Biomass burning in the tropical savannas of Ivory Coast: An overview of the field experiment Fire of Savannas (FOS/DECAFE 91)

FOS/DECAFE 91 (Fire of Savannas/Dynamique et Chimie Atmosphérique en Forêt Equatoriale) was the first multidisciplinary experiment organized in Africa to determine gas and aerosol emissions by prescribed savanna fires. The humid savanna of Lamto in Ivory Coast was chosen for its ecological characteristics representative of savannas with a high biomass density (900 g m^–2 dry matter). Moreover the vegetation and the climate of Lamto have been studied for more than twenty years. The emission ratios (X/CO₂) of the carbon compounds (CO₂, CO, NMHC, CH₄, PAH, organic acids and aerosols), nitrogen compounds (NO_x, N₂O, NH₃ and soluble aerosols) and sulfur compounds (SO₂, COS and aerosols) were experimentally determined by ground and aircraft measurements. To perform this experiment, 4 small plots (100×100 m) and 2 large areas (10×10 km) were prepared and burnt in January 1991 during the period of maximum occurrence of fires in this type of savanna. The detailed ecological study shows that the carbon content of the vegetation is constant within 1% (42 g C for 100 g of vegetal dry matter), the nitrogen content (0.29 g N for 100 g of dry matter) may vary by 10% and the sulfur content (0.05 g S/100 d.m.) by 20%. These variations of the biomass chemical content do not constitute an important factor in the variation of the gas and particle emission levels. With the emission ratios characteristic of humid savanna and flaming conditions (CO/CO₂ of 6.1% at the ground and 8% for airborne measurements), we propose a set of new emission factors, taking into account the burning efficiency which is about 80%: 74.4% of the carbon content of the savanna biomass is released to the atmosphere in the form of CO₂, 4.6% as CO, 0.2% as CH₄, 0.5% as NMHC and 0.7% as aerosols. 17.2% of the nitrogen content of the biomass is released as NO_x, 3.5% as N₂O, 0.6% as NH₃ and 0.5% as soluble aerosols.     

The use of rogation ceremony records in climatic reconstruction: a case study from Catalonia (Spain)

The use of rogation ceremonies due to environmental causes constitutes an important source of information in paleoclimatic reconstructions. Their specific characteristics and full documental records permit highly reliable series to be reconstructed with daily, monthly, seasonal or annual resolution over periods of several centuries (3–4 centuries in the case of Catalonia). The levels of intensity, reflected in the type of religious ceremony enacted, allows quantification. Comparative analysis is made possible by the similarity of the mechanisms developed in different localities. The use of these series in paleoclimatological studies is a promising line of research, particularly as regards the pro pluvia rogations celebrated in the Mediterranean countries and in South America.     

Pristine vs. contaminated trends in Nb,Ta-oxide minerals of the Jihlava Pegmatite District,Czech Republic

Summary Columbite-tantalite is widespread in the lepidolite-subtype rare-element pegmatites of the Jihlava pegmatite district, western Moravia, Czechoslovakia. In most pegmatites, fractionation of columbite-tantalite shows initial enrichment in Mn followed by increasing Ta, in accordance with the usual trend from ferrocolumbite through mangano-columbite to manganotantalite, typical of the lepidolite pegmatites. Many dikes, however, show local deviations toward Fe- and Ti-rich compositions. In extreme cases, all columbite-tantalite is strongly enriched in Fe and Ti, and is associated with ixiolite and tantalian rutile. The degree of enrichment of the Nb,Ta oxide-mineral assemblage in Fe and Ti is proportional to tectonic introduction of wallrock xenoliths of mafic pyroxene-biotite syenite into the pegmatites during late stages of their consolidation. Extensive reaction of the residual pegmatite melt with the xenoliths contaminated the near-by melt, and generated Nb,Ta oxide minerals and tourmaline of non-typical chemistries. Late fersmite probably formed after thermal equilibration of the pegmatites with their syenitic country rocks, from Ca-bearing regional interstitial fluids pervading through the solidified pegmatites.

