Effect of confining stress and loading frequency on dynamic behavior of municipal solid waste in Kahrizak landfill

In order to analyze the stability of a landfill site, it should analyze some properties of waste introducing the main structural elements. Up to now, it has not been done much research on the properties of municipal solid waste. In addition, due to the differences in waste properties from one country to another and even from one to another landfill site, it is impossible to generalize the results. These conditions caused local research on the evaluation of static and dynamic parameters of municipal solid waste to be done. Because Iran is a seismic country, the short-term behavior of waste controls landfill sites stability during seismic loads; so it is necessary to know the dynamic behavior of these materials. In this paper, about 18 cyclic tests were performed, and in addition to determining the dynamic parameters of municipal solid waste of Tehran Kahrizak Disposal Site using cyclic triaxial test, the effect of confining stress and loading frequency on dynamic properties of these materials was evaluated. The results have shown that with increasing the confining stress and loading frequency, shear modulus and damping ratio was increased and decreased, respectively, and it is related to the composition of the municipal solid waste materials.     

Application of magnetic adsorbent with silicate and phenyl polymers to adsorb Rhodamine B

The extensive use of Rhodamine B (RhB) for textile, paper, pigment, food, cosmetic, and drug manufacturing and its indiscriminate disposal leads to serious human, biological, and environmental hazards. A magnetic adsorbent with silicate and phenyl polymers (Ph/SiO₂/Fe₃O₄) has been prepared to absorb RhB. The morphology and structure of the adsorbents have been characterized by TGA, XRD, FTIR, and adsorption–desorption measurement. The results revealed that Ph/SiO₂/Fe₃O₄ exhibited a paramagnetic behavior and could easily and quickly be separated from a suspension. The RhB adsorption behavior was almost pH independent due to the adsorption between the phenyl ring of Ph/SiO₂/Fe₃O₄ and RhB by π–π electron-donor–acceptor interactions. The adsorption behavior of RhB adsorption was in good agreement with the Langmuir adsorption isotherm, and the maximum adsorption capacity was 142.186 mg g^?1. Good desorption performance of Ph/SiO₂/Fe₃O₄ showed that this novel magnetic adsorbent cannot only be activated by ethanol extraction process but also reuse by the recovery of magnetic force.     

Hydrogeochemical Features of Thermal Waters of South Trungbo (Central Vietnam)

The results of studying the features of the hydrogeological structure and chemical and isotope composition of thermal waters from the central part of Vietnam that are characterized by intense manifestations of intrusive magmatism are presented. It is established that low–and high–thermal waters with temperature varying within 30–85°C are developed in the area under study. The value of total mineralization of the hydrotherms ranges from 0.05 to 10.05 g/dm³. It is assumed that the circulation of thermal waters that are different in temperature and chemical composition occurs at two levels. The regular change of the hydrotherm composition in the direction from mineralized chloride sodium, including with increased Ca content, to fresh sodium bicarbonate is revealed. The ratio of δ¹⁸O–δ²H isotopes indicates that the water component is based on meteoric water. In the coastal areas, there is an isotope shift towards the ocean waters, which is also confirmed by the hydrogeochemical data. The key factors for forming the chemical composition of the thermal waters in South Trungbo are their genetic type, the interaction processes in the “water–rock–gas–organic substance” system, and their equilibrium–nonequilibrium state.     

Paleogene–Neogene Boundary of Primorye,Russian Far East

Complex geological and paleobotanic analysis of sections of the boundary Oligocene–Miocene sediments of southern Primorye is conducted. The presence of a stratigraphic hiatus is identified in the transitional complexes of the Pushkino and Pavlovka depressions but not in the sections of the Rakovka depression; thus, it is suggested to use one of them (borehole no. 15) to choose the stratotype of the Paleogene–Neogene boundary. The previous conclusion on the presence of economic coal deposits of Primorye within the Paleogene part of the Tertiary complex is supported. It is suggested to use the section which is exposed by the Rakovka brown coal open pit (point 9209) as a stratotype of the upper subformation of the Pavlovka Formation.     

An orthotropic interface damage model for simulating drying processes in soils

The study of drying process in soils has received an increased attention in the last few years. This is very complex phenomenon that generally leads to the formation and propagation of desiccation cracks in the soil mass. In recent engineering applications, high aspect ratio elements have proved to be well suited to tackle this type of problem using finite elements. However, the modeling of interfaces between materials with orthotropic properties that generally exist in this type of problem using standard (isotropic) constitutive model is very complex and challenging in terms of the mesh generation, leading to very fine meshes that are intensive CPU demanding. A novel orthotropic interface mechanical model based on damage mechanics and capable of dealing with interfaces between materials in which the strength depends on the direction of analysis is proposed in this paper. The complete mathematical formulation is presented together with the algorithm suggested for its numerical implementation. Some simple yet challenging synthetic benchmarks are analyzed to explore the model capabilities. Laboratory tests using different textures at the contact surface between materials were conducted to evaluate the strengths of the interface in different directions. These experiments were then used to validate the proposed model. Finally, the approach is applied to simulate an actual desiccation test involving an orthotropic contact surface. In all the application cases the performance of the model was very satisfactory.     

