Dust influx reconstruction during the last 26,000 years inferred from a sedimentary leaf wax record from the Japan Sea

We obtained the high-resolution record of terrestrial biomarkers (C₂₉ and C₃₁ n-alkanes) for the last 26,000 years from Oki Ridge in the south Japan Sea that enabled us to discuss millennial scale climate changes. Our sampling resolution for the biomarker during the major deglaciation period (10–19.5 cal ka BP) is 300 years and for the elemental analyses (total organic carbon and total nitrogen) is as good as ca 200 years. The estimated mass accumulation rate of these molecules during the last glacial period is substantially higher than during the Holocene. They also exhibited two distinct peaks at 17.6 cal ka BP and 11.4 cal ka BP, which are coincident with Heinrich Event 1 and the latest stage of the Younger Dryas, respectively. The unique oceanographic setting of the Japan Sea tends to preferentially preserve organic material of aeolian origin. The nature of our biomarker record in fact suggests a strong aeolian signal, and hence their flux to the Japan Sea potentially reflects the climate conditions of the dust source regions and transport intensity. Our results are consistent with previously reported monsoon variations based on other proxies that is indicative of a strong linkage between North Atlantic climate and Asian monsoon intensity.     

Depth dependence and exponential models of permeability in alluvial-fan gravel deposits

To determine depth dependence of permeability in various geologic deposits, exponential models have often been proposed. However, spatial variability in hydraulic conductivity, K, rarely fits this trend in coarse alluvial aquifers, where complex stratigraphic sequences follow unique trends due to depositional and post-depositional processes. This paper analyzes K of alluvial-fan gravel deposits in several boreholes, and finds exponential decay in K with depth. Relatively undisturbed gravel cores obtained in the Toyohira River alluvial fan, Sapporo, Japan, are categorized by four levels of fine-sediment packing between gravel grains. Grain size is also analyzed in cores from two boreholes in the mid-fan and one in the fan-toe. Profiles of estimated conductivity, $ \overline{K} $ , are constructed from profiles of core properties through a well-defined relation between slug-test results and core properties. Errors in $ \overline{K} $ are eliminated by a moving-average method, and regression analysis provides the decay exponents of $ \overline{K} $ with depth. Moving-average results show a similar decreasing trend in only the mid-fan above ～30-m depth, and the decay exponent is estimated as ≈0.11 m^?1, which is 10- to 1,000-fold that in consolidated rocks. A longitudinal cross section is also generated by using the profiles to establish hydrogeologic boundaries in the fan.     

Changes in extended boreal summer tropical cyclogenesis associated with large-scale flow patterns over the western North Pacific in response to the global warming hiatus

Climate Dynamics - This study examines extended boreal summer (May–October) tropical cyclogenesis events (TCGEs) associated with large-scale flow patterns (LFPs) over the western North...     

Improved provenance tracing of Asian dust sources using rare earth elements and selected trace elements for palaeomonsoon studies on the eastern Tibetan Plateau

The Asian Monsoon forms an important part of the earth’s climate system, yet our understanding of the past interactions between its different sub-systems, the East Asian and Indian monsoons, and between monsoonal winds and other prevailing wind currents such as the Westerly jet, is limited, particularly in central Asia. This in turn affects our ability to develop climate models capable of accurately predicting future changes in atmospheric circulation patterns and monsoon intensities in Asia. Provenance studies of mineral dust deposited in terrestrial settings such as peat bogs can address this problem directly, by offering the possibility to examine past deposition rates and wind direction, and hence reconstruct past atmospheric circulation patterns. However, such studies are challenged by several issues, most importantly the identification of proxies that unambiguously distinguish between the different potential dust sources and that are independent of particle size. In addition, a single analytical method that is suitable for sample preparation of both dust source (i.e. desert sand, soil) and receptor (i.e. dust archive such as peat or soil profiles) material is desirable in order to minimize error propagation derived from the experimental and analytical work. Here, an improved geochemical framework of provenance tracers to study atmospheric circulation patterns and palaeomonsoon variability in central Asia is provided, by combining for the first time mineralogical as well as major and trace elemental (Sc, Y, Th and the rare earth elements) information on Chinese (central Chinese loess plateau, northern Qaidam basin and Taklamakan, Badain Juran and Tengger deserts), Indian (Thar desert) and Tibetan (eastern Qinghai-Tibetan Plateau) dust sources.Quartz, feldspars and clay minerals are the major constituents of all studied sources, with highly variable calcite contents reflected in the CaO concentrations. Chinese and Tibetan dust sources are enriched in middle REE relative to the upper continental crust and average shale but the Thar desert has a REE signature distinctly different from all other dust sources. There are significant differences in major, trace and REE compositions between the coarse and fine fractions of the surface sands, with the finest <4 μm fraction enriched in Al₂O₃, Fe₂O₃, MnO, MgO and K₂O and the <32 μm fractions in Sc, Y, Th and the REE relative to the coarse fractions. The <4 μm fraction best represents the bulk REE geochemistry of the samples. The provenance tracers Y/∑REE, La/Er, La/Gd, Gd/Er, La/Yb, Y/Tb, Y/La, Y/Nd and to a certain extent the europium anomaly Eu/Eu^∗ (all REE normalized to post-Archean Australian shale, PAAS) are particle size-independent tracers, of which combinations of Y/∑REE, La/Yb, Y/Tb, Y/La and Eu/Eu^∗ can be used to distinguish the Thar desert, the Chinese deserts, the Chinese loess plateau and the Tibetan soils. Their independence upon grain size means that these tracers can be applied to the long-range provenance tracing of Asian dust even when only bulk samples are available in the source region. Combinations of La/Th, Y/Tb, Y/∑REE, Sc/La and Y/Er distinguish the Tibetan soils from the Chinese loess plateau and the Chinese deserts. La/Th and notably Th/∑REE isolate the signature of the Badain Juran desert and the combination of Sc/La and Y/Er that of the Taklamakan desert. The similarity in all trace and REE-based provenance tracers between the northern Qaidam basin and Tengger desert suggests that these two deposits may have a common aeolian source.     

