Small-scale landfills: impacts on groundwater and soil

In Brazil, the large quantities of solid waste produced are out of step with public policies, technological developments, and government budgets for the division. In small municipalities, the common lack of technological knowledge and financial conditions for suitable waste disposal has resulted in a large number of illegal dumps. Therefore, small sanitary landfill facilities are working with simplified operations focusing on cost reduction and meeting the economic and technological standards of the city without endangering the environment or public health. Currently, this activity is regulated at a federal level although there is some uncertainty regarding the risk of soil and aquifer contamination as theses facilities do not employ liners. Thus, this work evaluates a small landfill to identify changes in soil and groundwater using geotechnical parameters, monitoring wells, and geophysical tests performed by electrical profiling. It is verified that based on current conditions, no contaminants have migrated via underground water aquifers, and overall no significant changes have occurred in the soil. It is concluded that, despite its simplicity, the method investigated is a viable alternative for the final disposal of municipal solid waste from small cities, especially in developing countries.     

Sediment chemical contamination of a shallow water area close to the industrial zone of Porto Marghera (Venice Lagoon, Italy)

The industrial zone of Porto Marghera is one the most important "contaminated sites of national interest" (SIN) in Italy, being identified as an area of high environmental risk. The site includes a wide shallow water area of the Venice Lagoon extending toward the city of Venice, which was investigated in order to acquire information on the pollutant level and distribution. Grain-size, heavy metal, nutrient, and organic micropollutant concentrations were determined in the surface sediment layers (0-5 and 5-10 cm depths) of 51 sites. A generally low contamination was found, except for Hg concentration, which increases the toxicological risk in most of the sites of the area, according to the results of a comparison with Sediment Quality Guidelines. A heavy pollution fingerprint (Cd, Cu, Hg, Pb, and Zn up to 15.2, 257, 11.9, 248, and 3010 mg/kg d.w., respectively) was instead found near the Tresse Island, which is ascribed to the spill of pollutants from the contaminated sediment disposed therein. Grain-size and heavy metal profiles down to a depth of 40 cm in eight selected sites, finally show a probable decrease of the pollution affecting the area in recent years.     

Bedform-induced hyporheic exchange with unsteady flows

The interaction between surface and subsurface water has a crucial influence on the biochemistry of stream environments. Even though the river discharge and the flow conditions can seldom be considered to be steady, the influence of this unsteadiness on the hyporheic exchange has often been neglected. In this work, a model for the study of hyporheic exchange during unsteady conditions has been developed. The model provides a sound analytical framework for the analysis of the effects of a varying stream discharge on the exchange between a stream and the hyporheic zone. The effects of the unsteadiness on the water exchange flux, the residence time of the solutes in the bed, and the stored mass are quantified. A synthetic example shows the substantial influence of a flood on the hyporheic exchange, and that the application of a steady model can lead to an underestimation of the exchanged mass, even after the flood has ended.     

Inelastic response and design criteria of plan-wise asymmetric systems

The study of the torsional response of buildings in the inelastic range of behaviour is of great interest since the ability of structures to resist strong earthquakes mainly relies on their ductility and capacity for energy dissipation. Furthermore, an examination of the performance of structures during past earthquakes demonstrates that plan-asymmetric buildings suffered greater damage due to torsional response. The paper deals with this subject by analysing a model which idealizes a one-storey building with resisting elements oriented along two perpendicular directions. In addition to the parameters of the elastic behaviour, the inelastic system response depends on full yield capacity and plan-wise strength distribution. The influence of the criterion adopted for the design of resisting elements on local ductility demand and damage has been evaluated by parametric analysis. In particular, a comparison has been carried out between systems with equal design levels for all elements and systems with design levels dependent on the element location. For a given elastic behaviour and total capacity, the strength distributions in plan have been defined which minimize ductility demand and structural damage. Finally, based on these findings, responses from models designed according to several seismic codes have been compared.     