---

Zusammenfassung In Selten-Element Pegmatiten (Lepidolith-Subtyp) des Jihlava Pegmatit Distriktes, West-Mähren, Tschechien, ist Columbit-Tantalit weitverbreitet. In den meisten Pegmatiten führte die Fraktionierung von Columbit-Tantalit zur einer anflinglichen Anreicherung von Mn gefolgt von einer Zunahme in Ta, vergleichbar mit dem für Lepidolith-Pegmatit bekannten Trend Ferrocolumbit-Manganocolumbit-Manganotantalit. Viele Gänge zeigen jedoch lokale Abweichungen zu Fe- und Ti-reichen Zusammensetzungen. In extremen Fällen ist Columbit-Tantalit stark an Fe und Ti angereichert und mit Ixiolith und Tantalo-Rutil vergesellschaftet. Das Ausmaß der Fe und Ti Anreicherung in (Nb,Ta)-Oxid-Assoziationen ist proportional dem tektonisch bedingten Eindringen von maischen Pyroxen-Biotit-reichen Syenit-Nebengesteinsxenolithen in die Pegmatite gegen Ende ihrer Verfestigung. Tiefgreifende Reaktion der Pegmatit-Restschmelze mit den Xenolithen kontaminierte die Schmelze und führte zur Bildung von (Nb,Ta)-Oxid-Mineralen und Turmalin ungewöhnlicher Zusammensetzung. Möglicherweise nach der thermischen Gleichgewichtseinstellung der Pegmatite mit ihren syenitischen Nebengesteinen bildete sich Fersmit unter Beteiligung von Ca-führenden regionalen Porenlösungen, welche die verfestigten Pegmatite durchdrangen.

---

---

With 6 Figures     

Towards an understanding of joint roughness

Summary It is argued that the currently available joint models are incapable of accurate predictions of joint shear behaviour without resorting to substantial levels of empiricism. This is because these models fail to adequately quantify joint roughness, or appreciate the importance of scale. A novel approach, which uses fractal geometry to investigate joint roughness, is described. This approach goes beyond describing the symptoms of roughness and seeks to find the cause. In the application of this approach, the concepts of fractal geometry, fractal dimension and self similarity are described and used as a framework to formulate a statistically based and practical model for the characterisation of rock joint roughness. Important relationships between the fractal dimension and the more useful statistical parameters of standard deviation of both asperity angles and asperity heights are derived. These relationships not only provide a useful, working method for quantifying joint roughness, but are also shown to provide a basis for understanding the Barton empirical JRC-JCS model. In addition, the fractal model is able to provide conceptual models for the effects of normal stress on the shear behaviour of joints and the scale-dependence of joints.     

Geochemical and structural evolution of micas in the Rožná and Dobrá Voda pegmatites,Czech Republic

Summary The chemistry, structural parameters, polytypism, optical properties and Rb-Sr isotopes were examined in 11 to 60 samples of biotite, muscovite and lepidolite from the pegmatites at Roná (the type locality of lepidolite; 323 ± 4Ma) and Dobrá Voda (306 ± 9Ma) in western Moravia. At both localities, early endocontact biotite is followed inwards by muscovite and lepidolite, which is concentrated in and around the core. At Roná, a 1M lepidolite follows after 2M₁ muscovite but all later generations of lepidolite are 2M₂, close to Tri₅₀ Ply₅₀ and in part associated with muscovite 2M₁. At Dobrá Voda, all lepidolite types are 1M and free of muscovite, and the late varieties approximate Tri₃₀ Ply₇₀. At both localities, a trend of increasing HF is indicated during the progress of mica crystallization, culminating in precipitation of topaz. Polytypism of lepidolite is not correlatable with any compositional or growth feature, or their combination. Throughout the mica crystallization, Rb/Cs decreases but K/Rb becomes reversed after an initial decrease. Boron is partitioned preferentially into muscovite (up to 1.10 wt.% B₂O₃) but Be, Zn, Mn and Sc are enhanced in lepidolite. A slight increase in Fe, Ba and Cl in the last generation of lepidolite might be possibly due to mixing of residual pegmatite fluids with metamorphic pore solutions.

