Period changes in the pulsating extreme helium stars V652 Her and BX Cir

A new statement of the eigenvalue problem of studying small perturbations in arbitrary integrable self-gravitating systems is presented. An example of such a system, a 2D stellar disc, is considered in detail. The theory, based on the general equation for disc eigenmodes, reveals mechanisms for the formation and growth of global galactic structures. This new point of view specifies the limits of the unified theory of bar-like and spiral modes that was based on the assumption that global galactic structures could be understood in terms of low-frequency disc modes.     

The Preboreal climate reversal and a subsequent solar‐forced climate shift

Accurate chronologies are essential for linking palaeoclimate archives. Carbon‐14 wiggle‐match dating was used to produce an accurate chronology for part of an early Holocene peat sequence from the Borchert (The Netherlands). Following the Younger Dryas–Preboreal transition, two climatic shifts could be inferred. Around 11 400 cal. yr BP the expansion of birch (Betula) forest was interrupted by a dry continental phase with dominantly open grassland vegetation, coeval with the PBO (Preboreal Oscillation), as observed in the GRIP ice core. At 11 250 cal. yr BP a sudden shift to a humid climate occurred. This second change appears to be contemporaneous with: (i) a sharp increase of atmospheric ¹⁴C; (ii) a temporary decline of atmospheric CO₂; and (iii) an increase in the GRIP ¹⁰Be flux. The close correspondence with excursions of cosmogenic nuclides points to a decline in solar activity, which may have forced the changes in climate and vegetation at around 11 250 cal. yr BP. Copyright © 2004 John Wiley & Sons, Ltd.     

Water release patterns of heated speleothem calcite and hydrogen isotope composition of fluid inclusions

Speleothem fluid inclusions are a potential paleo-precipitation proxy to reconstruct past rainwater isotopic composition (δ¹⁸O, δD). To get a better insight in the extraction of inclusion water from heated speleothem calcite, we monitored the water released from crushed and uncrushed speleothem calcite, heated to 900 °C at a rate of 300 °C/h, with a quadrupole mass spectrometer. Crushed calcite released water in three not well individualised peaks between 25 and 360 °C, 360 and 650 °C and between 650 and 800 °C while uncrushed calcite released water in two distinct temperature intervals: between 25 and 550 °C and between 550 and 900 °C.Water from two speleothems from the Han-sur-Lesse cave was recovered using three different techniques: i) the crushing and heating to 360 °C technique, ii) the decrepitation by heating to 550 °C and iii) the decomposition by heating to 900 °C technique. Measurements of the δD of water recovered by the decomposition of Han-sur-Lesse calcite heated to 900 °C did not show a 20 to 30‰ offset as found by previous authors. However a difference of 7‰ was observed between water released before and after decomposition of the calcite. Water recovery from the Han-sur-Lesse samples suggests that a simple heating technique (up to 550 °C) without crushing could both (a) recover water with δD representative of that of the drip water and (b) double the water yield as compared to the crushing and heating method.Our study warns for possible contamination of the recovered inclusion water with hydration water of lime, responsible for the recovery of water with very negative δD values.     

Considerations for conducting incubations to study the mechanisms of As release in reducing groundwater aquifers

Microbial Fe reduction is widely believed to be the primary mechanism of As release from aquifer sands in Bangladesh, but alternative explanations have been proposed. Long-term incubation studies using natural aquifer material are one way to address such divergent views. This study addresses two issues related to this approach: (1) the need for suitable abiotic controls and (2) the spatial variability of the composition of aquifer sands. Four sterilization techniques were examined using orange-colored Pleistocene sediment from Bangladesh and artificial groundwater over 8 months. Acetate (10 mM) was added to sacrificial vials before sterilization using either (1) 25 kGy of gamma irradiation, (2) three 1-h autoclave cycles, (3) a single addition of an antibiotic mixture at 1× or (4) 10× the typical dose, and (5) a 10 mM addition of azide. The effectiveness of sterilization was evaluated using two indicators of microbial Fe reduction, changes in diffuse spectral reflectance and leachable Fe(II)/Fe ratios, as well as changes in P-extractable As concentrations in the solid phase. A low dose of antibiotics was ineffective after 70 days, whereas autoclaving significantly altered groundwater composition. Gamma irradiation, a high dose of antibiotics, and azide were effective for the duration of the experiment.     

The effect of naturally acidified irrigation water on agricultural volcanic soils. The case of Asembagus, Java, Indonesia

Acid water from the Banyuputih river (pH  3.5) is used for the irrigation of agricultural land in the Asembagus coastal area (East Java, Indonesia), with harmful consequences for rice yields. The river water has an unusual composition which is caused by seepage from the acidic Kawah Ijen crater lake into the river. This unique irrigation setting allows the study of soil acidification in situ. This paper assesses the effects of volcanogenically contaminated irrigation water on the chemical properties of the agricultural soils.The changes in soil properties were evaluated by comparing samples taken from the topsoil and sub-soil (1–3 m depth) from areas irrigated with acid water and areas irrigated with neutral water. The field survey thus resulted in four soil categories. Bulk soil composition, organic matter content, moisture content and particle size distribution were determined. Reactive phases were quantified with the selective extractions 1 M KCl, 0.1 M Na-pyrophosphate and 0.2 M acid ammonium oxalate (AAO).By comparing the four soil categories it is shown that the use of the naturally polluted irrigation water has had a large influence on the chemical composition of the topsoil. The composition of the soil solution has changed over the entire investigated soil profile. Furthermore the acid irrigation water has strongly modified the composition of the reactive phases, extracted as KCl, pyrophosphate, and AAO extractable elements, and also the bulk soil composition has been significantly modified. Overall this has resulted in the net dissolution of some elements and the net precipitation of others. The changes in the reactive phases and bulk soil composition are only apparent in the topsoil (0–20 cm) but not in the deeper soil.     

