Hydrothermal Metalliferous Sediments and Waters Off the Lesser Antilles

Considerable metal enrichments have been found in hydrothermal fluids and metalliferous sediments off the central Lesser Antilles Volcanic Arc. The elements variably enriched in the fluids as a result of the hydrothermal activity are Fe, Mn, As, Si, B, Li and in the sediments, Fe, P, Mo, As, Sb, Hg, Cu and Pb. Variations in the concentrations of these elements in both fluids and sediments along the arc result from a number of factors, the most important of which is the stage that each island's volcano has reached in its eruptive cycle. Although hydrothermal mineralization on the sea floor off the islands is only low grade, phase separation in the hydrothermal fluids at depth could be leading to higher grade stockwork mineralization below the vent fields or the discharge of metal rich brines on the lower flanks of the volcanic islands.     

Beginning integrated coastal management efforts in Madagascar

Integrated coastal management (ICM) is an emerging approach in East Africa for the solution of various coastal issues. This paper is intended to provide an update on the current practical aspects concerning the ICM process and related policies and strategies in Madagascar. Efforts are being made in Madagascar for the mutual integration of numerous coastal projects and activities within the Environment Program of the National Environmental Action Plan. The foundations for an ICM program, built during an ICM workshop, which took place at the end of 1996 upon existing activities, are being expanded presently. These developments concern, above all, the institutional aspects related to the formulation of an ICM program. Therefore, the actual situation sees an overgrowing collaboration of the national and international agencies involved in the implementation of coastal projects, in an expandingly integrating way, within an institutional framework that grows progressively stronger. The case of Madagascar suggests reflections on how ICM can mitigate potential sectoral conflicts as well as on, how the sometimes complex nature of the social and cultural issues may influence the development of an ICM program. The need for monitoring ICM is stressed and the role of outside partners clarified.     

Composition and quantitative distribution of macrozoobenthos in Amur Bay

The data on the species composition, trophic structure, and distribution of macrozoobenthos in Amur Bay obtained in 2001 are presented. Long-term changes in the benthos are analyzed. In 2001, the total benthos biomass significantly increased, although the parameters of the species richness declined as compared to 1986–1989. In 2001, as well as in the 1970s and 1980s, the benthos trophic structure was characterized by the prevalence of deposit feeders. The entire structure of the benthos is evaluated as an eutrophic one. Eutrophication of the bay is considered to be the most probable cause of the negative changes in the benthic communities of the bay in 2001, as well as 15 years ago.     

Sources and biogeochemical cycling of particulate selenium in the San Francisco Bay estuary

As part of a study of estuarine selenium cycling, we measured the concentration, chemical form (speciation), and distribution of particulate selenium under various river flow conditions in the North San Francisco Bay (from the Golden Gate to the Sacramento and San Joaquin Rivers). We also conducted laboratory studies on the accumulation of selenium by phytoplankton, the critical first step in the transformation of dissolved to particulate selenium. Total particulate selenium concentration in the North SF Bay was relatively constant between high and low flow periods, ranging spatially from 0.05 to 0.35 nmol l⁻¹ and comprising between 5 and 12% of the total water column selenium inventory. Mean concentrations were generally highest in the Carquinez Strait–Suisun Bay region (salinity 0–17) and lowest in Central Bay. However, selenium content of suspended particles varied with river flow, with higher content during low flow (9.76 ± 4.17 nmol g⁻¹; mean ± sd; n = 67) compared to high flow (7.10 ± 4.24 nmol g⁻¹; n = 39). Speciation analyses showed that most particulate selenium is organic selenide (45 ± 27%), with a smaller proportion (typically <30%) of adsorbed selenite + selenate and a varying proportion (35 ± 28%) of elemental selenium. Based on the amount of elemental selenium in the seston (total suspended material), we calculate that resuspension of estuarine sediments could contribute 29–100% of particulate selenium in the water column. While selenium content of SF Bay seston (>0.4 μm) is relatively unenriched compared to phytoplankton (13.6–155 nmol g⁻¹ dry weight) on a mass basis, when normalized to carbon or nitrogen, seston contains a similar selenium concentration to SF Bay sediments or phytoplankton cultures. SF Bay seston is thus comprised of selenium-rich phytoplankton and phyto-detritus, but also inorganic clay mineral particles that effectively “dilute” total particulate selenium. Selenium concentrations in algal cultures (11 species) exposed to 90 nmol l⁻¹ selenite show relatively large differences in selenium accumulation, with the diatoms, chlorophytes and cryptophytes generally having lower selenium cell content (3.8 ± 2.7 × 10⁻⁹ nmol selenium cell⁻¹) compared to the dinoflagellates (193 ± 73 × 10⁻⁹ nmol selenium cell⁻¹). Because phytoplankton are such a rich (but variable) source of selenium, their dynamics could have a profound effect on the particulate selenium inventory in the North SF Bay.     

NPZ Models of Plankton Dynamics: Their Construction, Coupling to Physics, and Application

Nutrient-phytoplankton-zooplankton (NPZ) models have been in use in oceanography for at least three decades, and are still a common research tool. Given the discoveries of the last two decades, particularly concerning the role of bacteria in the plankton, there are questions as to whether NPZ models can still be supported as a useful tool in planktonic research. Here I review the construction of NPZ models, and some of the physical platforms they have been coupled to. I then discuss the applications of NPZ-physical models, and conclude that they still constitute an important and viable research tool, provided that the questions being explored are clearly stated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Imbalance in the carbonate budget of surficial sediments in the North Atlantic Ocean: variations over the last millenium?

