The role of granites in volcanic-hosted massive sulphide ore-forming systems: an assessment of magmatic�Chydrothermal contributions

Assessment of geological, geochemical and isotopic data indicates that a significant subgroup of volcanic-hosted massive sulphide (VHMS) deposits has a major or dominant magmatic?Chydrothermal source of ore fluids and metals. This group, which is typically characterised by high Cu and Au grades, includes deposits such as those in the Neoarchean Doyon-Bousquet-LaRonde and Cambrian Mount Lyell districts. These deposits are distinguished by aluminous advanced argillic alteration assemblages or metamorphosed equivalents intimately associated with ore zones. In many of these deposits, ??³⁴S_sulphide is low, with a major population below ?3??; ??³⁴S_sulphate differs from coexisting seawater and ??³⁴S_{sulphate?Csulphide}????20?C30??. These characteristics are interpreted as the consequence of disproportionation of magmatic SO₂ as magmatic?Chydrothermal fluids ascended and cooled and as a definitive evidence for a significant magmatic?Chydrothermal contribution. Other characteristics that we consider diagnostic of significant magmatic?Chydrothermal input into VHMS ore fluids include uniformly high (>3 times modern seawater values) salinities or very ¹⁸O-enriched (??¹⁸O?>?5??) ore fluids. We do not consider other criteria [e.g. variable salinity, moderately high ??¹⁸O_fluid (2?C5??), ??³⁴S_sulphide near 0??, metal assemblages or a spatial association with porphyry Cu or other clearly magmatic-hydrothermal deposits] that have been used previously to advocate significant magmatic?Chydrothermal contributions to be diagnostic as they can be produced by non-magmatic processes known to occur in VHMS mineral systems. However, in general, a small magmatic?Chydrothermal contribution cannot be excluded in most VHMS systems considered. Conclusive data that imply minimal magmatic?Chydrothermal contributions are only available in the Paleoarchean Panorama district where coeval seawater-dominated and magmatic?Chydrothermal systems appear to have been physically separated. This district, which is characterised by chloritic and sericitic alteration assemblages and lacks aluminous advanced argillic alteration assemblages, is typical of many VHMS deposits around the world, suggesting that for ??garden variety?? VHMS deposits, a significant magmatic?Chydrothermal contribution is not required. Other than deposits associated with advanced argillic alteration assemblages, the only deposit for which we ascribe a major magmatic?Chydrothermal contribution is the Devonian Neves Corvo deposit. This deposit differs from other deposits in the Iberian Pyrite Belt and around the world in being extremely Sn-rich, with the Sn closely associated with Cu and in having formed from high ¹⁸O-rich fluids (??¹⁸O_fluid ??8.5??). We consider these characteristics, particularly the last, as diagnostic of a significant magmatic hydrothermal contribution. Our analysis indicates that two subgroups of VHMS deposits have a major magmatic?Chydrothermal contribution: Cu/Au-rich deposits with aluminous alteration assemblages and reduced, very Sn-rich deposits in which Sn was introduced in a high-temperature ore assemblage. Comparison with ??normal?? VHMS deposits suggests that these subgroups of VHMS deposits may form in specialised tectonic environments. The Cu/Au-rich deposits appear to form adjacent to magmatic arcs, an environment conducive to the generation of hydrous, oxidised melts by melting metasomatised mantle in the wedge above the subducting slab. This contrasts with the back-arc setting of ??normal?? VHMS deposits in which relatively dry granites (In this contribution, we use the term granite sensu latto) formed by decompression melting drive seawater-dominated hydrothermal circulation. The tectonic setting of highly Sn-rich VHMS deposits such as Neves Corvo is less clear; however, thick continental crust below the ore-hosting basin may be critical, as it is in other Sn deposits.     

