Algorithm for HF radar vector current measurements

A new algorithm is proposed, called the stream function method (SFM) for producing vector current maps from radial data measured by dual-site high frequency surface wave radar (HFSWR). In SFM, a scalar stream function is constructed under some oceanographic assumptions. The function describes the two-dimensional (2-D) ocean surface water motion and is used to obtain the distribution of vector currents. The performance of SFM is evaluated using simulated radial data, which demonstrates that SFM has advantages over typical vectorial combination methods (VCM) both in error acceptance and robustness, and excels another method based on least-squares fitting (LSF) in recovering the complicated current models. Furthermore, SFM is capable of providing the total currents based on radials from single-site radar. We also test the assumptions of horizontal non-divergence in the simulation. The new algorithm is applied to the field experiment data of Wuhan University’s ocean state measuring and analyzing radar (OSMAR), collected in the coastal East China Sea during April 11–17, 2004. Quantitative comparisons are given between radar results by three current algorithms and in-situ current meter measurements. Preliminary analysis of the vertical current shear is given based on the current meter measurements.     

Tectonic core of a sedimentary drift: a potential ridge propagation feature beneath the Blake Outer Ridge

The Blake Outer Ridge is a 480–kilometer long linear sedimentary drift ridge striking perpendicular to the North American coastline. By modeling free-air gravity anomalies we tested for the presence of a crustal feature that may control the location and orientation of the Blake Outer Ridge. Most of our crustal density models that match observed gravity anomalies require an increase in oceanic crustal thickness of 1–3 km on the southwest side of the Blake Outer Ridge relative to the northeast side. Most of these models also require 1–4 km of crustal thinning in zone 20–30 km southwest of the crest of the Blake Outer Ridge. Although these features are consistent with the structure of oceanic fracture zones, the Blake Outer Ridge is not parallel to adjacent known fracture zones. Magnetic anomalies suggest that the ocean crust beneath this feature formed during a period of mid-ocean ridge reorganization, and that the Blake Outer Ridge may be built upon the bathymetric expression of an oblique extensional feature associated with ridge propagation. It is likely that the orientation of this trough acted as a catalyst for sediment deposition with the start of the Western Boundary Undercurrent in the mid-Oligocene.     

Transformation of black-sea waters in the Sea of Marmara

The analysis is performed on the basis of comparison of the hydrological characteristics of prestrait regions of the Sea of Marmara. It is shown that, in summer, the Black-Sea waters are weakly mixed with the Mediterranean waters and the levels of salinity in the prestrait regions differ by 0.6–0.9‰. In winter, the indicated difference increases and the level of salinity near the entrance of Dardanelles reaches 29‰ and exceeds the level observed near the entrance of Bosporus by 5.5‰. In the analyzed regions, we observe local temperature maxima and minima near the interface of two water masses. This is explained by the presence of strong seasonal variations of temperature for the Black-Sea waters and their absence for the Mediterranean waters. The physical mechanisms responsible for the seasonal variations of the intensity of transformations of the Black-Sea waters are discussed. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 2, pp. 49–55, March–April, 2007.     

Experimental studies on the slowly varying drift motion of a berthed container ship model

The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank.     

The dimensions of sand ripples in full-scale oscillatory flows

New large-scale experiments have been carried out in two oscillatory flow tunnels to study ripple regime sand suspension and net sand transport processes in full-scale oscillatory flows. The paper focuses on ripple dimensions and the new data are combined with existing data to make a large dataset of ripple heights and lengths for flows with field-scale amplitudes and periods. A feature of the new experiments is a focus on the effect of flow irregularity. The combined dataset is analysed to examine the range of hydraulic conditions under which oscillatory flow ripples occur, to examine the effects of flow irregularity and ripple three-dimensionality on ripple dimensions and to test and improve existing methods for predicting ripple dimensions.The following are the main conclusions. (1) The highest velocities in a flow time-series play an important role in determining the type of bedform occurring in oscillatory flow. Bedform regime is well characterised by mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth peak velocities in the case of irregular flow. (2) For field-scale flows, sand size is the primary factor determining whether equilibrium ripples will be 2D or 3D. 2D ripples occur when the sand D₅₀ ≥ 0.30 mm and 3D ripples occur when D₅₀ ≤ 0.22 mm (except when the flow orbital diameter is low). (3) Ripple type (2D or 3D) is the same for regular and irregular flows and ripple dimensions produced by equivalent regular and irregular flows follow a similar functional dependence on mobility number, with mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth velocities in the case of irregular flow. For much of the ripple regime, ripple dimensions have weak dependency on mobility number and ripple dimensions are similar for regular and irregular flows with the same flow orbital amplitude. However, differences in ripples produced by equivalent regular and irregular flows become significant at the high mobility end of the ripple regime. (4) Ripple dimensions predicted using the Wiberg and Harris formulae are in poor agreement with measured ripple dimensions from the large-scale experiments. Predictions based on the Mogridge et al. and the Nielsen formulae show better overall agreement with the data but also show systematic differences in cases of 3D ripples and ripples generated by irregular flows. (5) Based on the combined large-scale data, modifications to the Nielsen ripple dimension equations are proposed for the heights and lengths of 2D ripples. The same equations apply to regular and irregular flows, but with mobility number appropriately defined. 3D ripples are generally smaller than 2D ripples and estimates of 3D ripple height and length may be obtained by applying multipliers of 0.55 and 0.73 respectively to the 2D formulae. The proposed modified Nielsen formulae provide an improved fit to the large-scale data, accounting for flow irregularity and ripple three-dimensionality.     

