Climate changes during the last glacial termination inferred from diatom-based temperatures and pollen in a sediment core from Längsee (Austria)

A sediment core section from Längsee, a small meromictic lake in the southern Alpine lowland (Carinthia, Austria) close to the Würmian ice margin, was investigated by means of diatoms and pollen. The main aims of the study were to reconstruct water temperature as a signal of climate change during the last glacial termination, compare the aquatic and terrestrial response to the changing climate, and place our findings into a climatic frame on the northern hemispheric scale. A calibration data set (ALPS06) of 116 lakes was constructed using data from newly studied lakes and from two previously published data sets and we established a transfer function for predicting summer epilimnetic water temperatures (SEWT). A locally weighted weighted average regression and calibration model (R _jack ²  = 0.89; RSMEP = 1.82°C) was applied to the fossil diatom assemblages in order to reconstruct SEWT. Three major sections were distinguished in the time window of approximately 19–13 cal ka BP, which fitted well with the oxygen isotope curve and the isotope-event stratigraphy from the Greenland ice-core GRIP. The first section was a warming period (SEWT range from 11.6 to 18.0°C; average 15.8°C = ca. 6°C below present) called the Längsee oscillation, which probably correlates with the warmer sub-section (GS-2b) of the Greenland Stadial 2. The subsequent section represents a climate cooling, called the Längsee cold period (SEWT range between 10.6 and 15.9°C; average 12.9°C), which probably corresponds with the sub-section GS-2a of the Greenland Stadial 2, the Heinrich 1 cold event of the North Atlantic, and partially the Gschnitz Stadial in the Alps. The Längsee cold period shows a tri-partition: Two colder phases are separated by a warmer inter-phase. The passive ordination of the core sample scores along maximum water depth indicated that the Längsee cold period was drier than the Längsee oscillation. Strong short-term fluctuations during the Längsee oscillation and the Längsee cold period indicate climate instability. The third section represented climate warming during the Längsee late glacial interstadial (=Greenland Interstadial 1, GI-1) with an average SEWT of 17.5°C. From the minor climatic fluctuations during this interstadial, mainly indicated by pollen, the fluctuation most likely related to the Gerzensee oscillation showed a SEWT decline. During the early immigration and expansion period of shrubs and trees, aquatic and terrestrial records showed distinct discrepancies that might have arose because of time lags in response and differences in sensitivity.     

Pyrolysis of Huadian oil shale by electrical heating on different heating rates

The electrical heating experiments on oil shale sample from Huadian of Jilin were carried out by the pyrolysis method at three different heating rate 2℃/ min,5℃/ min and 10℃/ min in the temperature range of 30℃-750℃ . Heating rate 2℃/ min is considered low,while intermediate one covers the range 5℃/ min and high heating rate is 10℃/ min. The controlling parameters studied were the final pyrolysis temperature and the influence of the heating rate as well as type. The heating rate has an important effect on the pyrolysis of oil shale and the amount of residual carbon obtained therefore. It is found that increasing the heating rate and pyrolysis temperature also increases the production of oil and the total weight loss. Higher heating rates resulted in higher rates of accumulation. The rate of oil and water collection passed through the maximum of different heating rates at different pyrolysis temperatures. Heating rate affected density,oil conversion and oil yield.     

Disentangling late-Holocene climate and land use impacts on an Austrian alpine lake using seasonal temperature anomalies,ice-cover,sedimentology, and pollen tracers

