Comparison of central pit craters on Mars,Mercury, Ganymede,and the Saturnian satellites

We report on the first results of a large‐scale comparison study of central pit craters throughout the solar system, focused on Mars, Mercury, Ganymede, Rhea, Dione, and Tethys. We have identified 10 more central pit craters on Rhea, Dione, and Tethys than have previously been reported. We see a general trend that the median ratio of the pit to crater diameter (D_p/D_c) decreases with increasing gravity and decreasing volatile content of the crust. Floor pits are more common on volatile‐rich bodies while summit pits become more common as crustal volatile content decreases. Uplifted bedrock from below the crater floor occurs in the central peak upon which summit pits are found and in rims around floor pits, which may or may not break the surface. Peaks on which summit pits are found on Mars and Mercury share similar characteristics to those of nonpitted central peaks, indicating that some normal central peaks undergo an additional process to create summit pits. Martian floor pits do not appear to be the result of a central peak collapse as the median ratio of the peak to crater diameter (D_pk/D_c) is about twice as high for central peaks/summit pits than D_p/D_c values for floor pits. Median D_pk/D_c is twice as high for Mars as for Mercury, reflecting differing crustal strength between the two bodies. Results indicate that a complicated interplay of crustal volatiles, target strength, surface gravity, and impactor energy along with both uplift and collapse are involved in central pit formation. Multiple formation models may be required to explain the range of central pits seen throughout the solar system.     

Basalt–trachybasalt samples in Gale Crater,Mars

The ChemCam instrument on the Mars Science Laboratory (MSL) rover, Curiosity, observed numerous igneous float rocks and conglomerate clasts, reported previously. A new statistical analysis of single‐laser‐shot spectra of igneous targets observed by ChemCam shows a strong peak at ~55 wt% SiO₂ and 6 wt% total alkalis, with a minor secondary maximum at 47–51 wt% SiO₂ and lower alkali content. The centers of these distributions, together with the rock textures, indicate that many of the ChemCam igneous targets are trachybasalts, Mg# = 27 but with a secondary concentration of basaltic material, with a focus of compositions around Mg# = 54. We suggest that all of these igneous rocks resulted from low‐pressure, olivine‐dominated fractionation of Adirondack (MER) class‐type basalt compositions. This magmatism has subalkaline, tholeiitic affinities. The similarity of the basalt endmember to much of the Gale sediment compositions in the first 1000 sols of the MSL mission suggests that this type of Fe‐rich, relatively low‐Mg#, olivine tholeiite is the dominant constituent of the Gale catchment that is the source material for the fine‐grained sediments in Gale. The similarity to many Gusev igneous compositions suggests that it is a major constituent of ancient Martian magmas, and distinct from the shergottite parental melts thought to be associated with Tharsis and the Northern Lowlands. The Gale Crater catchment sampled a mixture of this tholeiitic basalt along with alkaline igneous material, together giving some analogies to terrestrial intraplate magmatic provinces.     

Origins of meteoritic nanodiamonds investigated by coordinated atom‐probe tomography and transmission electron microscopy studies

To constrain the origins of meteoritic nanodiamonds, the abundance ratios of stable C isotopes in acid residues from the carbonaceous chondritic meteorite Allende CV3 were measured using coordinated atom‐probe tomography (APT) and transmission electron microscopy (TEM). We combined our data with previously published APT data. A statistical analysis of this combined data set suggests an upper bound of 1 in 10² on the subpopulation that could have a large isotopic enrichment in ¹³C relative to ¹²C, consistent with the possible detection by secondary ion mass spectrometry of a similar enrichment in a 1 in 10⁵ fraction, abundant enough to account for the Xe‐HL anomalous isotopic component carried by the acid residues. Supernovae are believed to be the source of Xe‐HL, leading to the mystery of why all other supernova minerals do not carry Xe‐HL. The lack of Xe‐HL in low‐density disordered supernova graphite suggests that the isotopically anomalous component is the nanodiamonds, but the disordered C in the residue is not ruled out. We discuss possible origins of the disordered C and implications of our results for proposed formation scenarios for nanodiamonds. At least 99% of the meteoritic acid residue exhibits no unambiguous evidence of presolar formation, although production with solar isotope ratios in asymptotic giant branch stars is not ruled out. Comparison of TEM and APT results indicates that a minority of the APT reconstructions may preferentially sample disordered C rather than nanodiamonds. If this is the case, a presolar origin for a larger fraction of the nanodiamonds remains possible.     

