Using distributed temperature sensing (DTS) technology in acid gas injection design

The use of slickline distributed temperature sensing (SL-DTS) technology is becoming widespread due to its ease of operation and ability to acquire real-time multiple temperature traces inside the wellbore. Injection of treated acid gas (TAG)—a mixture of CO₂ and H₂S—into geologic formations has become an attractive technical and economic option for oil and gas producers and processors who are faced with regulations concerning excess sulfur and greenhouse gas emissions. Acid gas injection (AGI) into geologic formations is more economical and more flexible in dealing with varying TAG compositions than sulfur recovery units (SRUs) using the Claus process. SRUs do not achieve air quality standards and have high operation and maintenance costs. In addition, there is low demand for sulfur and sulfur disposal costs are high. The results of the analysis of SL-DTS data acquired in conjunction with step rate and pressure falloff (PFO) tests are presented in this paper. These tests were conducted to evaluate the injection potential of geologic formations. The injection zone consisted of a carbonate formation characterized by Karst features, vugs, and natural fractures. The SL-DTS data during the initial injection flow rate for the step rate test (SRT) indicated that high permeability zones accepted fluid at lower injection rates. An increasing number of discrete zones began to accept fluid as the injection rate was increased. The results of the SRT provided the fracture pressure of the formation. This information was used to design an AGI program that would avoid fracturing the formation while allowing for the required volume of TAG to be injected. The results of the PFO test provided information on the reservoir pressure and permeability and also indicated the presence of one or more hydraulic fractures. This case study of SL-DTS measurements made during a SRT and a PFO test for the design of an AGI well provides valuable insights into the potential of DTS technology and its use in AGI and carbon capture/sequestration (CCS) operations. Its findings could be applied to analyze injection potential of geological formations not only for AGI projects but also for CCS, and CO₂ enhanced oil recovery opportunities.     

Physical,chemical, and biological conditions associated with the early stages of the Lake Michigan vernal thermal front

An investigation of the thermal front in southeastern Lake Michigan during April 1988 revealed a dynamic physical, chemical, and biological environment. The front was observed approximately 4 km from the coast as a distinct gradient separating cold open-lake waters from warmer nearshore waters. Surface isotherms near the front were generally parallel to one another but skewed with respect to shore. Comparison between April 22 and 29 showed that the surface isothern pattern was modulated by wind stress. The pattern from April 29 showed signs of flow instabilities with horizontal scales of 1 km to 5 km. Surface drifter trajectories provided estimates of horizontal convergence at the fron which varied from 7×10^?6 s^?1 to 20×10^?6 s^?1. Inferred rates of downwelling, which ranged from 9.5 m d^?1 to 20.7 m d^?1, were sufficient to move a water parcel from the surface to the bottom in 2 to 6 d at the front. Convergent circulation was observed on both sampling dates despite contrasts in wind stress. Concentrations of chloride, soluble silica, and chlorophyll, which were always higher inshore, were 5% to 82% larger than offshore mean values. The aquatic environment just inshore of the thermal front was characterized by chlorphyll concentrations which exceeded 5.0 μg 1^?1 while concentrations offshore were between 1.0 μg 1^?1 and 2.0 μg 1^?1. A relatively uniform vertical structure in chlorophyll concentrations in the frontal zone was consistent with the observed convergence and inferred downwelling near the front.     

The red bed controversy revisited: shape analysis of Colorado Plateau units suggests long magnetization times

Several Triassic and earliest Jurassic sedimentary units from the Colorado Plateau region have distributions of virtual geomagnetic poles (VGPs) that are highly elongate along the path of apparent polar wander (APW). This suggests that the remanent magnetizations measured in these units were acquired over an extended period of time, possibly approaching 35 m.y., and are not precisely coeval with the stratigraphic age of the rock. Comparison with other paleomagnetic studies shows that the observed elongation is not a general attribute of the age of the rock, nor is it related to paleolatitude. The rocks that yield elongate VGP distributions are dominantly red to brown mudstones, and it is possible that their remanence is dominated by a slowly acquired chemical remanent magnetization, as suggested by Larson et al. [J. Geophys. Res. 87 (1982) 1081] and other authors. However, several superficially similar units from the Colorado Plateau have nearly circular VGP distributions. The process by which remanence is acquired in clastic sedimentary rocks merits further study.     

Use of clast shape in determining the sedimentary history of the late devonian keepit conglomerate,Australia

Clasts of the Late Devonian Keepit Conglomerate of northeastern New South Wales, Australia, are predominantly andesites of isotropic nature that lack any apparent initial shape controls. Given adequate time in a particular environment, these clasts could be reasonably expected to develop shapes characteristic of abrasion within that environment.Clasts from both fluvial and marine resedimented conglomerates of the Keepit Conglomerate possess shape characteristics indicative of shaping within a fluvial environment. Maximum projection sphericity, and a plot of sphericity against either the oblate-prolate index or the flatness parameter C/A, were the most useful in indicating fluvial shaping processes. In addition, the $\text{OP}$ Index and the dominant form classes of the Sneed and Folk Sphericity-Form diagram were in support of a fluvial history for the clasts.The occurrence of clasts exhibiting typical fluvial shapes in marine resedimented conglomerates indicates a lack of time and/or insufficient energy in a beach environment for reshaping of the clasts prior to resedimentation into deeper-water submarine-fan environments. This interpretation is consistent with and lends support to the interpretation, based on all other available data, for the Keepit Conglomerate of a history of rapid progradation of fluvial gravels into a relatively low-energy coastline environment, with periodic resedimentation of coarse sediment into deeper water.     