Electronic atlas of the Russian Arctic coastal zone

A set of digital maps including geology, Quaternary sediments, landscapes, engineering-geological, vegetation, geocryological and the series of regional sources have been selected to characterize the Russian Arctic coast. Based on this data, new maps of engineering geocryological zoning and zoning of the coast with respect to the intensity of exogenous geological processes and risk of technogenic impacts have been generated at the scales of 1:4,000,000–1:8,000,000. These maps are a tool to assess the impact of industry on the Arctic coast of the country.     

Seasonal dynamics in pelagic fish abundance in a Baltic Sea coastal area

The spring-spawning Baltic Sea herring spawn in coastal areas that also serve as nursery areas for the young fish during their first summer. In a bay known as a herring spawning and nursery area, the pelagic fish abundance was quantified using hydroacoustics every second week from late spring to autumn in 2000 and 2001. A dense system of survey transects allowed determination of the acoustic index (the nautical area scattering coefficient) for fish abundance with high precision. The variation, expressed as the geostatistical coefficient of variation, was on average 5% both years and ranged from 3–11% (2000) and 3–8% (2001). Through the hydroacoustic data intra-annual dynamics in acoustic fish abundance, densities and size composition could be followed, which showed similar trends in both years. In spring and early summer acoustic fish densities were low, followed by a drastic, 20-fold increase in late summer. Hydroacoustic data and biological samples suggest that the increase was caused mainly by the recruitment of young-of-the-year herring to the acoustically assessable pelagic fish community. This age class is commonly not well represented in catches when using traditional sampling gears such as gill nets and trawls, and hydroacoustics may help to improve quantitative estimates of small juvenile fish in order to increase the understanding of biological processes in coastal nursery areas.     

Vertical distribution of the macrobenthic community and its relationships to trace metals and natural sediment characteristics in the lower Douro estuary, Portugal

Vertical distribution (0–15 cm) of the macrobenthic community and its relationships to natural sediment characteristics and trace metal contents and bioavailability were studied at five locations in the lower Douro estuary, Portugal. An analysis of vertical metal distribution, for the interpretation of anthropogenic impact on the estuarine sediments, was also investigated. Sediment characterisation included organic matter, grain size, metals (Al, Fe, Cu, Pb, Cr, Ni, Cd, Zn and Mn), acid volatile sulphide (AVS) and simultaneously extracted metals (SEM). The macrobenthic community had low diversity (14 species), was dominated by small size opportunists and seemed to be controlled mainly by natural factors such as grain size distribution, Al and Fe contents and sediment depth. The vertically heterogeneous distribution of macrobenthic community appears to affect redox status of the sediments and consequently metal bioavailability. Despite anthropogenic contamination in terms of Zn, Cu, Pb, Cr and Ni having already been detected in the north bank, the analysis of vertical distribution was essential for the identification of current anthropogenic contamination in terms of Zn, Pb and Cd in the south bank.     

Assessment of the impact of the planetary scale on the decay of blocking and the use of phase diagrams and enstrophy as a diagnostic

It was shown that abrupt changes in the large-scale structure of atmospheric flows may lead to the rapid decay of blocking. Analysis of phase diagrams made it possible to identify when sharp changes occurred in the dynamics of the system. The connection of these changes to the decay of blocking was estimated for three blocking events in the Southern Hemisphere. In addition to phase diagrams, enstrophy was used as a diagnostic tool for the analysis of blocking events. From the results of this analysis, four scenarios for the decay mechanisms were determined: (i) decay with a lack of synoptic-scale support, (ii) decay with an active role for synoptic processes, and (iii–iv) either of these mechanisms in the interaction with an abrupt change in the character of the planetary-scale flow.