---

Geochemische und strukturelle Entwicklung der Glimmer in den Pegmatiten von Roná und Dobrá Voda, Tschechische Republik

Zusammenfassung In 11 bis 60 Proben von Biotit, Muskovit und Lepidolith aus den Pegmatiten von Roná (Typlokalität des Lepidoliths; 323 ± 9 Ma) in Westmähren wurden Chemie, Struktur-parameter, Polytypie, optische Eigenschaften und Rb-Sr-Isotopie untersucht. An beiden Lokalitäten wird früher Biotit an Endokontakten nach Innen von Muskovit und Lepidolith gefolgt, letzterer ist in und um den Kern konzentriert. In Roná folgt 1M-Lepidolith auf 2M₁-Muskovit, aber alle späteren Lepidolithgenerationen sind 2M₂, nahe Tri₅₀Ply₅₀ und zum Teil mit 2M₁-Muskovit vergesellschaftet. In Dobrá Voda sind alle Lepidolithe vom Typ 1M und frei von Muskovit, die späten Varietäten kommen Tri₅₀Ply₅₀ nahe. An beiden Lokalitäten ist während des Fortschreitens der Glimmerkristallisation eine Tendenz von steigendem HF angezeigt, die in der Ausfällung von Topas ihren Höhepunkt findet. Die Polytypie des Lepidoliths kann nicht mit irgendeiner Eigenheit der Zusammensetzung oder des Wachstums korreliert worden, auch nicht mit einer Kombination von diesen. Während der ganzen Glimmerkristallisation nimmt Rb/Cs ab, aber die Tendenz von K/Rb ändert sich nach anfänglichem Abfall. Das Bor verteilt sich bevorzugt auf den Muskovit (bis zu 1.10 Gew. -% B₂O₃), aber die Be-, Zn-, Mn- und Sc-Gehalte sind im Lepidolith erhöht. Ein leichter Ansteig von Fe, Ba und Cl in der letzten Lepidolithgeneration könnte vielleicht durch eine Mischung von pegmatitischen Restlösungen mit metamorphen Porenlösungen verursacht sein.

---

---

With 9 Figures     

Geochemistry of the Grenville Dyke Swarm: role of plume-source mantle in magma genesis

Major and trace element data of samples from the approximately 590 Ma Grenville dyke swarm, in the southeastern parts of the Canadian Shield, were used to evaluate the extent of crustal contamination of the dyke magma and to model its probable mantle source. The dyke rocks are mostly saturated, quartz tholeiites. A few samples represent transitional basalts. Their overall chemistries are similar to those of continental flood basalts. Their compositions resemble those of liquids initially produced in the garnet peridotite mantle zone and then subjected to polybaric fractionation. However, fractionation models fail to mass-balance Ti, Fe, K, and P. Geochemical and isotopic criteria indicate that crustal contamination was minimal. The incompatible elements Zr, Y, K, Rb, Nb, V, Ta, Hf, and Th show hyperbolic elemental ratio-ratio distributions indicative of mixing between two end-members. One end-member has elemental ratios similar to those of a depleted N-MORB source and the second of a P-MORB i.e. ertile or plume MORB source. The more enriched dyke compositions can be successfully reproduced by mixing models in the ratio of 6:1 between the most depleted MORB-like dyke magma and a liquid composition similar to metasomatic glass veinlets coexisting with mica peridotite mantle xenoliths, and subsequent crystal fractionation. The Grenville dykes are probably a synrift swarm that was emplaced along a rift arm related to an Iapetan rrr triple junction that is thought to have formed over a mantle plume. The chemistry of the dyke swarm is consistent with its derivation from a plume head, in that the minor enriched source can be identified with plume-source mantle and the major depleted source with entrained mantle. The magma probably originated in the upper cooler parts of the plume head.     

