Deterring effects of 8-45 kHz tone pulses on harbour seals (Phoca vitulina) in a large pool

The marine aquaculture industry suffers losses due to pinniped attacks which damage net enclosures and fish stocks. Acoustic harassment devices (AHDs) emit loud sounds which are intended to deter pinnipeds from approaching aquaculture enclosures. At present, many AHDs emit sounds in the 8-20 kHz frequency range. It is not known whether sounds of higher frequencies have a deterrent effect on seals. Therefore five captive harbour seals (Phoca vitulina) were subjected to four series of tone pulses together spanning a broad frequency range (8, 16, 32 and 45 kHz). Pulse duration was 250 ms and pulse interval was 5s. Each of the four sounds was made deterrent by increasing the amplitude. The seals reacted by swimming away from the sounds. The displacement effect of each sound was judged by comparing the animals' surface positions, and number of surfacings, during ten 45 min baseline periods with ten 45 min test periods per frequency (one frequency per day in rotation, 40 sessions in total). The seals were displaced by all four frequencies throughout the 40 trial days. The seals came to the surface more often when the test tones were produced than in the baseline periods. The initial displacement distances did not change over the 40 test days. This suggests that operating AHDs for only short periods will be more effective and less likely to result in habituation by the seals than operating them continuously. The discomfort threshold sound pressure level (SPL) was established for each of the four pulse frequencies. The acoustic discomfort threshold SPL is defined as the boundary SPL between the area that the animals generally occupied during the transmission of the sounds and the area that they generally did not enter during sound transmission. The discomfort threshold SPL may depend on the context.     

SCUBA's first-born: SMM J02399-0136

We discuss observations of the submm-selected galaxy,SMM J02399-0136, and what has been learnt about it during the yearfollowing its discovery. SMM J02399-0136 was the first distantgalaxy detected in surveys with the Submm Common-User Bolometer Array(SCUBA). Its association with a massive, gas-rich starburst/AGN atz = 2.8 has lead to suggestions that the prevalence of AGN in theearly Universe may be high (Ivison et al. 1998) and that these AGNmay account for a significant fraction of the far-IR background (e.g.Fixsen et al. 1998).     

Minibasin depocentre migration during diachronous salt welding,offshore Angola

Salt tectonics is an important part of the geological evolution of many continental margins, yet the four-dimensional evolution of the minibasins, the fundamental building block of these and many other salt basins, remains poorly understood. Using high-quality 3D seismic data from the Lower Congo Basin, offshore Angola we document the long-term (>70 Myr) dynamics of minibasin subsidence. We show that, during the Albian, a broadly tabular layer of carbonate was deposited prior to substantial salt flow, diapirism, and minibasin formation. We identify four subsequent stages of salt-tectonics and related minibasin evolution: (i) thin-skinned extension (Cenomanian to Coniacian) driven by basinward tilting of the salt layer, resulting in the formation of low-displacement normal faults and related salt rollers. During this stage, local salt welding led to the along-strike migration of fault-bound depocentres; (ii) salt welding below the eastern part of the minibasin (Santonian to Paleocene), causing a westward shift in depocentre location; (iii) welding below the minibasin centre (Eocene to Oligocene), resulting in the formation of a turtle and an abrupt shift of depocentres towards the flanks of the bounding salt walls; and (iv) an eastward shift in depocentre location due to regional tilting, contraction, and diapir squeezing (Miocene to Holocene). Our study shows that salt welding and subsequent contraction are key controls on minibasin geometry, subsidence and stratigraphic patterns. In particular, we show how salt welding is a protracted process, spanning > 70 Myr of the salt-tectonic history of this, and likely other salt-rich basins. The progressive migration of minibasin depocentres, and the associated stratigraphic architecture, record weld dynamics. Our study has implications for the tectono-stratigraphic evolution of minibasins.     

