Hydraulic Characteristics of Rough Fractures in Linear Flow under Normal and Shear Load

Summary A hydro-mechanical testing system, which is capable of measuring both the flow rates and the normal and shear displacement of a rock fracture, was built to investigate the hydraulic behaviour of rough tension fractures. Laboratory hydraulic tests in linear flow were conducted on rough rock fractures, artificially created using a splitter under various normal and shear loading. Prior to the tests, aperture distributions were determined by measuring the topography of upper and lower fracture surfaces using a laser profilometer. Experimental variograms of the initial aperture distributions were classified into four groups of geostatistical model, though the overall experimental variograms could be well fitted to the exponential model. The permeability of the rough rock fractures decayed exponentially with respect to the normal stress increase up to 5 MPa. Hydraulic behaviours during monotonic shear loading were significantly affected by the dilation occurring until the shear stress reached the peak strength. With the further dilation, the permeability of the rough fracture specimens increased more. However, beyond shear displacement of about 7 to 8 mm, permeability gradually reached a maximum threshold value. The combined effects of both asperity degradation and gouge production, which prohibited the subsequent enlargement of mean fracture aperture, mainly caused this phenomenon. Permeability changes during cyclic shear loading showed somewhat irregular variations, especially after the first shear loading cycle, due to the complex interaction from asperity degradations and production of gouge materials. The relation between hydraulic and mechanical apertures was analyzed to investigate the valid range of mechanical apertures to be applied to the cubic law. Received June 12, 2001; accepted February 26, 2002 Published online September 2, 2002     

A comparison of early juvenile red drum densities among various habitat types in Galveston Bay, Texas

Seagrass meadows are often cited as important nursery areas for newly settled red drum even though many estuaries, such as Galveston Bay, Texas, support large numbers of red drum and have limited seagrass cover, suggesting the use of alternate nursery areas. We examined patterns of habitat use for newly settled red drum at six sampling areas in Galveston Bay; two areas had seagrass beds and four areas had no seagrass. We measured densities in different habitat types using epibenthic sleds and enclosure samplers. Peak recruitment of young red drum to the estuary occurred during September through December. Highest densities of new settlers were found in seagrass meadows (primarilyHalodule wrightii), but when seagrass was absent, the highest densities of red drum occurred along theSpartina alterniflora marsh edge interface. Densities were relatively low on nonvegetated bottom away from the marsh edge. We also examined density patterns in other habitat types at selected sampling areas and found no red drum within marsh vegetation away from the marsh edge interface (5 and 10 m into the marsh interior). Oyster reefCrassostrea virginica was sampled using lift nets, and we found no red drum using this habitat, although adjacent seagrass and marsh interface habitats were used. Even though red drum densities in marsh edge were low relative to seagrass, the large areal extent of marshes in the bay complex probably makes marsh edge the most important nursery habitat for red drum in Galveston Bay.     

Formation of refractory inclusions by evaporation of condensate precursors

Berman’s (1983) activity-composition model for CaO-MgO-Al₂O₃-SiO₂ liquids is used to calculate the change in bulk chemical and isotopic composition during simultaneous cooling, evaporation, and crystallization of droplets having the compositions of reasonable condensate precursors of Types A and B refractory inclusions in CV3 chondrites. The degree of evaporation of MgO and SiO₂, calculated to be faithfully recorded in chemical and isotopic zoning of individual melilite crystals, is directly proportional to evaporation rate, which is a sensitive function of P_H2, and inversely proportional to the droplet radius and cooling rate. When the precursors are partially melted in pure hydrogen at peak temperatures in the vicinity of the initial crystallization temperature of melilite, their bulk chemical compositions evolve into the composition fields of refractory inclusions, mass-fractionated isotopic compositions of Mg, Si, and O are produced that are in the range of the isotopic compositions of natural inclusions, and melilite zoning profiles result that are similar to those observed in real inclusions. For droplets of radius 0.25 cm evaporating at P_H2 = 10⁻⁶ bar, precursors containing 8 to 13 wt.% MgO and 20 to 23% SiO₂ evolve into objects similar to compact Type A inclusions at cooling rates of 2 to 12 K/h, depending on the precise starting composition. Precursors containing 13 to 14 wt.% MgO and 23 to 26% SiO₂ evolve into objects with the characteristics of Type B1 inclusions at cooling rates of 1.5 to 3 K/h. The relatively SiO₂-poor members of the Type B2 group can be produced from precursors containing 14 to 16 wt.% MgO and 27 to 33% SiO₂ at cooling rates of <1 K/h. Type B2’s containing 27 to 35 wt.% SiO₂ and <12% MgO require precursors with higher SiO₂/MgO ratios at MgO > 15% than are found on any condensation curve. The characteristics of fluffy Type A inclusions, including their reversely zoned melilite, can only be understood in the context of this model if they contain relict melilite.     