Single-crystal x-ray diffraction of brucite to 14 GPa

Single-crystal brucite, Mg(OH)₂, was studied to 14 GPa in a quasi-hydrostatic pressure medium using a diamond anvil cell and energy-dispersive synchrotron x-ray diffraction. The parameters of a third-order Birch-Murnaghan equation of state fit to the data are: K _OT=42(2) GPa, and (?K _OT/?P)_T= 5.7(5). The bulk modulus is significantly lower than that obtained in recent shock compression and powder x-ray diffraction experiments under non-hydrostatic conditions. No evidence was found for a transition involving the Mg -O sub-structure over the pressure range of these experiments. This implies that the structural change previously identified at high pressure by Raman spectroscopy probably involves rearrangement of hydrogen atoms, leaving the Mg — O substructure largely unaffected.     

Coleopteran evidence for a mosaic of environments at high altitude in the eastern Pyrénées,France, during the climatic transition between the Allerød and Younger Dryas

Late‐glacial environmental and climatic implications are inferred from an insect fauna from organic sediments infilling a palaeochannel on the banks of the River Têt, eastern Pyrénées, France. A pine cone in association with the insect fauna has been radiocarbon dated to 10 920 ± 60 yr BP, namely close to the Allerød – Younger Dryas boundary. Two distinct insect associations appear to be recognisable here. One is an assemblage typical of the high altitude forest and a second is characteristic of an alpine grassland. The close coexistence of these two assemblages is attributed to the climatic cooling towards the start of the Younger Dryas Stadial, when the forest cover broke up into remnant patches interspersed by alpine grassland. It is suggested that in a region of such high relief a mosaic of habitats may have been caused by patchy differences in insolation aspect, especially during a period of climatic deterioration. Copyright © 1999 John Wiley & Sons, Ltd.     

Analytical derivation of water retention for random monodisperse granular media

The mechanics of water retention in unsaturated granular media is of critical importance to a broad range of disciplines including soil science, geotechnical engineering, hydrology and agriculture. Fundamental to water retention is the relationship between degree of saturation and suction, referred to as the water retention curve (WRC). The majority of WRC models are empirically based and seldom incorporate physically meaningful parameters. This study presents an analytical model for the WRC that considers separate contributions from fully filled pores and partially filled pores containing liquid bridges. A recently established unique k-gamma pore volume distribution function for randomly assembled monodisperse granular materials is adopted to determine the contributions of fully filled pores. Calculation of the contribution of residual pore water retained in partially filled pores is undertaken by representing pores as individual cells shaped as platonic shapes of various sizes and determining the volume of all liquid bridges suspended between particles within the pore cells. Weighting factors for the various cell types are obtained from the pore volume distribution to determine the relative contribution of different pore cell geometries to the total residual pore water. The combined model accurately describes experimental data for monodisperse spherical glass beads for both wetting and drying, even though the underlying assumptions do not reflect exactly the complex, interconnected and highly irregular geometry of the pore space. A single parameter provides the lateral shift between the wetting and drying curves. The results of this study provide a geometric understanding of the mechanisms of water retention in granular media.     

On the linear elastic responses of the 2D bonded discrete element model

The bonded discrete element model (DEM) is a numerical tool that is becoming widely used when studying fracturing, fragmentation, and failure of solids in various disciplines. However, its abilities to solve elastic problems are usually overlooked. In this work, the main features of the 2D bonded DEM which influence Poisson's ratio and Young's modulus, and accuracy when solving elastic boundary value problems, are investigated. Outputs of numerical simulations using the 2D bonded DEM, the finite element method, a hyper elasticity analysis, and the distinct lattice spring model (DLSM) are compared in the investigation. It is shown that a shear interaction (local) factor and a geometric (global) factor are two essential elements for the 2D bonded DEM to reproduce a full range of Poisson's ratios. It is also found that the 2D bonded DEM might be unable to reproduce the correct displacements for elastic boundary value problems when the represented Poisson's ratio is close to 0.5 or the long-range interaction is considered. In addition, an analytical relationship between the shear stiffness ratio and the Poisson's ratio, derived from a hyper elasticity analysis and applicable to discontinuum-based models, provides good agreement with outputs from the 2D bonded DEM and DLSM. Finally, it is shown that the selection of elastic parameters used the 2D bonded DEM has a significant effect on fracturing and fragment patterns of solids.     

A revised evolutionary history of armadillos (Dasypus) in North America based on ancient mitochondrial DNA

The large, beautiful armadillo, Dasypus bellus, first appeared in North America about 2.5 million years ago, and was extinct across its southeastern US range by 11 thousand years ago (ka). Within the last 150 years, the much smaller nine‐banded armadillo, D. novemcinctus, has expanded rapidly out of Mexico and colonized much of the former range of the beautiful armadillo. The high degree of morphological similarity between these two species has led to speculation that they might be a single, highly adaptable species with phenotypical responses and geographical range fluctuations resulting from environmental changes. If this is correct, then the biology and tolerance limits for D. novemcinctus could be directly applied to the Pleistocene species, D. bellus. To investigate this, we isolated ancient mitochondrial DNA from late Pleistocene‐age specimens of Dasypus from Missouri and Florida. We identified two genetically distinct mitochondrial lineages, which most likely correspond to D. bellus (Missouri) and D. novemcinctus (Florida). Surprisingly, both lineages were isolated from large specimens that were identified previously as D. bellus. Our results suggest that D. novemcinctus, which is currently classified as an invasive species, was already present in central Florida around 10 ka, significantly earlier than previously believed.