Major and trace elements, minerals and grain-size were analysed from a sediment core covering the last 4,000 years of an Austrian Alpine lake (Oberer Landschitzsee, ObLAN, 2,076 m a.s.l.). These analyses were combined with autumn and spring temperature anomalies and ice-cover estimated from a diatom and chrysophyte cyst, thermistor-based regional calibration dataset and selected pollen markers published previously. Diatom-inferred pH (Di-pH) and DOC (Di-DOC) completed the multi-proxy approach, which, together with ordination techniques (PCA and RDA), helped (1) to confirm proposed climatic patterns and hypotheses, and (2) to disentangle the complex interactions between climatic and anthropogenic impacts. Shifts in chemical and physical weathering, erosion, production, lake stratification, redox potentials and air pollution were the major processes that have affected Oberer Landschitzsee in relation to climate, lake/catchment interactions, and human impact. Geochemistry supported the finding that the four waves of high-altitude land use (Early to Middle Bronze, ca. 1,800–1,300 B.C.; Late Bronze to Hallstatt, ca. 1,000–500 B.C.; Celtic to Roman, ca. 300 B.C.–400 A.D.; and Medieval, ca. 1,000–1,600 A.D.) were coupled mainly with warm periods. Increased production, onset of lake stratification, and the deterioration of hypolimnetic oxygen conditions were the major changes governing in-lake processes during climate warming. They resulted in specific element assemblages associated with organic matter accumulation (Br), oxygen depletion (As, Ga, Cu, S), and changes in redox (Fe/Mn). The Se/Di-DOC ratio was introduced to track shifts between in-lake production and allochthonous sources. Nutrient loading from pastures, coupled with climate warming, could explain that in-lake production was highest during Roman and Medieval land use. Lithogenic elements mainly originated from chemical weathering of silicate bedrock and they increased when intense land-use was coupled with climate deterioration and/or increased humidity. These perturbations were highest during a High Medieval climate fluctuation around 1,000 A.D. The association of sand with LOI and C/N and the decoupling of sand from quartz and feldspar separates erosion from physical weathering. Di-DOC, S, and C/N showed hybrid characters in relation to climate and human impact. The mineral proportions indicated gradients in relation to weathering, snow-cover and running waters, as well as vegetation. Air pollution by metallurgic industries, starting during the High Medieval and culminating during the Late Medieval, caused lead accumulation and could have contributed to As and S enrichment. Corresponding features in the distribution of selected elements and pollen tracers, as well as changes in mineral proportions, supported the hypotheses of shifts in seasonal climate and an overall trend towards more continental climate conditions since Medieval times.     

A lost Tethyan evaporitic basin: Evidence from a Cretaceous hemipelagic meta‐selenite – red chert association in the Eastern Mediterranean realm

Ancient evaporite deposits are geological archives of depositional environments characterized by a long‐term negative precipitation balance and bear evidence for global ocean element mass balance calculations. Here, Cretaceous selenite pseudomorphs from western Anatolia (‘Rosetta Marble’) — characterized by their exceptional morphological preservation — and their ‘marine’ geochemical signatures are described and interpreted in a process‐oriented context. These rocks recorded Late Cretaceous high‐pressure/low‐temperature, subduction‐related metamorphism with peak conditions of 1·0 to 1·2 GPa and 300 to 400°C. Metre‐scale, rock‐forming radiating rods, now present as fibrous calcite marble, clearly point to selenitic gypsum as the precursor mineral. Stratigraphic successions are recorded along a reconstructed proximal to distal transect. The cyclical alternation of selenite beds and radiolarian ribbon‐bedded cherts in the distal portions are interpreted as a two type of seawater system. During arid intervals, shallow marine brines cascaded downward into basinal settings and induced precipitation. During more humid times, upwelling‐induced radiolarian blooms caused the deposition of radiolarite facies. Interestingly, there is no comparable depositional setting known from the Cenozoic world. Meta‐selenite geochemical data (δ¹³C, δ¹⁸O and ⁸⁷Sr/⁸⁶Sr) plot within the range of reconstructed middle Cretaceous seawater signatures. Possible sources for the ¹³C‐enriched (mean 2·2‰) values include methanogenesis, gas hydrates and cold seep fluid exhalation. Spatially resolved component‐specific analysis of a rock slab displays isotopic variances between meta‐selenite crystals (mean δ¹³C 2·2‰) and host matrix (mean δ¹³C 1·3‰). The Cretaceous evaporite‐pseudomorphs of Anatolia represent a basin wide event coeval with the Aptian evaporites of the Proto‐Atlantic and the pseudomorphs share many attributes, including lateral distribution of 600 km and stratigraphic thickness of 1·5 to 2·0 km, with the evaporites formed during the younger Messinian salinity crisis. The Rosetta Marble of Anatolia may represent the best‐preserved selenite pseudomorphs worldwide and have a clear potential to act as a template for the study of meta‐selenite in deep time.     