Laboratory measurements and modeling of metal-humic interactions under estuarine conditions

Equilibrium dialysis was used to measure Co- and Cu-binding by an isolated peat humic acid (PHA) in controlled laboratory experiments under simulated estuarine conditions: ionic strengths of 0.005 to 0.7 M in NaCl and mixed Na-Mg-Ca chloride solutions, with trace metal concentrations of ∼5 × 10⁻⁷ M, a PHA concentration of 10 mg/L, and at constant pH values of ∼7.8 (Co and Cu) and ∼4.6 (Cu only). Generally, Co- and Cu-humic binding decreased substantially with increasing ionic strength and, in the case of Cu, with decreasing pH. The presence of seawater concentrations of Ca and Mg had a relatively small effect on Co-humic binding and no measurable effect on that of Cu under the experimental conditions. The binding data were well-described by an equilibrium speciation code (the Windermere Humic Aqueous Model, WHAM) after optimising the fits by varying the metal-proton exchange constants for humic acid within justifiable limits (i.e., within 1 standard deviation of the mean exchange constants used in the WHAM database). The main factor producing the observed variations in metal-humic binding at constant pH was the electrostatic effect on the humic molecule. WHAM was used to predict Co- and Cu-humic binding in simulations of real estuaries. Co-humic binding is predicted to be relatively unimportant (generally <5% of total Co), whereas the Cu-humic complex is likely to be the dominant species throughout an estuary. The main factors producing changes in Co- and Cu-humic binding in the real-estuary simulations are the electrostatic effect on the humic molecule, ligand competition (mainly from carbonate species) for metals, and to a lesser extent Ca and Mg competition for humic binding sites. Variations in pH are significant only at the freshwater end of an estuary. WHAM simulations also indicated that competition effects between metals are more likely to occur in freshwaters than in seawater, due to enhanced electrostatic binding at low ionic strength.     

Impact of suboxia on sinking particulate organic carbon: Enhanced carbon flux and preferential degradation of amino acids via denitrification

Fluxes of particulate organic carbon (POC) through the oxygen deficient waters in the eastern tropical North Pacific were found to be relatively less attenuated with depth than elsewhere in the eastern North Pacific. The attenuation coefficient (b) for the flux was found to be 0.40 versus the composite value of 0.86 determined by Martin et al. (1987). To examine this further, sinking POC was collected using sediment traps and allowed to degrade in oxic and suboxic experiments. Using a kinetic model, it was found that degradation proceeded at similar rates (roughly 0.8 day⁻¹) under oxic and suboxic conditions, but a greater fraction of bulk POC was resistant to degradation in the suboxic experiments (61% vs. 23%). Amino acids accounted for 37% of POC collected at 75m, but following degradation the value dropped to 17% and 16% in the oxic and suboxic experiments respectively. POC collected from 500m was 10% amino acids. The non-AA component of POC collected at 75m was not degraded under suboxic conditions, while under oxic conditions it was. These results suggest that microbes degrading OC under suboxic conditions via denitrification preferentially utilize nitrogen-rich amino acids. This preferential degradation of amino acids suggests that 9% more nitrogen may be lost via water column denitrification than is accounted for when a more “Redfieldian” stoichiometry for POC is assumed.     

