption only. Low concentrations of 1080 were detected in muscle tissue of eels that consumed contaminated possum muscle (x = 0.0174 μg/g) or gut (x = 0.0306 μg/g) tissue. The primary factors affecting the concentration of 1080 detected in eel tissue included the dose of 1080 (mg/kg) that each eel" receiveddate="and number of days since the eel last fed on contaminated tissue. Based on the 1080 concentrations measured in eels in this study, the risk of acute poisoning to humans from eating contaminated eel flesh is considered extremely low. Even so, national and international perceptions and food safety standards have the potential to limit eel exports and/or close an eel fishery if 1080 residue was discovered in tissue.     

Land‐use impacts and water quality targets in the intensive dairying catchment of the Toenepi Stream,New Zealand

Water quality monitoring in Toenepi Stream, New Zealand, started in 1995 in a study of dairy farming influences on lowland stream quality and has continued since then with brief interruptions. Surveys have provided information about changes in farm and soil management practices as they relate to environmental sustainability. Although average water quality in Toenepi Stream has changed little during 1995–2004, there have been some notable improvements. Water clarity measured by black disc has improved from 0.6m to 1.5m, and median ammonia‐N and nitrate‐N concentrations have declined by 70% and 57%, respectively. The frequency and magnitude of extreme concentrations have declined—most notably for nitrogen (N) forms, which also had decreased mean values. Specific yields for suspended solids (SS) and phosphorus (P) forms in 2002–04 were 47–67% of 1995–97 values, mainly because of lower water yields. Reduced specific yields for N forms in 2002–04 (34–37% of 1995–97 yields) were also attributable to lower mean concentrations in stream water. Faecal bacteria concentrations have not abated and are on average 2–3 times recommended guideline values for contact recreation. Fewer dairy farms and an increased proportion irrigating dairyshed effluent to land, rather than discharging it to the stream via two‐pond systems, were likely causes of improvement in water quality. Water quality targets were developed for Toenepi Stream to achieve contact recreation criteria for the Piako River (downstream) and for intrinsic habitat values for Toenepi Stream. A range of mitigation measures has been formulated to meet these targets, but substantial uptake of sustainable farming practices is needed to improve water quality in Toenepi Stream.     

Sea Levels and Coastal Inundation Due to Tropical Cyclones in Indian Coastal Regions of Andhra and Orissa

Coastal inundation associated with extreme sea levels is the main factor which leads to the loss of life and property whenever a severe tropical cyclonic storm hits the Indian coasts. The Andhra and Orissa coasts are most vulnerable for coastal inundation due to extreme rise in sea levels associated with tropical cyclones. Loss of life may be minimized if extreme sea levels and associated coastal flooding is predicted well in advance. Keeping this in view, location specific coastal inundation models are developed and applied for the Andhra and Orissa coasts of India. Several numerical experiments are carried out using the data of past severe cyclones that struck these regions. The simulated inland inundation distances are found to be in general agreement with the reported flooding.     

Numerical Simulation of North Indian Ocean State Prior to the Onset of SW Monsoon Using SSM/I Winds

The Sea Surface Temperatures (SST) and currents are simulated over the north Indian Ocean, during the onset phase of southwest monsoon for the three years 1994, 1995, and 1996, using daily Special Sensor Microwave/Imager (SSM/I) winds and National Center for Environmental Prediction (NCEP) heat fluxes as forcings in the 2½ layer thermodynamic numerical ocean model. The results are discussed for the 30-day period from 16 May to 13 June for all the three years, to determine the ocean state during the onset phase of SW monsoon. The maximum variability in the simulated SST is found along the Somali coast, Indian coasts, and equatorial regions. The maximum SST in the North Arabian Sea is found to be greater than 30°C and minimum SST in the west equatorial region is 25°C during the onset phase of all three years. Model SSTs are in agreement with Reynolds SST. SST gradients in the north-south as well as in the east-west directions, west of 80°E are found to change significantly prior to the onset. It can be inferred from the study that the SST gradient of 2.5°C/2000 km is seen due north and due west of the region 2° - 7°S, 60° - 65°E, about 8 to 10 days prior to the arrival of SW monsoon near Kerala coast. Upper and lower layer circulation fields do not show prominent interannual variability.     

Integrating Uncertainty Theories with GIS for Modeling Coastal Hazards of Climate Change

Prediction of coastal hazards due to climate change is fraught with uncertainty that stems from complexity of coastal systems, estimation of sea level rise, and limitation of available data. In-depth research on coastal modeling is hampered by lack of techniques for handling uncertainty, and the available commercial geographical information systems (GIS) packages have only limited capability of handling uncertain information. Therefore, integrating uncertainty theory with GIS is of practical and theoretical significance. This article presents a GIS-based model that integrates an existing predictive model using a differential approach, random simulation, and fuzzy set theory for predicting geomorphic hazards subject to uncertainty. Coastal hazard is modeled as the combined effects of sea-level induced recession and storm erosion, using grid modeling techniques. The method is described with a case study of Fingal Bay Beach, SE Australia, for which predicted responses to an IPCC standard sea-level rise of 0.86 m and superimposed storm erosion averaged 12 m and 90 m, respectively, with analysis of uncertainty yielding maximum of 52 m and 120 m, respectively. Paradoxically, output uncertainty reduces slightly with simulated increase in random error in the digital elevation model (DEM). This trend implies that the magnitude of modeled uncertainty is not necessarily increased with the uncertainties in the input parameters. Built as a generic tool, the model can be used not only to predict different scenarios of coastal hazard under uncertainties for coastal management, but is also applicable to other fields that involve predictive modeling under uncertainty.     

Impact of Ocean Mean Dynamic Topography on Satellite Data Assimilation

The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements.

The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.

Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated.     

Evidence That Sea State Bias is Different for Ascending and Descending Tracks

Jason-1 and TOPEX/Poseidon (T/P) measured sea-surface heights (SSHs) are compared for five regions during the verification tandem phase. The five regions are of similar latitude and spatial extent and include the Gulf of Mexico, Arabian Sea, Bay of Bengal, and locations in the Pacific and Atlantic Oceans away from land. In all five regions, a bias, defined as Jason SSH—TOPEX-B SSH, exists that is different for ascending and descending tracks. For example, in the Gulf of Mexico the bias for ascending tracks was ?0.13 cm and the bias for descending tracks was 2.19 cm. In the Arabian Sea the bias for ascending tracks was ?2.45 cm and the bias for descending tracks was ?1.31 cm. The bias was found to depend on track orientation and significant wave height (SWH), indicating an error in the sea state bias (SSB) model for one or both altimeters. The bias in all five regions can be significantly reduced by calculating separate corrections for ascending and descending tracks in each region as a function of SWH. The correction is calculated by fitting a second-order polynomial to the bias as a function of SWH separately for ascending and descending tracks. An additional constraint is required to properly apply the correction, and we chose to minimize the sum of the TOPEX-B and Jason-1 root-mean-square (rms) crossover differences to be consistent with present SSB models. Application of this constraint shows that the correction, though consistent within each region, is different for each region and that each satellite contributes to the bias. One potential source that may account for a portion of the difference in bias is the leakage in the wave forms in TOPEX-B due to differing altitude rates for ascending and descending tracks. Global SSB models could be improved by separating the tracks into ascenders and descenders and calculating a separate SSB model for each track.