Sediment origin and budget in Sepetiba Bay (Brazil) - an approach based on multielemental analysis

 Sediment origin and transport were determined in a shallow 447 km² coastal lagoon in Brazil, using the distribution of major elements in bottom and suspended sediments. Applying multivariate analysis, the sum of normalized concentrations of Ti, Fe, and Al in sediments was selected to trace the terrigenous influence in bottom sediments, whereas Ca, Si, and K were used as indicators of marine influence. Sepetiba Bay bottom sediments are dominated by up to 80% terrigenous inputs. The open bay sediments are enriched in P, Mg, K, and Ca because of the intensive water column primary production. The inner bay forms an independent circulation cell with a predominance of terrigenous sediments. The results suggest a long residence time for particles in the bay, demonstrated by the magnitude of resuspension flux compared to the total sediment input to the bay. Received: 29 May 1996 · Accepted: 17 December 1996     

Disequilibrium for Ca during growth of pelitic garnet

Compositional zoning in hundreds of almandine-rich garnets in amphibolite by facies micaceous quartzites from the Picuris Range, north-central New Mexico USA, indicates that although Mn, Mg and Fe achieve chemical equilibrium at hand-sample scale during garnet growth, Ca does not. Instead, Ca concentrations at the surface of growing garnets appear to depend strongly on kinetic factors that govern the local chemical environment, yielding disequilibrium for Ca at scales larger than the region immediately surrounding an individual porphyroblast. Detailed zoning profiles were obtained for 371 garnet crystals in a small volume of a single sample of garnetiferous quartzite, and core analyses were made of 97 additional crystals. Each analysis was made on a section that passed precisely through the morphological centre of the crystal, located by means of 3-D imagery from computed X-ray tomography. The data reveal strong correlations between crystal size and concentrations of Mn, Mg and Fe (but not Ca) in garnet cores; a relationship between crystal size and isolation; rigorous cross-correlations among concentrations of Mn, Mg and Fe (but not Ca); and systematic variations in Ca concentrations as a function of crystal size and core composition that are anomalous in comparison to the behaviour of the other divalent cations. We interpret these observations as the result of thermally accelerated diffusion-controlled garnet growth, in circumstances that promoted rapid intergranular diffusion and thus rock-wide equilibration of Mn, Mg and Fe, but that prevented equilibration at similar scale for Ca because of its more sluggish intergranular diffusion. The anomalous behaviour of Ca is made evident in these garnets by the presence of sharp spikes in Ca concentration, which are demonstrably not a consequence of any simultaneous rock-wide event, such as a change in pressure, temperature, or some other intensive parameter. Instead, Ca concentrations probably reflect the local extent of reaction in the immediate vicinity of each porphyroblast. To the degree that such kinetic factors introduce departures from chemical equilibrium for Ca, thermobarometric estimates that involve grossular contents of pelitic garnet will be in error.     

Two stages of zircon and monazite growth in anatectic leucogneiss: SHRIMP constraints on the duration and intensity of Pan-African metamorphism in Prydz Bay, East Antarctica

SHRIMP U–Pb data from two samples of foliated anatectic leucogneiss bracket the high-grade metamorphic history of metasediments from southern Prydz Bay, East Antarctica. Magmatic zircons in these two samples have mean crystallization ages of 535 ± 13 and 536 ± 35 Myr, and provide a good estimate for the timing of peak metamorphism and partial melting. Low-Th monazite grains in the same samples have mean ages of 528 ± 4 and 527 ± 11 Myr, which are within error of the zircon ages but may reflect a lower blocking temperature. High-Th monazite rims with younger mean ages of 518 ± 3 and 512 ± 13 Myr occur around low-Th cores in both samples, and were precipitated from hydrous fluids released during the crystallization of residual melts. These magmatic fluids were channelled along the retrograde foliation present in both samples. All mineral assemblages and fabrics preserved in the metasediments reflect intense Pan-African metamorphism and deformation, associated with high degrees of partial melting and significant vertical displacements of the crust. Continental reconstructions assuming limited Pan-African tectonism in East Antarctica should be reassessed in the light of these new data.     

Elasticity of tetragonal end-member majorite and solid solutions in the system Mg4Si4O12-Mg3Al2Si3O12