Sector collapse,sedimentation and clast population evolution at an active island-arc volcano: Stromboli,Italy

Sciara del Fuoco is the subaerial part of a partially filled sector-collapse scar that extends to 700 m below sea level on Stromboli volcano. The collapse occurred <5000 years ago, involved 1.81 km³ of rock and is the latest of a series of major collapses on the north-west flank of Stromboli. A north-east trending arc-axial fault system channels magmas into the volcano and has caused tilting and/or downthrow to the north-west. The slope of the partial cone constructed between the lateral walls of the collapse scar acts as a channelway to the sea for most eruptive products. From 700 m below sea level and extending to >2200 m and >10 km from the shore to the NNW, a fan-shaped mounded feature comprises debris avalanche deposits (>4 km³) from two or more sector collapses. Volcaniclastic density currents originating from Sciara del Fuoco follow the topographic margin of the debris avalanche deposits, although overbank currents and other unconfined currents widely cover the mounded feature with turbidites. Historical (recorded) eruptive activity in Sciara del Fuoco is considerably less than that which occurred earlier, and much of the partial fill may have formed from eruptions soon after the sector collapse. It is possible that a mass of eruptive products similar to that in the collapse scar is dispersed as volcanogenic sediment in deep water of the Tyrhennian basin. Evidence that the early post-collapse eruptive discharge was greater than the apparent recent flux (2kg/s) counters suggestions that a substantial part of Stromboli's growth has been endogenous. The partial fill of Sciaria del Fuoco is dominated by lava and spatter layers, rather than by the scoria and ash layers classically regarded as main constituents of Strombolian (cinder) cones. Much of the volcanic slope beneath the vents is steeper than the angle of repose of loose tephra, which is therefore rapidly transported to the sea. Delicate pyroclasts that record the magmatic explosivity are selectively destroyed and diluted during sedimentary transport, mainly in avalanches and by shoreline wave reworking, and thus the submarine deposits do not record well the extent and diversity of explosive activity and associated clast-forming processes. Considerable amounts of dense (non-vesicular) fine sand and silt grains are produced by breakage and rounding of fragments of lava and agglutinate. The submarine extension of the collapse scar, and the continuing topographic depression to >2200 m below sea level, are zones of considerable by-passing of fine sand and silt, which are transported in turbidity currents. Evidently, volcanogenic sediments dispersed around island volcanoes by density currents are unlikely to record well the true spectrum and relative importance of clast-forming processes that occurred during an eruption. Marine sedimentary evidence of magmatic explosivity is particularly susceptible to partial or complete obliteration, unless there is a high rate of discharge of pyroclastic material into the sea.     

Mafic magma batches at Vesuvius: a glass inclusion approach to the modalities of feeding stratovolcanoes

Glass inclusions in olivine and diopside phenocrysts from pyroclasts of various eruptions of Vesuvius are representative of the magmas that supplied the volcano in the last 4–5000 years. During this interval the volcano alternated between open conduit activity (e.g. 1944 and 1906 eruptions) with long pauses interupted by Plinian and sub-Plinian eruptions (e.g. 3360 B.P. Avellino, A.D. 79 Pompei, A.D. 472 Pollena). The eruptive behaviour was conditioned in all cases by the presence of shallow reservoirs: two cases are distinguished: (1) small and very shallow, 1906-type; (2) large and deeper Plinian-sub-Plinian magma chamber. Lapilli of 1906 lava fountains contain olivine (Fo_89.5–90.4) including Cr-spinel [Cr/(Cr+Al)] (Cr#>75) and volatile-K-rich tephritic glasses, which represent the first recognized Vesuvius primary magmas. Mg-poorer olivine (Fo_83–89) also occurs in 1906 and 1944 products; it formed within the shallow reservoir, together with pyroxene and leucite, between 1200 and 1130°C, from K-tephritic melts (MgO=6–8 wt%). The Plinian and sub-Plinian pumices contain diopside, phlogopite and minor olivine (Fo_85–87) representing adcumulates wrenched from the chamber walls. Glass inclusions in diopside (and some olivine) range from K-basalt to K-tephrite (MgO=6–8 wt%), with homogenization temperature of 1130–1170°C. They have been regarded as representative of the magmas supplying the Plinian-sub-Plinian chamber(s). The Avellino glass inclusions have K-basaltic compositions, contrasting with the mostly K-tephritic Pompei and Pollena inclusions. They display lower C1 and P contents with respect to the younger tephritic melts, and these variations should reflect primary features of the mantle-derived magmas. The primary and the near-primary Vesuvius magmas, as illustrated by melt inclusions, emphasize high K, P and volatile (H₂O, Cl, F, S) contents, with high K₂O/H₂O (2–2.5), Cl/F (2.5) and Cl/S (2–3) ratios, consistent with a metasomatized mantle source, and distinguishing the Vesuvius potassic primary magmas from those of the northern part of the Roman Province.     