Clay minerals in the late Quaternary sediment of Tulare Lake,California: Implications for climate change,weathering, and erosion processes

The clay mineralogy of Tulare Lake sediment was examined to investigate hydroclimatic and environmental changes in the southern Sierra Nevada Mountains (SNM) since the most recent glacial maximum. Evolution of clay mineral assemblages elucidates significant changes in weathering, erosion, and hydroclimatic condition in the catchment. During the last glacial period (24.4–15.1 cal ka BP), low illite content implies less physical erosion of the granitic batholith rocks and a cold and arid environment in the southern SNM. Abrupt increases of illite content at 21.8–20.8 and 17.6 cal ka BP resulted from the glacier advances to the ablation zone and illite-rich glacier flour was transported down to the lake. The gradual increase of smectite induced by progressive depletion of illite-rich glacier flour from 17.6 cal ka BP toward the end of this period indicates climate was beginning to get warm and wet. From 11.9 to 5.3 cal ka BP, two warm and wet periods (10.7–9.4 and 8.2–5.2 cal ka BP) were characterized by high smectite/illite content ratios and low illite crystallinity values, suggesting intensive rainfall precipitation and more physical erosion in the highland and lowland catchment as well as more smectite formation in the terrace soils. Since the last glacial period, physical erosion, in comparison to the chemical weathering, was the dominant process responding to the hydroclimatic change in the Tulare Lake catchment. Moderate to weak chemical weathering was signified by the mostly low illite chemical weathering index of the core sediments. Such results suggest that vegetation cover in the southern SNM was low and limited.     

Anomalous archaeomagnetic directions and site formation processes at archaeological sites in Israel

As part of a program to investigate archaeomagnetic secular variation in Israel and implications for archaeomagnetic dating, we have identified “anomalous” results that have yielded information about site formation processes. Stereonets, vector demagnetization diagrams, and sample location maps are most useful in examining stability of magnetization and consistency of archaeomagnetic directions with each other and with what would be expected from normal secular variation. A collection of examples is presented, including: strong and hard remanence due to vitrification, unstable magnetization due to lightning strikes, superimposed thermal magnetizations, chemical remagnetization, magnetization of a hearth fragment before falling, magnetization of a hot brick after falling, and mechanical deformation of an archaeomagnetic feature. © 1999 John Wiley & Sons, Inc.     

Geophysical investigation for the location of a historic Heiau,Kawaihae, Hawaii

A geophysical investigation was conducted at the U.S. National Park Service's Pu'ukohola Heiau National Historic Site, Kawaihae, Hawaii. The purpose of this investigation was to delineate the location of a buried heiau using nonintrusive geophysical methods. Magnetic, electromagnetic, and ground penetrating radar geophysical surveys were used in this effort. The surveys were conducted both on and offshore. The interpretation of the survey results indicated one onshore and two offshore sites where the heiau might be located. Confirmation of the heiaus existence would require detailed studies such as excavating or the placement of exploration borings. © 1997 John Wiley & Sons, Inc.     

Lead smelting slags near Nal,Balochistan Province,Pakistan

Samples of slag from three sites of a traditional lead industry located between Khuzdar and Nal were studied to determine their petrology, chemical composition, smelting conditions, source material, and age. Polished thin sections viewed in reflected light revealed a white glassy matrix with occasional rare mineral grains. Using an automated microprobe, typical glass composition was found to be 40% SiO₂, 17% FeO, 11% CaO, 12% PbO, and 10% BaO. Repeated applications of Principal Component Analysis to the data revealed that the compositions of our slags fell within a tetrahedron. The ratios of most components to other components were found to be nearly constant, suggesting that the same indigenous source materials were mixed in almost the same proportion at all the sites. A comparative study of the composition of our slag in relation with various binary and ternary phase diagrams after necessary normalization of the data showed that addition of CaO and BaO by the traditional smelters and the formation of PbO during the process of smelting helped to lower the temperature required for smelting below 1200°C. Lead isotopic compositions suggested that our lead is isotopically distinct from sites in Greece. © 1993 John Wiley & Sons, Inc.