Influence of root characteristics and soil variables on the uprooting mechanics of Avena sativa and Medicago sativa seedlings

The success of seedlings and rejuvenated woody debris growing on river bedforms depends on the resistance to uprooting by flow provided by their simple root architecture. Avena sativa and Medicago sativa seedlings were used in flume experiments as prototypes for juvenile riparian plants. Very little is known about the magnitude of root anchoring forces and the role of secondary roots of such simple root systems. We performed 1550 vertical uprooting experiments on Avena sativa and Medicago sativa seedlings grown in quartz sand. Seedlings were pulled up by direct traction using a wheel driven by a computer‐controlled motor and the force was recorded. Roots were scanned and architectural parameters (root length and number of roots) determined. Uprooting force and work (the integral of the applied force times the distance over which it is applied) were then related to root architecture and soil variables. Resistance to uprooting increased with decreasing sediment size and sediment moisture content. The initial response of the root–soil system to uprooting showed linear elastic behaviour with modulus increasing with plant age. While the maximum uprooting force was found to increase linearly with total root length and be mainly dependent on the length of the main root, uprooting work followed a power law and has to be related to the whole root system. Thus, for the young plants we considered, secondary roots are responsible for the ability to withstand environmental disturbances in terms of duration rather than magnitude. This distinction between primary and secondary roots can be of crucial importance for seedlings of riparian species germinating on river bars and islands where inundation is a main cause of mortality. Beyond clarifying the biomechanical role of soil and root variables, the uprooting statistics obtained are useful in interpreting and designing ecomorphodynamic flume experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

On the developments of spectral wave models: numerics and parameterizations for the coastal ocean

The development of numerical wave models for coastal applications, including coupling with ocean circulation models, has spurred an ongoing effort on theoretical foundations, numerical techniques, and physical parameterizations. Some important aspects of this effort are reviewed here, and results are shown in the case of the French Atlantic and Channel coast using version 4.18 of the WAVEWATCH III ^R model. Compared to previous results, the model errors have been strongly reduced thanks to, among other things, the introduction of currents, coastal reflection, and bottom sediment types. This last item is described here for the first time, allowing unprecedented accuracy at some sites along the French Atlantic Coast. The adequate resolution, necessary to represent strong gradients in tidal currents, was made possible by the efficiency brought by unstructured grids. A further increase in resolution, necessary to resolve surf zones and still cover vast regions,will require further developments in numerical methods.     

An algorithm to classify and monitor seasonal variations in vegetation phenologies and their inter-annual change

The algorithm presented in this paper classifies vegetation from annual Normalized Difference Vegetation Index (NVDI) time series according to the shape of the temporal cycle. Shape is described using the Fourier components’ magnitude and phase. The degree of an NDVI cycle’s similarity to a predefined reference cycle is measured by the similarity in their amplitude ratios and in their phase differences. Tolerable deviations from the ideal ratios and differences can be set by the user depending on individual accuracy requirements. Tolerable vegetation coverage variation within a shape class is another user defined variable. The algorithm is invariant to cycle modifications including temporal shifts, vertical displacements, and intensity variations, modifications that may be caused by differences in climate, soil (-type, -water, -fertility), or topography, but are unrelated to the vegetation type. The output is a highly consistent clustering of NDVI cycles according to their shapes, which can be linked to distinct vegetation types or land use practices. Intra-class coverage variations in the form of continuous fields measured relative to the reference cycle provide additional information about vegetation covers. Based on the same principles, inter-annual vegetation changes can be monitored with the possibility to distinguish between coverage fluctuations and phenological variations/changes.The algorithms are independent from scene statistics and can be used to create spatially and temporally comparable classifications. Their potential is demonstrated using a 250 m MODIS NDVI time series (version 4) from the Middle East.     

Chemical Characterisation of NIST Silicate Glass Certified Reference Material SRM 610 by ICP-MS, TIMS, LIMS, SSMS, INAA, AAS and PIXE

National Institute of Science and Technology (NIST) silicate glass SRM 610 is widely used as a certified reference material for various micro-analytical techniques such as SIMS or laser ablation ICP-MS. SRM 610 has been nominally doped with sixty one trace elements at the 500 μg g⁻¹ level, but certified concentration data exist for only a few of these elements. This study reports concentration data for fifty nine trace elements obtained by ICP-MS, SSMS, LIMS, TIMS, INAA, AAS, and PIXE analyses of two different SRM 610 wafers. Most elements fall within a 10% band around a median value of about 440 μg g⁻¹. The REE concentrations are shown to be constant to 3% (1 σ), thus emphasizing the value of SRM 610 as a reference material for REE analyses.
Comparison of our values with published data suggests that different SRM 610 wafers are, within errors, chemically identical for most elements. Exceptions to this general rule appear to be restricted to elements which were partly lost during the production of the glass, e.g. Ag and Br. On the basis of six independent determinations of Rb concentrations, which are systematically lower by a few percent than the reported NIST value, we argue that the certified Rb concentration may not be representative for all distributed SRM 610 wafers.