The Lilloise Intrusion, East Greenland: Fractionation of a Hydrous Alkali Picritic Magma

The Lilloise is an 8 km4 km layered mafic intrusion which cutsthe plateau basalts of the East Greenland Tertiary province.Lilloise was intruded at 50 Ma, 4–5 Ma after cessationof the voluminous tholeiitic magmatism which accompanied riftingof the East Greenland continental margin. Lilloise is unusualamong layered intrusions in the province because it had a hydrousalkali picrite parent magma and generated a late-stage effluxof magmatic water from the intrusion into the aureole rocks.The three major subdivisions of the layered rocks are: olivine-clinopyroxene,olivine-clinopyroxene-plagioclase and plagioclase-amphibolecumulates. Massive subsidence of the intrusion before completesolidification resulted in deformation of the internal layeringand downturn of the bedding in the surrounding basalts. A strikingfeature of the intrusion is the injection of the layered rocksby a plexus of magmatic sheets which formed at the time of subsidence.The composition of these sheets is representative of the fractionationtrend of the intrusion and ranges from hawaiite to mildly saturatedquartz trachyte. The fractionation trend is successfully explainedby extraction of cumulus minerals of the layered rocks froma parent magma represented by alkali picrite dykes of a contemporaneousregional dyke swarm. Saturated to mildly over-saturated syenitesare a major component of the East Greenland province and theLilloise intrusion is illustrative of an important magmatictrend towards such compositions at this stage in the openingof the North Atlantic. KEY WORDS: Lilloise intrusion; East Greenland; alkali picrite magma; layered intrusion; magmatic differentiation ^*Corraponding author     

Radiometric constraints on hydrothermal circulation in cooling granite plutons

Improved precision of radiometric dating of ore deposits can provide information about the thermal history of hydrothermal circulation in cooling plutons. In Jales a Hercynian porphyritic two-mica granite and pre-Ordovician mica schists are cut and intensely altered by the Campo gold-quartz vein. The unaltered granite must be younger than 320 ± 6 Ma, and gives mica Rb-Sr ages of 308.5 ± 2.4 (1) Ma (muscovite) and 294.5 ± 1.1 Ma (biotite). Alteration muscovites from the granite give a weighted mean Rb-Sr age of 308.1 ± 1.5 Ma, and a mean ³⁹Ar-⁴⁰Ar age of 300.7 ± 2.8 Ma. Alteration muscovites from the mica schists give similar ³⁹Ar-⁴⁰Ar ages, averaging 303.0 ± 2.8 Ma. The results suggest that circulation of the Campo mineralising fluids took place no more than 2–4 Ma after the granite cooled through the muscovite Rb-Sr closure temperature, about 500 °C, and that subsequent cooling to biotite closure at about 300 °C took place at less than 14°C/Ma. The mean cooling rate following emplacement was 15 to 25 °C/Ma. The most detailed comparable published data, for the Cornubian ore field, imply much faster cooling rates.