Investigating the hydrogeological properties of springs in a karstic aquifer in Dorfak region (Guilan Province,Iran)

Karstic aquifers are considered as the main sources of groundwater in the northeast of Rudbar, Iran. The present study was conducted to evaluate the hydrogeological properties of karstic springs in this region. For this purpose, saturation indices (SI values) were calculated using the geochemical PHREEQC model for a number of minerals in the groundwater in the karstic aquifer. Moreover, AqQA-RockWare software packages were used to prepare hydrogeochemical plots for the aquifer, using which the sources of the ions in the water were identified. The origin of bicarbonate, calcium, and magnesium ions in water was determined using chloro-alkaline indices. Moreover, through plotting a Piper diagram for spring water samples, it was discovered that water type of all springs is the Ca-HCO₃ type, confirming the karstic characteristic of springs in the area. A Durov diagram also suggests that the water composition of the springs is of the bicarbonate type with the dominant Ca cation, suggesting the calcareous effects of the region on the quality of groundwater and exhibiting a single source for the springs. The calculated saturation indices show that most of the water samples are undersaturated with respect to calcite, dolomite, and CO₂. The stable isotopes (δ¹⁸O and δ²H) and deuterium excess values were used to get information about transport pathways in groundwater, atmospheric moisture, and the degree of interaction between these reservoirs. The degree of karstification of the recharge area of the karst aquifer was determined to be 5.5 from an analysis of the hydrograph Sefidab Spring.     

Effect of heat treatment on dynamic properties of selected rock types taken from the Salt Range in Pakistan

Temperature is one of the variables that influence the elasto-plastic behavior and integrity of rock outcrops. Fluctuations in temperature can trigger alteration of some of the mineral properties and impact the brittle-plastic transition. Initiation and propagation of thermally induced tension cracks tend to weaken most rock types. The principal goal of this study was to anticipate impacts of thermal stress-strain cycles on the dynamic response of representative rock units exposed in the Khewra Gorge of the Salt Range Punjab of Pakistan. Ten types of sedimentary rock units were sampled, including marl, dolomite, three types of limestone, and five different sandstones exhibiting varying characteristics in outcrop. Boulder specimens were collected from the field and transported to the laboratory to prepare 50 drill cores that could be subjected to thermal cycling between 50 and 200 °C in increments of 50 °C. Room temperature core samples were tested using an Erudite resonance frequency meter to measure their Q-factors and the resonance frequency (F_r) at an applied loading frequency of 7 KHz with 0.01 V output voltage. Results suggest that thermal cycling tends to reduce the dynamic Young’s modulus (E_d) and Q-factor. Other parameters, such as damping ratio (ξ), specific damping capacity (Ψ), and loss factor (?) appeared to increase with increasing temperature cycles, likely as a result of developing thermally induced tensile fractures. The resultant values of the null hypothesis (t-critical and t-stats) suggests that the null hypothesis can be discarded because there was no observable difference between the measured and expected values for the cores tested. The observations and data emanating from this study might be useful in designing low-level radioactive waste landfills, nuclear waste repositories, and deep underground excavations where the increased temperature could alter the mechanical behavior of the parent rock mass.     

Economic potentials of industrial rocks and minerals in the Azraq basin,NE Jordan

The Azraq basin (the Badia region in NE-Jordan) is rich in its industrial rocks and minerals. Most of the commodities are concentrated in one area, which is the Azraq depression (El-Qa’). The climatic changes (wet and dry) of Azraq closed lake contributed in the formation of industrial rocks and minerals in the El-Qa’. Basalt, pyroclastics, zeolites, diatomaceous earth, bentonite, palgorskite, porcelanite, saline brines, chalk, limestone, and gypsum are the potential industrial commodities. The basaltic rocks are of high alkalis content and good homogeneity and are of good potential use in constructions and cast basalt. The scoriaceous pyroclastic material proved to be of excellent properties for use as lightweight aggregates, cultivation purposes, and for the production of pozzolanic cement. Smectite-rich beds (bentonite) from Ein El Badia could be used as binder, absorbent, and additives for feeding farm animals. Palygorskite is potential for use in drilling mud, paint, pharmaceuticals, and as a filtering medium. The diatomaceous earth deposits are Moler type and could be used as filter aid and absorbent. Zeolites are efficient for agricultural purposes, animal waste, and wastewater treatment plants. Saline brine is exploited in the Azraq mudflat area for table salt. Porcelanite could be used as an absorbent of hazardous elements, abrasive, and filler. The softness and high purity of chalk enable its use as filler and in the lime production. The large limestone concretions are of high quality for use as a building stone. Gypsum (gypcrete) could be used after the removal of the undesired chert impurities. The Badia region is a highly potential area for future exploration and mining industry in a manner that achieves the required outcomes and minimizes impacts on ecosystems.     

Anisotropic Continuous-in-Scale Universal Multifractal Cascades: Simulation,Analysis and Correction Methods

Continuous-in-scale multifractal cascades has long been an attractive choice for mathematically modeling turbulent and turbulent-like geophysical fields. These fields are usually anisotropic as they are subject to both stratification and rotation, thereby questioning the isotropy assumption often made to model them. The self-affine and generalized scale invariance approaches to scaling are used here to introduce anisotropy in such models. These anisotropic simulations have (1) unresolved large-scale features and (2) statistics that deviate from the desired power-law scaling mainly in the small scales. The former issue is solved via nesting, whereas the latter is attempted to be overcome using singularity correction methods. While earlier studies have proposed isotropic correction methods, here they have been generalized to correct anisotropic simulations. These singularity corrections seem to improve the small-scale statistical properties of mildly anisotropic simulations; nesting, on the other hand, appears to enhance statistics over almost all scales even for strongly anisotropic simulations. Both the correction and nesting techniques lead to a reduction in computational time and memory usage suggesting that nested singularity-corrected cascades offer a better framework for quantitatively modeling the atmosphere, ocean, solid earth, and associated fields.