Fluxes contributing to the particulate carbonate system in deep-sea sediments were investigated at the BENGAL site in the Porcupine Abyssal Plain (Northeast Atlantic). Deposition fluxes were estimated using sediment traps at a nominal depth of 3000 m and amounted to 0.37±0.1 mmol C m⁻² d⁻¹. Dissolution of carbonate was determined using flux of total alkalinity from in situ benthic chambers, is 0.4±0.1 mmol C m⁻² d⁻¹. Burial of carbonate was calculated from data on the carbonate content of the sediment and sedimentation rates from a model age based on ¹⁴C dating on foraminifera (0.66±0.1 mmol C m⁻² d⁻¹). Burial plus dissolution was three times larger than particle deposition flux which indicates that steady-state is not achieved in these sediments. Mass balances for other components (BSi, ²¹⁰Pb), and calculations of the focusing factor using ²³⁰Th, show that lateral inputs play only a minor role in this imbalance. Decadal variations of annual particle fluxes are also within the uncertainty of our average. Long-term change in dissolution may contribute to the imbalance, but can not be the main reason because burial alone is greater than the input flux. The observed imbalance is thus the consequence of a large change of carbonate input flux which has occured in the recent past. A box model is used to check the response time of the solid carbonate system in these sediments and the time to reach a new steady-state is in the order of 3 kyr. Thus it is likely that the system has been perturbed recently and that large dissolution and burial rates reflect the previously larger particulate carbonate deposition rates. We estimate that particulate carbonate fluxes have certainly decreased by a factor of at least 3 and that this change has occurred during the last few centuries.     

Transformation of black-sea waters in the Sea of Marmara

The analysis is performed on the basis of comparison of the hydrological characteristics of prestrait regions of the Sea of Marmara. It is shown that, in summer, the Black-Sea waters are weakly mixed with the Mediterranean waters and the levels of salinity in the prestrait regions differ by 0.6–0.9‰. In winter, the indicated difference increases and the level of salinity near the entrance of Dardanelles reaches 29‰ and exceeds the level observed near the entrance of Bosporus by 5.5‰. In the analyzed regions, we observe local temperature maxima and minima near the interface of two water masses. This is explained by the presence of strong seasonal variations of temperature for the Black-Sea waters and their absence for the Mediterranean waters. The physical mechanisms responsible for the seasonal variations of the intensity of transformations of the Black-Sea waters are discussed. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 2, pp. 49–55, March–April, 2007.     

The dimensions of sand ripples in full-scale oscillatory flows

New large-scale experiments have been carried out in two oscillatory flow tunnels to study ripple regime sand suspension and net sand transport processes in full-scale oscillatory flows. The paper focuses on ripple dimensions and the new data are combined with existing data to make a large dataset of ripple heights and lengths for flows with field-scale amplitudes and periods. A feature of the new experiments is a focus on the effect of flow irregularity. The combined dataset is analysed to examine the range of hydraulic conditions under which oscillatory flow ripples occur, to examine the effects of flow irregularity and ripple three-dimensionality on ripple dimensions and to test and improve existing methods for predicting ripple dimensions.The following are the main conclusions. (1) The highest velocities in a flow time-series play an important role in determining the type of bedform occurring in oscillatory flow. Bedform regime is well characterised by mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth peak velocities in the case of irregular flow. (2) For field-scale flows, sand size is the primary factor determining whether equilibrium ripples will be 2D or 3D. 2D ripples occur when the sand D₅₀ ≥ 0.30 mm and 3D ripples occur when D₅₀ ≤ 0.22 mm (except when the flow orbital diameter is low). (3) Ripple type (2D or 3D) is the same for regular and irregular flows and ripple dimensions produced by equivalent regular and irregular flows follow a similar functional dependence on mobility number, with mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth velocities in the case of irregular flow. For much of the ripple regime, ripple dimensions have weak dependency on mobility number and ripple dimensions are similar for regular and irregular flows with the same flow orbital amplitude. However, differences in ripples produced by equivalent regular and irregular flows become significant at the high mobility end of the ripple regime. (4) Ripple dimensions predicted using the Wiberg and Harris formulae are in poor agreement with measured ripple dimensions from the large-scale experiments. Predictions based on the Mogridge et al. and the Nielsen formulae show better overall agreement with the data but also show systematic differences in cases of 3D ripples and ripples generated by irregular flows. (5) Based on the combined large-scale data, modifications to the Nielsen ripple dimension equations are proposed for the heights and lengths of 2D ripples. The same equations apply to regular and irregular flows, but with mobility number appropriately defined. 3D ripples are generally smaller than 2D ripples and estimates of 3D ripple height and length may be obtained by applying multipliers of 0.55 and 0.73 respectively to the 2D formulae. The proposed modified Nielsen formulae provide an improved fit to the large-scale data, accounting for flow irregularity and ripple three-dimensionality.     

Electronic atlas of the Russian Arctic coastal zone

A set of digital maps including geology, Quaternary sediments, landscapes, engineering-geological, vegetation, geocryological and the series of regional sources have been selected to characterize the Russian Arctic coast. Based on this data, new maps of engineering geocryological zoning and zoning of the coast with respect to the intensity of exogenous geological processes and risk of technogenic impacts have been generated at the scales of 1:4,000,000–1:8,000,000. These maps are a tool to assess the impact of industry on the Arctic coast of the country.