Standing stocks and production rates of phytoplankton and abundance of bacteria in the Seto Inland Sea, Japan

Standing stocks and production rates of phytoplankton and abundance of bacteria were investigated at 39 stations in the Seto Inland Sea, Japan during four crulses in October 1993, January, April and June 1994. Primary productivity was measured by the¹³C tracer method. Photosynthetic rate varied from 0.41 to 32.1 μgC/1/h with an average value of 4.67 μgC/l/h. Annual primary production was estimated to be 218 gC/m²/year. Annual primary production in this study was 1.8 times as high as the values which were previously reported at same area. The reason for the disagreement between our primary production value and previous values is not thought to be due to the difference of methods used for measuring primary production or the different Chl.a concentrations but to the method of estimating the primary production in the euphotic zone from thein vitro measurements. The distribution of bacterial cells in surface seawater was examined during the same cruises. Bacterial cell density ranged from 0.32 to 3.4×10⁶ cells/ml. The density was relatively high in the eutrophic regions of Hiroshima Bay and Osaka Bay In addition, a high density of bacteria was also observed in an area within Suo Nada where Chl.a was relatively low. The disparity between Chla and bacterial density in Suo Nada suggests that bacterial abundance can be controlled by the availability of substrates other than phytoplankton exudate.     

Simple estimation of penetration rate of light in intertidal sediments

A simple estimation of light penetration in tidal flat sediments was developed using various sediment size fractions and their attenuation rate of irradiance. The attenuation coefficients of the sediment size fractions of 63–125, 125–250, 250–500, 500–1000 μm and 1000–2000 μm were 8.10, 4.08, 2.92, 2.12 and 1.44 mm⁻¹, respectively. Using the average attenuation coefficient of the particle size fractions in the sediment, the calculated attenuation coefficient agreed well with the actual attenuation coefficient. The method presented gives a photo-parameter to predict productivity in intertidal sediments, given only the particle size fraction.     

Decrease in anthropogenic nutrients and its effect on the C/N/P molar ratio of suspended particulate matter in hypertrophic Dokai Bay (Japan) in summer

Biologically important nutrient concentrations in Dokai Bay have declined as a result of reductions in anthropogenic inputs of total nitrogen and total phosphorus. A decrease in nutrient concentrations affects phytoplankton growth, thereby changing the biochemical characteristics of autochthonous particulate matter. We therefore investigated changes in the C/N/P molar ratio of suspended particulate matter (SPM) in the summer, when phytoplankton growth is vigorous, before environmental quality standards (EQSs) were attained (1995–1998) and afterward (2006–2009). We found that the ratio of particulate organic nitrogen (PON) to particulate phosphorus (PP) changed in conjunction with changes in the ratio of dissolved inorganic nitrogen to dissolved inorganic phosphorus (DIP) that resulted from reductions in nutrient loading. Furthermore, we suggest that because the DIP concentration in seawater was high before EQSs were attained, inorganic phosphorus was possibly adsorbed onto SPM. After the attainment of EQSs, however, the DIP concentration fell, and PON/PP was high. Phosphorus limitation of phytoplankton growth in the mouth of the bay may explain the high PON/PP ratios after EQS attainment.     

Density measurements of liquid Fe–Si alloys at high pressure using the sink–float method

The compositional dependence on the density of liquid Fe alloys under high pressure is important for estimating the amount of light elements in the Earth’s outer core. Here, we report on the density of liquid Fe–Si at 4 GPa and 1,923 K measured using the sink–float method and our investigation on the effect of the Si content on the density of the liquid. Our experiments show that the density of liquid Fe–Si decreases from 7.43 to 2.71 g/cm³ non-linearly with increasing Si content (0–100 at%). The molar volume of liquid Fe–Si calculated from the measured density gradually decreases in the compositional range 0–50 at% Si, and increases in the range 50–100 at% Si. It should be noted that the estimated molar volume of the alloys shows a negative volume of mixing between Fe and Si. This behaviour is similar to Fe–S liquid (Nishida et al. in Phys Chem Miner 35:417–423, 2008). However, the excess molar volume of mixing for the liquid Fe–Si is smaller than that of liquid Fe–S. The light element contents in the outer core estimated previously may be an underestimation if we take into account the possible negative value of the excess mixing volume of iron–light element alloys in the outer core.     

Classification of Japanese rivers by heavy metals in bottom mud

Bottom mud was collected from the upper and lower reaches of 92 rivers in Japan to determine the distribution of 0.5N-HCI-soluble heavy metals. The average concentrations of Cu, Zn, Pb, and Cd in the mud from the lower reaches were from two to three times higher than those in the upper reaches. Japanese rivers were classified according to the degree of heavy metal pollution by using the values of 0.5N-HCI-soluble metals in the lower reaches of rivers. The content of 0.5N-HCI-soluble heavy metals in the mud of the upper reaches was used as the standard value. The classification of rivers was made by a cluster analysis according to Euclidian distance. As a result, rivers in Japan could be classified into three groups based on the degree of metal pollution, and the classification was in agreement with the pollution index.