Identification of chlorite and chlorite-related minerals in sediments

A scheme is presented for the identification and classification of chlorite and related minerals in sediments which is mainly based on X-ray characteristics of the orginal sample and the sample heated at 350°C and treated with K⁺ and with glycerol. Examples are given. It is emphasized that additional data about clay mineral genesis, electron microscopy, infrared spectroscopy and chemical analyses are needed for the ordening of a certain mineral in the proposed scheme. Many names of minerals so far found to occur in the clay separate of sediments proved to be synonymous (52 of a total of 88) and thus should be abandoned. They only give confusion and needlessly increase the many difficulties which already exist in the identification, classification and quantitative determination of this complicated group of minerals of about 36 well defined specimens which may be found in sediments.     

An optimized method for automated analysis of algal pigments by HPLC

A recent development in algal pigment analysis by high-performance liquid chromatography (HPLC) is the application of automation. An optimization of a complete sampling and analysis protocol applied specifically in automation has not yet been performed. In this paper we show that automation can only be successful if the various methodological aspects of the sampling and analysis protocol are considered in coherence. We introduce an optimized protocol that involves freeze-drying of the sample, subsequent extraction in 90% acetone and the application of water-packing during analysis. The method was evaluated on both natural plankton populations and a broad spectrum of microalgal cultures: Thalassiosira weisflogii (Bacillariophyceae), Emiliania huxleyi (Prymnesiophyceae), Phaeocystis globosa and Phaeocystis antarctica (Prymnesiophyceae) and Pyramimonas sp. (Prasinophyceae). Whereas pigment extracts were unstable in methanol, with recorded chlorophyll a losses from 10% to 60% per day, pigment degradation rates in acetone were generally less than 1% over 18 h storage in the autosampler (4 °C). In addition, it was found that the extraction efficiency of acetone significantly increased upon freeze-drying prior to extraction. Increases as high as 50–60% were measured in P. antarctica. The application of water-packing of the sample during injection resulted in improved peak shape and peak separation, without diluting the pigment concentrations. Automation is especially beneficial for application in the field, when mixed algal assemblages and low biomass put a high demand on the sensitivity as well as reproducibility of the method.     

A new method for the generation of second-order random waves

In order to prevent the generation of spurious free sub- and superharmonics of random waves in a laboratory channel, the control signal for the wave board has to be derived according to a higher-order wave theory. An expression for this control signal has been derived with the perturbation method of multiple scales. It is much less complex and requires less computation time than the expressions obtained from the full second-order theory. The new method for second-order subharmonics was verified experimentally for waves with bichromatic and continuous first-order spectra. The data were analysed with the complex-harmonic principal-component analysis to reduce the influence of noise.     

Measurement of the redox speciation of iron in seawater by catalytic cathodic stripping voltammetry

Catalytic cathodic stripping voltammetry (CSV) preceded by adsorptive collection of complexes of 1-nitroso-2-napthol (NN) can be used to determine iron in seawater. It is shown here that iron(II) is effectively masked in the presence of 2,2-dipyridyl (Dp) so that iron(III) is measured selectively. The concentration of iron(II) is then calculated as the difference between the concentrations of reactive iron (Fe_R) in the absence and presence of 2 μM Dp, Fe_R being defined as that which was complexed by 20 μM NN at pH 6.9 in the presence of 1.8 mM H₂O₂ and 5 ppm sodium dodecyl sulphate. A 30 min reaction time was allowed for Dp to react with iron(II) in seawater prior to the determination of reactive iron(III) using the same conditions as used for Fe_R. Detection limits of 0.08 nM, 0.077 nM and 0.12 nM were obtained for Fe_R, iron(III) and iron(II), respectively, using a 60 s deposition time.The method was utilised to determine the redox speciation of iron in the northern North Sea. Concentrations of Fe_R ranged between 0.8 and 3.5 nM with nutrient-like depth profiles. Iron(II) was found to be present at concentrations up to 1.2 nM, the highest concentrations occurring in the upper 20 m of the water column.     

Risk of dike failure due to flow slides

Flow slides may affect the stability of dikes. A flow slide is an instability of a submerged slope caused by liquefaction of loose, (medium) fine sand. Whether a flow slide will occur depends on the properties of the sand, which are a function of its density, and the geometry of the slope, as determined by wave and current induced scour and sedimentation. The influence of sand properties and the geometry parameters on the risk of flow slides are discussed. The application of a flow slide prediction method to an example and a risk analysis is briefly discussed.