Short-Period Waves That Heat the Corona Detected at the 1999 Eclipse

As a part of a study of the cause of solar coronal heating, we searched for high-frequency (1 Hz) intensity oscillations in coronal loops in the [Fexiv] coronal green line. We summarize results from observations made at the 11 August 1999 total solar eclipse from Râmnicu-Vâlcea, Romania, through clear skies. We discuss the image reduction and analysis through two simultaneous series of coronal CCD images digitized at 10 Hz for a total time of about 140 s. One series of images was taken through a 3.6 Å filter isolating the 5303 Å[Fexiv] coronal green line and the other through a 100 Å filter in the nearby K-corona continuum. Previous observations, described in Pasachoff et al. (2000), showed no evidence for oscillations in the [Fexiv] green line at a level greater than 2% of coronal intensity. We describe several improvements made over the 1998 eclipse that led to increased image clarity and sensitivity. The corona was brighter in 1999 with the solar maximum, further improving the data. We use Fourier analysis to search in the [Fexiv] channel for intensity oscillations in loops at the base of the corona. Such oscillations in the 1-Hz range are predicted as a result of density fluctuations from the resonant absorption of MHD waves. The dissipation of a significant amount of mechanical energy from the photosphere into the corona through this mechanism could provide sufficient energy to heat the corona. A Monte Carlo model of the data suggests the presence of enhanced power, particularly in the 0.75–1.0 Hz range, and we conclude that MHD waves remain a viable method for coronal heating.     

The ortho- to para- ratio of H2 in the starburst of NGC 253

We present measurements of several near-infrared emission lines from the nearby galaxy NGC 253. We have been able to measure four H₂ lines across the circumnuclear starburst, from which we estimate the ortho- to para- ratio of excited H₂ to be ∼2. This indicates that the bulk of the H₂ emission arises from photodissociation regions (PDRs), rather than from shocks. This is the case across the entire region of active star formation.
As the H₂ emission arises from PDRs, it is likely that the ratio of H₂ to Brγ (the bright hydrogen recombination line) is a measure of the relative geometry of O and B stars and PDRs. Towards the nucleus of NGC 253 the geometry is deduced to be tightly clustered O and B stars in a few giant H  II regions that are encompassed by PDRs. Away from the nuclear region, the geometry becomes that of PDRs bathed in a relatively diffuse ultraviolet radiation field.
The rotation curves of 1–0 S(1) and Brγ suggest that the ionized gas is tracing a kinetic system different from that of the molecular gas in NGC 253, particularly away from the nucleus.     

The Martian magnetic field

The magnetic field measurements of the Mars 2, 3 and 5 spacecraft have been interpreted by Dolginov and co-workers to be consistent with an intrinsic planetary magnetic moment of 2.5 × 10²² gauss cm³. They base this interpretation mainly on the apparent size of the obstacle responsible for deflecting the solar wind, the lack of dependence of the sign of the magnetic field in the wake region of the planet on the sign of the component of the interplanetary field radially out from the sun, and an apparent encounter of the Mars spacecraft with the planetary field. When examined in detail this evidence is very suspect. A detailed criticism of the arguments by Dolginov and co-workers for an intrinsic field has appeared elsewhere. Herein we summarize this criticism and present, in an appendix, a compendium of the Mars 3 and 5 magnetic field data transformed into a coordinate system in which the details of the interaction are more easily visualized. Many of these data have not been published in this form previously.     

Pleistocene climatic change in Southern Australia and its effect on speleothem deposition in some Nullarbor caves

Activity ratios of ²³⁴U/²³⁸U, ²³⁰Th/²³⁴U, and ²³⁰Th/²³²Th have been determined for calcite, gypsum and halite speleothems from caves of the Nullarbor Plain, mostly in the area N and NW of Mundrabilla Station, for the purpose of U-series dating. All calcite speleothems contain adequate amounts of uranium for dating, but some show an excess of ²³⁰Th. Stratigraphic relationships indicate that there were at least three phases of calcium carbonate deposition in the Nullarbor caves. The calcite samples, with one possible exception, have ages in excess of ca. 400000 yrs BP. This suggests that no significant amounts of calcium carbonate deposition have taken place during the last 400ka. At present, active deposition of speleothems is restricted almost entirely to gypsum and halite. The only gypsum speleothem dated was found to have a finite age of ca. 185 ka. Six dates on a small halite speleothem containing insect and arachnid remains indicate that it formed rapidly during Holocene time.     