 The adiabatic elastic moduli of polycrystalline En₅₀Py₅₀ and En₈₀Py₂₀ majorite-garnet solid solutions (where En=4MgSiO₃, Py=Mg₃Al₂Si₃O₁₂) and the end-member En₁₀₀ tetragonal majorite were determined at ambient conditions using Brillouin spectroscopy. The adiabatic bulk modulus, K, and shear modulus, μ, of En₅₀Py₅₀ were found to be K=173.1 (20) and μ=92.3 (10) GPa, and are indistinguishable from those of the end-member pyrope, Py₁₀₀. The moduli of the more majorite-rich samples are significantly lower and are virtually identical to each other (K=162.6(11) and μ=85.7(7) for En₈₀Py₂₀; K=166(5) and μ=88(2) for En₁₀₀). In combination with previously reported moduli for this system, we conclude that both K and μ are constant over the compositional range from Py₁₀₀ to a majorite content of about 70–80%, whereupon the moduli decrease substantially. For compositions ranging from En₈₀Py₂₀ to the end-member majorite, the moduli are also approximately independent of composition, but at a lower value. An alternative model with a continuous decrease in moduli with increasing majorite content cannot be excluded, within the uncertainties of existing measurements. The contrast in moduli between aluminous pyrope garnet and Al-free majorite are small compared with the modulus changes accompanying the pyroxene – majorite phase transformation. Received August 16, 1995 /Revised, accepted January 12, 1996     

中国汽车工业──改革开放后的重整与国际化

大规模的重整和广泛的国际化是改革开放后中国汽车工业发展的两个主要特征。作者首先从企业组织结构、生产能力与品种结构、规模经济和空间分布等四个方面分析了近二十年来中国汽车工业重整的效果及所形成的行业特征;其次根据利用的外资和技术的来源以及涉及的技术形态分析了其国际化的程度及在世界汽车工业中的位置;最后总结了中国汽车工业面临的若干问题,并提出在散乱的格局和跨国公司竞争的双重压力下,中国汽车工业正处于成长的关键时期。     

Past imperfect, future tense: Archaeology and development

Archaeological sites are valuable nonrenewable resources and they are being destroyed rapidly by modern development projects of all kinds, worldwide. The contextual information in these sites could tell surprising and valuable stories of human behavior over an enormous sweep of time and might contribute to a better future. Archaeologists’ experience of site destruction and their recent efforts to work with local communities toward alternatives to site destruction may offer examples for others concerned with the treatment of nonrenewable resources     

NEGOTIATING DUALISMS: WOMEN, LOCALITY AND EMPLOYMENT OPPORTUNITIES IN OAXACA CITY, MEXICO

This paper examines the validity of the public/private and reproductive/productive dichotomies commonly adopted in the analysis of gender and employment. It considers three aspects of the dualisms: spatial division, activity patterns and the construction of identities. The discussion is based on fieldwork undertaken in three districts of Oaxaca City, Mexico, between 1992 and 1995. While recognising the usefulness of spatial dualisms within Mexican cities, the paper seeks to identify the ways in which class and location within the urban space affect the construction of the boundary between “public” and “private”, women's “employment” experiences, and women's identities.     

Deconvolution of teleseismic recordings for mantle structure

Delineation of detailed mantle structure frequently requires the separation of source signature and structural response from seismograms recorded at teleseismic distances. This deconvolution problem can be posed in a log-spectral domain where the operation of time-domain convolution is reduced to an additive form. The introduction of multiple events recorded at many stations leads to a system of consistency equations that must be honoured by both the source time functions and the impulse responses associated with propagation paths between sources and receivers. The system is inherently singular, and stabilization is accomplished through the supply of an initial estimate of the source time function. Although alternative choices exist, an effective estimate is derived from the eigenimage associated with the largest eigenvalue in a singular-value decomposition of the suite of aligned seismograms corresponding to a given event. The relation of the deconvolution scheme to simultaneous least-squares deconvolution is examined. Application of the methodology to broadband teleseismic P waveforms recorded on the Canadian National Seismograph Network demonstrates the retrieval of effective Green's functions including secondary phases associated with upper-mantle structure.     

Source investigation of a small event using empirical Green's functions and simulated annealing

We propose a two-step inversion of three-component seismograms that (1) recovers the far-field source time function at each station and (2) estimates the distribution of co-seismic slip on the fault plane for small earthquakes (magnitude 3 to 4). The empirical Green's function (EGF) method consists of finding a small earthquake located near the one we wish to study and then performing a deconvolution to remove the path, site, and instrumental effects from the main-event signal.
The deconvolution between the two earthquakes is an unstable procedure: we have therefore developed a simulated annealing technique to recover a stable and positive source time function (STF) in the time domain at each station with an estimation of uncertainties. Given a good azimuthal coverage, we can obtain information on the directivity effect as well as on the rupture process. We propose an inversion method by simulated annealing using the STF to recover the distribution of slip on the fault plane with a constant rupture-velocity model. This method permits estimation of physical quantities on the fault plane, as well as possible identification of the real fault plane.
We apply this two-step procedure for an event of magnitude 3 recorded in the Gulf of Corinth in August 1991. A nearby event of magnitude 2 provides us with empirical Green's functions for each station. We estimate an active fault area of 0.02 to 0.15 km² and deduce a stress-drop value of 1 to 30 bar and an average slip of 0.1 to 1.6 cm. The selected fault of the main event is in good agreement with the existence of a detachment surface inferred from the tectonics of this half-graben.