Morphologic and spectral investigation of exceptionally well-preserved bacterial biofilms from the Oligocene Enspel formation, Germany

The fossilised soft tissues of a tadpole and an associated coprolitic structure from the organic-rich volcanoclastic lacustrine Upper Oligocene Enspel sediments (Germany) were investigated using high-resolution imaging techniques and nondestructive in situ surface analysis. Total organic carbon analysis of the coprolite and the sediment revealed values of 28.9 and 8.9% respectively. The soft tissues from the tadpole and the coprolite were found to be composed of 0.5 to 1 μm-sized spheres and rod shapes. These features are interpreted as the fossil remains of bacterial biofilms consisting probably of heterotrophic bacteria and fossilised extracellular polymeric substances. They became fossilised while in the process of degrading the organic matter of the organism and the coprolite. Comparison with a modern marine biofilm revealed morphologic details identical to those observed in the fossil bacterial biofilms. Although the fossil biofilms on both macrofossils exhibited identical microtextures, their mode of preservation was inhomogeneous and varied between calcium phosphate and an as yet unidentified mineral phase consisting mainly of Si, Ca, Ti, P, and S, but also showing the presence of Mg, Al, and Fe. The coprolite consists purely of fossilised bacterial cells in a densely packed arrangement and associated fossilised extracellular polymeric substances.In addition to preliminary imaging and energy-dispersive X-ray analysis, both the fossil biofilms and the sediment were investigated by nondestructive in situ analysis using time of flight-secondary ion mass spectroscopy (ToF-SIMS). The mass spectra obtained on the coprolite in mass-resolved chemical mapping mode allowed the tentative identification of a number of organic secondary ion species. Some spectra appear to indicate the presence of bacterial hopanoids, but further work using standard techniques such as gas chromatography mass spectroscopy is needed to conclusively verify the presence of these substances. Nevertheless, ToF-SIMS chemical maps were successfully correlated with electron microscopy images, allowing the correlation of molecular spectra, the spatial distribution of individual organic species, and specific morphologic features to demonstrate the potential of this approach in the analysis of microfossils.     

Crystallization conditions of Los Angeles, a basaltic Martian meteorite

The texture of Los Angeles (stone 1) is dominated by relatively large (0.5−2.0 mm) anhedral to subhedral grains of pyroxene, and generally subhedral to euhedral shocked plagioclase feldspar (maskelynite). Minor phases include subhedral titanomagnetite and ilmenite, Fe-rich olivine, olivine+augite-dominated symplectites [some of which include a Si-rich phase and some which do not], pyrrhotite, phosphate(s), and an impact shock-related alkali- and silica-rich glass closely associated with anhedral to euhedral silica grains. Observations and model calculations indicate that the initial crystallization of Mg-rich pigeonitic pyroxenes at ≤1150 °C, probably concomitantly with plagioclase, was followed by pigeonitic and augitic compositions between 1100 and 1050 °C whereas between 1050 and 920 to 905 °C pyroxene of single composition crystallized. Below 920 to 905 °C, single composition Fe-rich clinopyroxene exsolved to augite and pigeonite. Initial appearance of titanomagnetite probably occurred near 990 °C and FMQ-1.5 whereas at and below 990 °C and ≥FMQ-1.5 titanomagnetite and single composition Fe-rich clinopyroxene may have started to react, producing ilmenite and olivine. However, judging from the most common titanomagnetite compositions, we infer that most of this reaction likely occurred between 950 and 900 °C at FMQ-1.0±0.2 and nearly simultaneously with pyroxene exsolution, thus producing assemblages of pigeonite, titanomagnetite, olivine, ilmenite, and augite. We deem this reaction as the most plausible explanation for the formation of the olivine+augite-dominated symplectites in Los Angeles. But we cannot preclude possible contributions to the symplectites from the shock-related alkali- and silica-rich glass or shocked plagioclase, and the breakdown of Fe-rich pigeonite compositions to olivine+augite+silica below 900 °C. Reactions between Fe-Ti oxides and silicate minerals in Los Angeles and other similar basaltic Martian meteorites can control the T-fO₂ equilibration path during cooling, which may better explain the relative differences in fO₂ among the basaltic Martian meteorites.     

