Detailed mineralogical-geochemical study of a large spinel Lherzolite xenolith in alkali basalt of Shavaryn Tsaram paleovolcano,Mongolia

Mineralogical-geochemical data obtained on a large xenolith of spinel lherzolite from basanites of Shavaryn Tsaram volcano (Middle Pleistocene) provide evidence that the xenolith was affected by heat and fluid that came from the basalt melt and induced geochemical heterogeneity of the xenolith. Olivine crystals from the central portion of the xenolith contain much more CaO than this mineral from the peripheral zones of the xenolith as well as in xenocrystals of the host basalts. The large xenolith was unevenly annealed by the host basalt melt, and this predetermined the heterogeneous diffusion-controlled “purification” of olivine crystals from their CaO admixture. The xenolith is heterogeneously enriched in LREE and some trace elements (Zr, Hf, Nb, Th, and U), and their distribution demonstrates unclearly pronounced concentric zoning: these elements enriched the outer portions of the xenolith. The enrichment of the xenolith in LREE and other mobile trace elements is explained by their occurrence not only as structurally bound (isomorphic) components in minerals but also in the form of nonstructural admixtures (contaminant), as minute grains of compounds hosted in the interstitial space and tiny cracks cutting mineral grains. The enrichment of the xenolith in these admixtures proceeded via their infiltration-controlled introduction with fluid from the basalt along minute cracks.     

The Central Andean gravity high, a relic of an old subduction complex?

The Central Andean gravity high (CAGH) is a positive anomaly in isostatic residual gravity with its center located at the western flank of the Central Andes at about 24°S. The gravity was analyzed by various methods to draw quantitative conclusions about the sources of this anomaly and their process of formation. Methods include the analysis of the gravity gradients, power spectrum, wavelength filters, and Euler deconvolution.Numerical investigations of gravity field in the area of the CAGH indicate the presence of a dense body of nearly 400 km length and about 100–140 km width, that masses lie at varying depths between 10 and 38 km. A correlation between the location of the residual anomalies and the topographic lows in the area between the Salars de Atacama and Pipanaco is observed, which indicates the strong influence of the anomalous-causing rocks of the CAGH within the formation process of the Andean orogen. An influence of these causing bodies of rock on the trend of Holocene volcanic arc is likely. Genesis of the anomalous dense formations of rock could be traced back to Ordovician–Silurian time when a pre-Andean subduction zone is postulated in the region of northern Chile with its corresponding volcanic arc in the region of the CAGH.

Zusammenfassung

El campo de gravedad alto de los Andes Centrales (CAGH) consiste en una pronunciada anomalía positiva de la gravedad isostática, cuyo centro se encuentra en el borde oeste de los Andes Centrales a los 24°S. En este estudio se analizó el campo de gravedad mediante distintos métodos, de manera de poder establecer conclusiones cuantitativas sobre el causante de esta anomalía y el proceso de formación de este causante.La investigación numérica de las anomalías gravimétricas del CAGH indica la presencia de un cuerpo de alta densidad con aproximadamente 400 km de largo y 100–140 km de ancho, que se encuentra a profundidades variables entre 10 y 38 km. Se observa una correlación entre la posición de la anomalía residual y los bajos topográficos en los areas de Salares de Atacama, Arizaro, Antofalla y Pipanaco, la cual indica una fuerte influencia de rocas productoras de la anomalía en el CAGH, dentro del proceso de formación del orógeno andino. Es probable que estos cuerpos de rocas causantes de la anomalía tengan incluso influencia en el alineamiento del arco volcánico holocénico. La generación de cuerpos de rocas con una densidad anómala puede remontarse al Ordovícico–Silúrico, tiempo para el que postula una subducción pre-Andina en la región del norte de Chile y que corresponde con el arco volcánico en la región del CAGH.     

Sample Disturbance in Soft and Sensitive Clays: Analysis and Assessment

Despite the sophisticated methods employed to obtain high quality samples, they are prone to disturbance, due to stress release, let apart, due to sampling tools and techniques adopted. Critical reappraisal of different methods suggest that any method of sample quality assessment involving strength and deformation parameters would enable easier implementation and correct other engineering parameters for estimated sample disturbance. In this technical paper, sample disturbance index, using merely the slopes of compression paths, (representing mechanical response), in the pre- and post-yield stress regimes under odeometric loading conditions is proposed. This method is based on single oedometer test results on samples of unknown degrees of disturbance during sampling and handling. The unique feature of this approach is that the ideal rigid plastic material behavior is taken as reference. This eliminates the need for any additional experimental data or any calculations from the relationships formulated with any set of assumptions.     