Elemental abundance data for the Manitouwabing iron meteorite

Abstract The Manitouwabing meteorite whose trace constituents have not been previously quantified was analysed for Au, As, Ga, Ge, Ir, Ni, Os, Pd, Pt, Rh and Ru. Our data confirm that it belongs to subgroup IIIA of the IIIAB group and on the basis of the much higher concentrations of As, Ir, Os, Pt, Rh and Ru, it is not paired with Madoc as had previously been proposed.     

Modelling galaxy clustering by colour

We extend the mass-halo formalism for analytically generating power spectra to allow for the different clustering behaviour observed in galaxy subpopulations. Although applicable to other separations, we concentrate our methods on a simple separation by rest-frame colour into 'red' and 'blue' subpopulations through modifications to the 〈 N 〉( M ) relations and halo distribution functions for each of the subpopulations. This sort of separation is within the capabilities of the current generations of simulations as well as galaxy surveys, suggesting a potentially powerful observational constraint for current and future simulations. In anticipation of this, we demonstrate the sensitivity of the resulting power spectra to the choice of model parameters.     

3782 Celle: Discovery of a binary system within the Vesta family of asteroids

Photometric observations of the minor planet (3782) Celle, which has been associated both dynamically and spectroscopically with the Vesta asteroid family, were obtained using the 1.8-m Vatican Advanced Technology Telescope during September 2001 and December 2002-January 2003. Analysis of these data reveals a normal rotational lightcurve (, amplitude =0.10-0.15 mag). During the 2002-2003 run, anomalous attenuation events were observed lasting for about 2.6-3.5 h that varied in amplitude from 0.15-0.3 mag. The attenuations were of two distinct types that can clearly be identified as primary and secondary occultation/eclipses similar to those that have been previously observed in known minor planet binary systems (Pravec et al., 2000). We therefore interpret our data as clear evidence that (3782) Celle is actually an asynchronous binary system with an orbital period of (Ryan et al., 2003). A preliminary model, based on spherical components, yields a primary-to-secondary diameter ratio of 0.43±0.01 and a combined bulk density of for the two components. Because these objects are likely to be composed of basaltic fragments, this density is indicative of a moderate to a highly fractured internal structure for at least one, if not both, of the binary components. Since the Vesta family is believed to have been created via a cratering event, this finding has important implications for understanding possible ejecta re-accumulation and satellite formation in subcatastrophic collisions.     

Mineralogical characterization of Baptistina Asteroid Family: Implications for K/T impactor source

Bottke et al. [Bottke, W.F., Vokrouhlicky, D., Nesvorný, D., 2007. Nature 449, 48–53] linked the catastrophic formation of Baptistina Asteroid Family (BAF) to the K/T impact event. This linkage was based on dynamical and compositional evidence, which suggested the impactor had a composition similar to CM2 carbonaceous chondrites. However, our recent study [Reddy, V., Emery, J.P., Gaffey, M.J., Bottke, W.F., Cramer, A., Kelley, M.S., 2009. Meteorit. Planet. Sci. 44, 1917–1927] suggests that the composition of (298) Baptistina is similar to LL-type ordinary chondrites rather than CM2 carbonaceous chondrites. This rules out any possibility of it being related to the source of the K/T impactor, if the impactor was of CM-type composition. Mineralogical study of asteroids in the vicinity of BAF has revealed a plethora of compositional types suggesting a complex formation and evolution environment. A detailed compositional analysis of 16 asteroids suggests several distinct surface assemblages including ordinary chondrites (Gaffey SIV subtype), primitive achondrites (Gaffey SIII subtype), basaltic achondrites (Gaffey SVII subtype and V-type), and a carbonaceous chondrite. Based on our mineralogical analysis we conclude that (298) Baptistina is similar to ordinary chondrites (LL-type) based on olivine and pyroxene mineralogy and moderate albedo. S-type and V-type in and around the vicinity of BAF we characterized show mineralogical affinity to (8) Flora and (4) Vesta and could be part of their families. Smaller BAF asteroids with lower SNR spectra showing only a ‘single’ band are compositionally similar to (298) Baptistina and L/LL chondrites. It is unclear at this point why the silicate absorption bands in spectra of asteroids with formal family definition seem suppressed relative to background population, despite having similar mineralogy.     