Damped resonant appendages to increase inherent damping in buildings

It is demonstrated that the addition of a tuned mass-spring-dashpot system with a relatively small mass and a high damping ratio can be an effective way to increase the inherent damping characteristics of buildings and reduce, thus, their response to earthquake excitations. The demonstration is based on a theoretical formulation and on numerical and experimental studies that confirm this formulation. In the theoretical formulation, it is shown first that, if certain conditions are satisfied, the damping ratios in two of the modes of the system that is formed by a building and an appendage in resonance are approximately equal to the average of the corresponding damping ratios of the building and the appendage. Based on this finding, it is then shown that an attached appendage with a high damping ratio and tuned to the fundamental frequency of a building may increase the damping ratio in the fundamental mode of the building to a value close to half the damping ratio of the appendage. In the numerical study, the response of a ten-storey shear building is analysed under two different earthquake ground motions with and without the proposed resonant appendages. Appendages with damping ratios of 20 and 30 per cent are considered. In this study, it is found that under one of the ground motions the maximum displacement of the building's roof is reduced 30 per cent with the appendage with 20 per cent damping and 39 per cent with the one with 30 per cent damping. Similarly, with these two appendages the building's base shear is reduced 31 and 41 per cent, respectively. In the experimental study, a wooden three-storey structural model is tested in a shaking table with and without an appendage designed and constructed to have a damping ratio of 53-5 per cent. The test is conducted under random and sinusoidal base excitations. In the shaking table test under random excitation, the attached appendage reduces the response of the model 38-6 per cent, while in that under sinusoidal vibration 45-2 per cent.     

Rosenblueth's modal combination rule for systems with non-classical damping

A simple rule is derived to combine, within the framework of a complex mode superposition, the maximum modal responses of systems such as soil-structure and structure-equipment systems, for which closely spaced natural frequencies are likely, and for which, because of the large difference in the damping values of their various components, the assumption of an orthogonal damping matrix may lead to significant errors. The rule constitutes the generalization of Rosenblueth's rule for systems with closely spaced natural frequencies and classical modes, and is expressed in terms of their complex mode shapes and natural frequencies. Its derivation is based on the theory of a complex modal analysis for systems with non-classical modes of vibration and on Rosenblueth's original derivation. As in this original derivation, earthquake ground motions are modelled as a stationary white noise process, but the formulae obtained under this assumption are modified later on to account for the transient nature of actual earthquakes. A numerical example is presented to illustrate the application of the rule, and a comparative study with numerical integration solutions is performed to assess its accuracy. In this comparative study, it predicts the numerical integration solutions with an average error of 0.3 per cent.     

Neural networks for regional employment forecasts: are the parameters relevant?

In this paper, we present a review of various computational experiments concerning neural network (NN) models developed for regional employment forecasting. NNs are nowadays widely used in several fields because of their flexible specification structure. A series of NN experiments is presented in the paper, using two data sets on German NUTS-3 districts. Individual forecasts are computed by our models for each district in order to answer the following question: How relevant are NN parameters in comparison to NN structure? Comprehensive testing of these parameters is limited in the literature. Building on different specifications of NN models—in terms of explanatory variables and NN structures—we propose a systematic choice of NN learning parameters and internal functions by means of a sensitivity analysis. Our results show that different combinations of NN parameters provide significantly varying statistical performance and forecasting power. Finally, we note that the sets of parameters chosen for a given model specification cannot be light-heartedly applied to different or more complex models.     

Seismotectonic regionalization of the Red Sea area and its application to seismic risk analysis

A seismological evaluation of the Red Sea margin is presented in this contribution based on the concept of seismotectonic regionalization. The geology and the tectonic structure are critically reviewed to define regions of homogeneous seismicity in the study area, and available seismicity data are implemented to estimate the seismic parameters of the region. The results of the study are applied to evaluate the seismic hazard of an offshore platform site.