New W-isotope evidence for rapid terrestrial accretion and very early core formation

The short-lived ¹⁸²Hf-¹⁸²W-isotope system is an ideal clock to trace core formation and accretion processes of planets. Planetary accretion and metal/silicate fractionation chronologies are calculated relative to the chondritic ¹⁸²Hf-¹⁸²W-isotope evolution. Here, we report new high-precision W-isotope data for the carbonaceous chondrite Allende that are much less radiogenic than previously reported and are in good agreement with published internal Hf-W chronometry of enstatite chondrites. If the W-isotope composition of terrestrial rocks, representing the bulk silicate Earth, is homogeneous and 2.24 ε_182W units more radiogenic than that of the bulk Earth, metal/silicate differentiation of the Earth occurred very early. The new W-isotope data constrain the mean time of terrestrial core formation to 34 million years after the start of solar system accretion. Early terrestrial core formation implies rapid terrestrial accretion, thus permitting formation of the Moon by giant impact while ¹⁸²Hf was still alive. This could explain why lunar W-isotopes are more radiogenic than the terrestrial value.     

An X-ray absorption fine structure and nuclear magnetic resonance spectroscopy study of gallium-silica complexes in aqueous solution

The influence of aqueous silica on gallium(III) hydrolysis in dilute (2 × 10⁻⁴ ≤ m_Ga ≤ 5 × 10⁻³) and moderately concentrated (0.02 ≤ m_Ga ≤ 0.3) aqueous solutions was studied at ambient temperature, using high resolution X-ray absorption fine structure (XAFS) and nuclear magnetic resonance (NMR) spectroscopies, respectively. Results show that, in Si-free acidic solutions (pH < 3), Ga is hexa-coordinated with oxygens of H₂O molecules and/or OH groups in the first coordination sphere of the metal. With increasing pH, these hydroxyl groups are progressively replaced by bridging oxygens (-O-), and polymerized Ga-hydroxide complexes form via Ga-O-Ga chemical bonds. In the 2.5-3.5 pH range, both XAFS and NMR spectra are consistent with the dominant presence of the Ga₁₃ Keggin polycation, which has the same local structure as A1₁₃. Under basic pH (pH > 8), Ga exhibits a tetrahedral coordination, corresponding to Ga(OH)₄⁻ species, in agreement with previous NMR and potentiometric studies. Major changes in Ga hydrolysis have been detected in the presence of aqueous silica. Ga is tetra-coordinated, both in basic and acid (i.e., at pH > 2.7) Si-bearing solutions (0.01 ≤ m_Si ≤ 0.2), and forms stable gallium-silicate complexes. In these species, Ga binds via bridging oxygen to 2 ± 1 silicons, with an average Ga-Si distance of 3.16 ± 0.05 Å, and to 2 ± 1 silicons, with an average Ga-Si distance of 3.39 ± 0.03 Å. These two sets of Ga-Si distances imply the formation of two types of Ga-silicate aqueous complex, cyclic Ga-Si_2-3 species (formed by the substitution of Si in its tri-, tetra- or hexa-cyclic polymers by Ga atoms), and chainlike GaSi_2-4 species (similar to those found for A1), respectively. The increase in the number of Si neighbors (a measure of the complex concentration and stability), in alkaline media, with increasing SiO₂(aq) content and decreasing pH is similar to that for A1-Si complexes found in neutral to basic solutions. At very acid pH and moderate silica concentrations, the presence of another type of Ga-Si complex, in which Ga remains hexa-coordinated and binds to the silicon tetrahedra via the GaO₆ octahedron corners, has also been detected. These species are similar to those found for Al³⁺ in acid solutions. Thus, as for aluminum, silicic acid greatly hampers Ga hydrolysis and enhances Ga mobility in natural waters via the formation of gallium-silicate complexes.