The Batu Hijau porphyry copper-gold deposit, Sumbawa Island, Indonesia

The Batu Hijau porphyry Cu---Au deposit lies in southwest Sumbawa Island, Indonesia. It is a world-class porphyry Cu deposit in an island are setting, and is typical of this deposit type in most features, including igneous association, morphology, hydrothermal alteration and mineralisation style.The region was not previously recognised as a porphyry Cu province; disseminated Cu sulphides were first recognised in float samples in southwest Sumbawa in 1987. Associated stream sediment sampling identified a broad area of anomalous Au and Cu in an area of greater than 5 km² around Batu Hijau, including 169 ppb Au in BLEG samples and 580 ppm Cu in stream silts 1 km from the deposit. Mineralisation in bedrock at surface contains > 0.1 wt % Cu and > 0.1 ppm Au over an area of 0.6 km × 1.2 km, including a zone 300 m × 900 m containing > 0.3 wt % Cu. Areas with elevated Mo (> 30 ppm) form a distinctive annulus around this Cu-rich zone.Batu Hijau mineralisation is hosted in a tonalite intrusive complex, and diorite and metavolcanic wallrocks. There are no post-mineralisation igneous intrusions or breccia pipes within the deposit. The main tonalite intrusion forms a stock in the centre of the deposit, where it generally displays intensely pervasive potassic (biotite with magnetite-quartz) alteration and hosts most of the higher grade mineralisation. Younger tonalite dykes intruding the centre of this stock are generally less altered and mineralised than the older tonalite.The core zone of potassic alteration grades outward into extensive propylitic alteration (chlorite-epidote), with both variably overprinted by widespread fracture controlled intermediate argillic alteration (sericite-chlorite), and minor phyllic (sericite-pyrite) and sodic (albite) alteration. Argillic (sericite-kaolinite) and advanced argillic (kaolinite-alunite-pyrophyllite) assemblages occur near surface.Copper and Au grades within the orebody show a positive correlation with quartz stockwork intensity, although disseminated Cu sulphides are also common. Chalcopyrite and bornite are the principle hypogenal minerals, with minor chalcocite. Oxidation extends to a depth of 5 m to 85 m below surface across the deposit, and is underlain by weak supergene mineralisation. Drill testing of the deposit down to 650 m below surface reveals a single cylindrical to conical orebody of 334 million tonnes grading 0.8 wt % Cu and 0.69 gm per tonne Au; the depth extent of mineralisation is unknown.     

Fluid--Rock Interaction during Low-Pressure Polymetamorphism of the Reynolds Range Group, Central Australia

Marbles and metapelites from the Reynolds Range Group (centralAustralia) were regionally metamorphosed at low pressure duringM₂ at 1.6 Ga, M₂ ranged in grade from greenschist to granulitefacies along the length of the Reynolds Range, and overprinted1.78 Ga granites and their contact aureoles in the ReynoldsRange Group metasediments. At all M₂ grades the marbles andmetapelites have highly variable oxygen isotope ratios [marbles:¹⁸O(carb) 14–20%; metapelites: ¹⁸O 6–14%). Similarly, 1.78 Ga granites have highly variable oxygen isotope ratios(¹⁸O 5–13%), with the lowest values occurring at thegranite margins. In all rock types, the lowest oxygen isotopevalues are consistent with the infiltration of channelled magmaticand/or meteoric fluids. The variable lowering of oxygen isotopevalues resulted from pre-M₂ contact metamorphism and fluid—rockinteraction around the 1.78 Ga granites. In contrast, mineralassemblages in the marbles define a trend of increasing X_CO2with increasing grade from <0.05 (greenschist facies) to0.7–1.0 (granulite facies). This, together with the lackof regionally systematic resetting of oxygen isotope ratios,implies that there was little fluid—rock interaction duringprograde regional metamorphism. KEY WORDS: low pressure; polymetamorphism; fluids; stable isotopes; petrology ^*Corresponding author Fax: 61–3–94791272. e-mail: geoisb{at}lure.latrobe.edu.au     

Hydrologic factors controlling groundwater salinity in northwestern coastal zone,Egypt

The aim of this article is to assess the main factors influencing salinity of groundwater in the coastal area between El Dabaa and Sidi Barani, Egypt. The types and ages of the main aquifers in this area are the fractured limestone of Middle Miocene, the calcareous sandstone of Pliocene and the Oolitic Limestone of Pleistocene age. The aquifers in the area are recharged by seasonal rainfall of the order of 150 mm/year. The relationship of groundwater salinity against the absolute water level, the well drilling depth, and the ability of aquifer to recharge has been discussed in the present work. The ability of aquifer to locally recharge by direct rainfall is a measure of the vertical permeability due to lithological and structural factors that control groundwater salinity in the investigated aquifers. On the other hand, the fracturing system as well as the attitude of the surface water divide has a prime role in changing both the mode of occurrence and the salinity of groundwater in the area. Directly to the west of Matrouh, where the coastal plain is the narrowest, and east of Barrani, where the coastal plain is the widest, are good examples of this concept, where the water salinity attains its maximum and minimum limits respectively. Accordingly, well drilling in the Miocene aquifer, in the area between El Negila and Barrani to get groundwater of salinities less than 5000 mg/l is recommended in this area, at flow rate less than 10 m³/hr/well. In other words, one can expect that the brackish water is probably found where the surface water divide is far from the shore line, where the Wadi fill deposits dominate (Quaternary aquifer), acting as a possible water salinity by direct rainfall and runoff.     

Giant Barkhausen jumps in Kamchatka basaltic lavas

Igneous rocks are shown to possess a magnetic fabric that admits the occurrence of giant Barkhausen jumps. It is also demonstrated that magnetic minerals of rocks can preserve information on a few magnetic fields (differing even in origin) and a few thermal magnetization temperatures.     