Using Shoreline Video Assessment for coastal planning and restoration in the context of climate change in Kien Giang,Vietnam

Kien Giang, bordering Cambodia in the Mekong River Delta, is one of the two most vulnerable provinces in the region to coastal erosion and flooding. Coastal protection can conflict with current land use and economic development activities. The conditions of the mangrove forest and mainland coastline of the Kien Giang province were assessed using the Shoreline Video Assessment Method (SVAM) backed up with information from satellite images. Half of the 206 km Kien Giang coastline has been eroded or is being eroded. Protective mangrove forests naturally occurred in 74% of the coastline but have been under threat from illegal cutting, erosion and coastal retreat. Accurate information on the state of the coastline and mangrove forest health provided invaluable data for developing a new coastal rehabilitation plan to guard against future sea level rise. In contrast to the current boundary management of land and natural resources, this plan divided the provincial coastline into 19 sections based on the landscape condition and exposure to erosion. Priority strategic actions for erosion management, mangrove restoration and sustainable livelihood development for local communities for each section of coast were developed based on an integrated cross sectoral approach and practical experience in the Conservation and Development of the Kien Giang Biosphere Reserve Project.

     

Temporal Evolution of the Solar-Wind Electron Core Density at Solar Minimum by Correlating SWEA Measurements from STEREO A and B

The twin STEREO spacecraft provide a unique tool to study the temporal evolution of the solar-wind properties in the ecliptic since their longitudinal separation increases with time. We derive the characteristic temporal variations at ～?1 AU between two different plasma parcels ejected from the same solar source by excluding the spatial variations from our datasets. As part of the onboard IMPACT instrument suite, the SWEA electron experiment provides the solar-wind electron core density at two different heliospheric vantage points. We analyze these density datasets between March and August 2007 and find typical solar minimum conditions. After adjusting for the theoretical time lag between the two spacecraft, we compare the two density datasets. We find that their correlation decreases as the time difference increases between two ejections. The correlation coefficient is about 0.80 for a time lag of a half day and 0.65 for two days. These correlation coefficients from the electron core density are somewhat lower than the ones from the proton bulk velocity obtained in an earlier study, though they are still high enough to consider the solar wind as persistent after two days. These quantitative results reflect the variability of the solar-wind properties in space and time, and they might serve as input for solar-wind models.     

Using distributed temperature sensing (DTS) technology in acid gas injection design

The use of slickline distributed temperature sensing (SL-DTS) technology is becoming widespread due to its ease of operation and ability to acquire real-time multiple temperature traces inside the wellbore. Injection of treated acid gas (TAG)—a mixture of CO₂ and H₂S—into geologic formations has become an attractive technical and economic option for oil and gas producers and processors who are faced with regulations concerning excess sulfur and greenhouse gas emissions. Acid gas injection (AGI) into geologic formations is more economical and more flexible in dealing with varying TAG compositions than sulfur recovery units (SRUs) using the Claus process. SRUs do not achieve air quality standards and have high operation and maintenance costs. In addition, there is low demand for sulfur and sulfur disposal costs are high. The results of the analysis of SL-DTS data acquired in conjunction with step rate and pressure falloff (PFO) tests are presented in this paper. These tests were conducted to evaluate the injection potential of geologic formations. The injection zone consisted of a carbonate formation characterized by Karst features, vugs, and natural fractures. The SL-DTS data during the initial injection flow rate for the step rate test (SRT) indicated that high permeability zones accepted fluid at lower injection rates. An increasing number of discrete zones began to accept fluid as the injection rate was increased. The results of the SRT provided the fracture pressure of the formation. This information was used to design an AGI program that would avoid fracturing the formation while allowing for the required volume of TAG to be injected. The results of the PFO test provided information on the reservoir pressure and permeability and also indicated the presence of one or more hydraulic fractures. This case study of SL-DTS measurements made during a SRT and a PFO test for the design of an AGI well provides valuable insights into the potential of DTS technology and its use in AGI and carbon capture/sequestration (CCS) operations. Its findings could be applied to analyze injection potential of geological formations not only for AGI projects but also for CCS, and CO₂ enhanced oil recovery opportunities.     

Waters of the western springs catchment,Auckland

Abstract

Aquifers occur in basalt deposits infilling valleys in the Western Springs catchment of Auckland City, and they discharge into small streams incised along the edges of major lava flows. Total run‐off from the area is >0.261 m³·s^?1. Analyses by standard methods of twelve subsurface and surface waters show that flowing groundwaters have a low level of pollution (dissolved oxygen x = 7.6 mg·l^?1, abuminoid nitrogen x = 0.038 mg·l^?1, and total solids x = 188 mg·l^?1). Surface waters and stagnant groundwater have high, but varying levels of biological activity. Although much of the dissolved solid content of all the waters (e.g., Ca²⁺, Mg²⁺, Na⁺, K⁺, SiO₂) is consistent with the chemistry of the rocks of the catchment, particularly the glassy volcanic tuffs, for surface waters various sources of pollution also make significant contributions (e.g., leaking sewers, sewage overflows, combustion of fossil fuels, fertilisers, zoo animals). Apart from its iron level, the moderate volume (～.0.13 m³·s^?1) of flowing groundwater is of suitable quality for domestic, industrial and irrigation needs.