Numerical simulations of catastrophic disruption: recent results

Numerical simulations have been used to study high velocity two-body impacts. In this paper a two-dimensional Lagrangian finite difference hydrocode and a three-dimensional smooth particle hydrocode (SPH) are described and initial results reported.

The 2D hydrocode has successfully reproduced both the fragment size distribution and the mean fragment velocities from laboratory impact experiments using basalt and cement mortar. Further, the hydrocode calculations have determined that the energy needed to fracture a body has a much stronger dependence on target size than predicted from most scaling theories. In addition, velocity distributions obtained (using homogeneous targets at impact velocities around 2 km s⁻¹) indicate that mean ejecta speeds resulting from large-body collisions do not generally exceed escape velocities.

The SPH model provides a fully three-dimensional framework for studying impacts, so that phenomena such as oblique collisions or impacts into non-spherical targets may be studied. The gridless code allows for arbitrary levels of distortion, and is hence appropriate for modeling the large-scale deformations which accompany most impact events. Because fragments are modeled explicitly, greater numerical accuracy is achieved in the regions of large fragments than with the purely statistical approach of the 2D model. Of course, this accuracy comes at the expense of significantly greater computational requirements.

These codes can be, and have been, used to make specific predictions about particular objects in our solar system. But more significantly, they allow us to explore a broad range of collisional events. Certain parameters (size, time) can be studied only over a very restricted range within the laboratory; other parameters (initial spin, low gravity, exotic structure or composition) are difficult to study at all experimentally. The outcomes of numerical simulations lead to a more general and accurate understanding of impacts in their many forms.     

Petrography and geochemistry of five new Apollo 16 mare basalts and evidence for post‐basin deposition of basaltic material at the site

Abstract— We present the petrography and geochemistry of five 2–4 mm basalt fragments from the Apollo 16 regolith. These fragments are 1) a high‐Ti vitrophyric basalt compositionally similar to Apollo 17 high‐Ti mare basalts, 2) a very high‐Ti vitrophyric basalt compositionally similar to Apollos 12 and 14 red‐black pyroclastic glass, 3) a coarsely crystalline high‐Al basalt compositionally similar to group 5 Apollo 14 high‐Al mare basalts, 4) a very low‐Ti (VLT) crystalline basalt compositionally similar to Luna 24 VLT basalts, and 5) a VLT basaltic glass fragment compositionally similar to Apollo 17 VLT basalts. High‐Ti basalt has been reported previously at the Apollo 16 site; the other basalt types have not been reported previously. As there are no known cryptomaria or pyroclastic deposits in the highlands near the Apollo 16 site (ruling out a local origin), and scant evidence for basaltic material in the Apollo 16 ancient regolith breccias or Apollo 16 soils collected near North Ray Crater (ruling out a basin ejecta origin), we infer that the basaltic material in the Apollo 16 regolith originated in maria near the Apollo 16 site and was transported laterally to the site by small‐ to medium‐sized post‐basin impacts. On the basis of TiO₂ concentrations derived from the Clementine UVVIS data, Mare Tranquillitatis (?300 km north) is the most likely source for the high‐Ti basaltic material at the Apollo 16 site (craters Ross, Arago, Dionysius, Maskelyne, Moltke, Sosigenes, Schmidt), Mare Nectaris/Sinus Asperitatis (?220 km east) is the most likely source for the low‐Ti and VLT basaltic material (craters Theophilus, Madler, Torricelli), and a large regional pyroclastic deposit near Mare Vaporum (?600 km northwest) is the most likely source region for pyroclastic material (although no source craters are apparent in the region).