Hydrocarbon gases (C1–C5) and organic matter in bottom sediments of the Ivankovo Reservoir on the Volga River

The results of studying the composition of hydrocarbon gases (C₁–C₅) and organic matter in bottom sediments of the Ivankovo Reservoir in 1995, 2004, and 2005 are given. The methods used in the study include vapor-phase gas chromatography, instrumental pyrolysis gas chromatography, and mass-spectrometry for determining organic carbon δ ¹³C_org. The gas field of bottom sediments in different regions of the reservoir varies widely in terms of gas saturation and the spectrum of hydrocarbon gases. This suggests the heterogeneous composition of organic matter in the sediments and different conditions of its input and transformation processes. The gases were found to contain saturated hydrocarbons from methane to pentane C₁–C₅, including isomers i-C₄ and i-C₅ and unsaturated compounds C₂–C₄. A correlation was found to exist between methane distribution and the distribution of its more high-molecular homologues, which confirms their genetic relationship in bottom sediments. The obtained results show an increase in the rate of microbiological processes and organic matter transformation for most regions in the Ivankovo Reservoir. The only exceptions are the zones of Moshkovichskii Bay and the sections at Gorodnya and Konakovo, where technogenic organic matter is being accumulated. The high information value of hydrocarbon gases as biogeochemical markers of the sources of organic matter and the rates of its transformation is demonstrated. The isotopic composition of organic-matter carbon in the bottom sediments of the Ivankovo Reservoir δ ¹³C varies from ?26.21 to ?30.86‰.     

The use of MODIS data to derive acreage estimations for larger fields: A case study in the south-western Rostov region of Russia

Recent developments in remote sensing technology, in particular improved spatial and temporal resolution, open new possibilities for estimating crop acreage over larger areas. Remotely sensed data allow in some cases the estimation of crop acreage statistics independently of sub-national survey statistics, which are sometimes biased and incomplete. This work focuses on the use of MODIS data acquired in 2001/2002 over the Rostov Oblast in Russia, by the Azov Sea. The region is characterised by large agricultural fields of around 75 ha on average. This paper presents a methodology to estimate crop acreage using the MODIS 16-day composite NDVI product. Particular emphasis is placed on a good quality crop mask and a good quality validation dataset. In order to have a second dataset which can be used for cross-checking the MODIS classification a Landsat ETM time series for four different dates in the season of 2002 was acquired and classified. We attempted to distinguish five different crop types and achieved satisfactory and good results for winter crops. Three hundred and sixty fields were identified to be suitable for the training and validation of the MODIS classification using a maximum likelihood classification. A novel method based on a pure pixel field sampling is introduced. This novel method is compared with the traditional hard classification of mixed pixels and was found to be superior.     

Simulation of scree‐slope dynamics: investigating the distribution of debris avalanche events in an idealized two‐dimensional model

We present a two‐dimensional model of the development of scree slopes using the discrete‐element method. We concentrate on the dynamics of the accumulating debris at the cliff foot rather than on the failure modes of the cliff‐face or shape of the underlying rock surface. The evolution of this unconsolidated material is intermittent and systematically changing over time, with an early high disturbance regime, dominated by a characteristic event size (where 65% of particles in the debris are in motion to some extent), replaced at later times by many shallow slides interspersed with infrequent large events that involve motion through almost the full scree depth. These large slides lead to a stratigraphy in which the layers of material are stretched almost horizontal near the base of the slope. The scree surface thus shows a gradient in age with most recent rock‐fall close to the cliff and the oldest rock‐fall debris outcropping at the foot. The final surface slope tends to show little curvature, and the final mean slope is well correlated with the angle of internal friction of the particles, although the change is very small over a wide range of friction angles [final slope (in degrees relative to horizontal) ~ 0.043 × internal friction angle + 17.49, with a correlation coefficient of 0.89, p‐value 0.0001]. Some weak size‐segregation of the debris is found, but this seems to have little to do with individual particles bounding down the slope. The shape of the rock core agrees largely with the analytic forms given by Fisher–Lehmann and Bakker–Le Heux expressions, but the original simple Fisher quadratic can give the best fit. Overall the evolution shows a remarkable insensitivity to the model parameters, suggesting that the controls on dry scree‐slope evolution are primarily geometric in character. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of the natural organic matter in the removal of caffeine from water by fixed-bed column adsorption

The removal of caffeine from tap water by F-400 granular activated carbon in fixed-bed adsorption experiments was carried out. Textural and chemical characterization of the adsorbent through N₂ adsorption–desorption isotherms, Fourier transform infrared spectrometry, isoelectric point determination and scanning electron microscopy studies was developed in studies previously reported. Caffeine breakthrough curves and total organic carbon profiles at different operation conditions (inlet concentration, volumetric flow rate and mass of adsorbent) were obtained. These experimental results showed a displacement of the natural organic matter from the active sites exerted by caffeine molecules due to their higher affinity to the surface carbon. This behavior led to an overshooting, a local outlet natural organic matter concentration higher than the feed quantity. A competitive effect seems to be observed in the removal of the target compound, decreasing the efficiency of the process. Axial dispersion coefficients and dimensionless numbers were estimated for the caffeine removal onto F-400 activated carbon. Therefore, the regeneration of the adsorbent by adsorption–desorption cycles was studied.