Spectra of the Black-Sea tsunamis

We perform the analysis of the time spectra of four tsunamis generated in the Black Sea by the earthquakes of 26.07.1927, 11.09.1927, 26.12.1939, and 12.07.1966. For the analysis of the spectra, we used digitized marigrams obtained for 12 points of the Black-Sea coast. The obtained spectra are, as a rule, multimode and have 1–4 spectral maxima. One maximum corresponds to the periods typical of tsunami waves and the other maxima correspond to the oscillations of the sea level with lower frequencies. It seems likely that the events of tsunami are accompanied by low-frequency oscillations of the level caused by the atmospheric forcing, seiches, or other factors. In numerous cases, the oscillations from the predominant energy range lie outside the characteristic range of periods of the tsunami waves. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 5, pp. 21–30, September–October, 2007.     

Model estimates for the mean gas exchange between the ocean and the atmosphere under the conditions of the present-day climate and its changes expected in the 21st century

Annual mean fluxes of CO₂ and oxygen across the sea surface are estimated with the use of numerical modeling for several regions located in the Gulf Stream and Kuroshio zones. The present-day climatic conditions and the climatic conditions expected in the middle and at the end of the 21st century are considered. Specific features of gas exchange under a strong wind that are associated with gas exchange by bubbles and with changes in the air-water difference of the gas concentrations were taken into account in the calculations. The estimates obtained differ substantially from the results based on the traditional approach, which disregards the above features. A considerable increase in the absorption of CO₂ by the ocean, which is mainly caused by the continuing increase in the CO₂ concentration in the air during its small changes in the ocean, is expected in the 21st century. At the same time, no trends are revealed in the annual mean fluxes of oxygen across the ocean surface. The conclusion is made that, in calculations of CO₂ absorption by the world ocean, it is necessary to take into account both specific features of gas transfer under a strong wind and an increase in the atmospheric concentration of CO₂.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

Algorithm for HF radar vector current measurements

A new algorithm is proposed, called the stream function method (SFM) for producing vector current maps from radial data measured by dual-site high frequency surface wave radar (HFSWR). In SFM, a scalar stream function is constructed under some oceanographic assumptions. The function describes the two-dimensional (2-D) ocean surface water motion and is used to obtain the distribution of vector currents. The performance of SFM is evaluated using simulated radial data, which demonstrates that SFM has advantages over typical vectorial combination methods (VCM) both in error acceptance and robustness, and excels another method based on least-squares fitting (LSF) in recovering the complicated current models. Furthermore, SFM is capable of providing the total currents based on radials from single-site radar. We also test the assumptions of horizontal non-divergence in the simulation. The new algorithm is applied to the field experiment data of Wuhan University’s ocean state measuring and analyzing radar (OSMAR), collected in the coastal East China Sea during April 11–17, 2004. Quantitative comparisons are given between radar results by three current algorithms and in-situ current meter measurements. Preliminary analysis of the vertical current shear is given based on the current meter measurements.     

Method and results of assimilation of climatic data on temperature,salinity, and sea level into a numerical model of the Black Sea

A method for combined assimilation of climatic hydrologic fields of temperature, salinity, and the climatic dynamic level of the Black Sea into a model of sea dynamics is proposed. The monthly mean fields of the dynamic sea level were obtained from the results of assimilation of satellite altimetry data into the model. The statistical characteristics of errors in the forecasts of the level, salinity, and temperature were assumed to be proportional to the statistical characteristics of the differences between monthly mean climatic fields of temperature, salinity, and sea level calculated by means of assimilating altimetry observations of the sea level and analogous climatic hydrologic fields. The climatic fields of currents are reconstructed and analyzed. The assimilation of the climatic altimetry level allows the reproduction (in current fields) of quasi-stationary synoptic anticyclonic eddies located along the periphery of the Black Sea Rim Current.