Two- and three-dimensional inversions of magnetic anomalies in the MARK area (Mid-Atlantic Ridge 23° N)

Magnetic data collected in conjunction with a Sea Beam bathymetric survey of the Mid-Atlantic Ridge south of the Kane Fracture Zone are used to constrain the spreading history of this area over the past 3 Ma. Two-dimensional forward modeling and inversion techniques are carried out, as well as a full three-dimensional inversion of the anomaly field along a 90-km-long section of the rift valley. Our results indicate that this portion of the Mid-Atlantic Ridge, known as the MARK area, consists of two distinct spreading cells separated by a small, zero-offset transform or discordant zone near 23°10′ N, The youngest crust in the median valley is characterized by a series of distinct magnetization highs which coalesce to form two NNE-trending bands of high magnetization, one on the northern ridge segment which coincides with a large constructional volcanic ridge, and one along the southern ridge segment that is associated with a string of small axial volcanos. These two magnetization highs overlap between 23° N and 23°10° N forming a non-transform offset that may be a slow spreading ridge analogue of the small ridge axis discontinuities found on the East Pacific Rise. The crustal magnetizations in this overlap zone are generally low, although an anomalous, ESE-trending magnetization high of unknown origin is also present in this area. The present-day segmentation of spreading in the MARK area was inherited from an earlier ridge-transform-ridge geometry through a series of small (∼ 10 km) eastward ridge jumps. These small ridge jumps were caused by a relocation of the neovolcanic zone within the median valley and have resulted in an overall pattern of asymmetric spreading with faster rates to the west (14 mm yr⁻¹) than to the east (11 mm yr⁻¹). Although the detailed magnetic survey described in this paper extends out to only 3 Ma old crust, a regional compilation of magnetic data from this area by Schoutenet al. (1985) indicates that the relative positions and dimensions of the spreading cells, and the pattern of asymmetric spreading seen in the MARK area during the past 3 Ma, have characterized this part of the Mid-Atlantic Ridge for at least the past 36 Ma.     

The Biancavilla-Montalto ingnimbrite (Etna,Sicily)

Stratigraphic, granulometric, and SEM grain texture studies have been carried out on pyroclastic deposits in the Biancavilla and Montalto areas on the lower SW flank of Etna. These studies support the interpretation that the deposits were emplaced as pyroclastic flows during the final stage of the Ellittico eruptive activity (14.18±26 ka). Based on the high percentage of juvenile components and granulometric characteristics, the deposits are classified as normal ignimbrite. Four separate flow units have been distinguished based on the presence of fine-grained basal layers. A multivariate G-mode statistical analysis has been used to discriminate particle morphology populations between flow units and infer temporal changes in the nature of the eruptive processes. The initial flow (I) was emplaced at a high temperature and involved a juvenile gas phase exolved from the magma. Subsequent flows (II, III, IV) exhibit evidence for the interaction of external water.     

Validation of very high cloud droplet number concentrations in air masses transported thousands of kilometres over the ocean

The microstructure of orographic clouds related to the aerosol present was studied during the second Aerosol Characterisation Experiment (ACE‐2). Very high cloud droplet number concentrations (almost 3000 cm⁻³) were observed. These high concentrations occurred when clouds formed on a hill slope at Tenerife in polluted air masses originating in Europe that had transported the order of 1000 km over the Atlantic Ocean. The validity of the measured droplet number concentrations was investigated by comparing with measurements of the aerosol upstream of the cloud and cloud interstitial aerosol. Guided by distributions of the ratios between the measurements, three criteria of typically 30% in maximum deviation were applied to the measurements to test their validity. Agreement was found for 88% of the cases. The validated data set spans droplet number concentrations of 150–3000 cm⁻³. The updraught velocity during the cloud formation was estimated to 2.2 m s⁻¹ by model calculations, which is typical of cumuliform clouds. The results of the present study are discussed in relation to cloud droplet number concentrations previously reported in the literature. The importance of promoting the mechanistic understanding of the aerosol/cloud interaction and the use of validation procedures of cloud microphysical parameters is stressed in relation to the assessment of the indirect climatic effect of aerosols.     

Hf-W chronometry of primitive achondrites

Metal segregation and silicate melting on asteroids are the most incisive differentiation events in the early evolution of planetary bodies. The timing of these events can be constrained using the short-lived ¹⁸²Hf-¹⁸²W radionuclide system. Here we present new ¹⁸²Hf-¹⁸²W data for major types of primitive achondrites including acapulcoites, winonaites and one lodranite. These meteorites are of particular interest because they show only limited evidence for partial melting of silicates and are therefore intermediate between chondrites and achondrites.For acapulcoites we derived a ¹⁸²Hf-¹⁸²W age of Δt_CAI = 4.1 ^+1.2/_−1.1 Ma. A model age for winonaite separates calculated from the intercept of the isochron defines an age of Δt_CAI = 4.8 ^+3.1/_−2.6 Ma (assuming a bulk Hf/W ratio of ∼1.2). Both ages most likely define primary magmatic events on the respective parent bodies, such as melting of metal, although metal stayed in place and did not segregate to form a core. A later thermal event is responsible for resetting of the winonaite isochron, yielding an age of Δt_CAI = 14.3 ^+2.7/_−2.2 Ma, significantly younger than the model age. Assuming a co-genetic relationship between winonaites and silicates present in IAB iron meteorites (based on oxygen isotope composition) and including data by Schulz et al. (2009), a common parent body chronology can be established. Magmatic activity occurred between ∼1.5 and 5 Ma after CAIs. More than 5 Ma later, intensive thermal metamorphism has redistributed Hf-W. Average cooling rates calculated for the winonaite/IAB parent asteroid range between ∼35 and ∼4 K/Ma, most likely reflecting different burial depths. Cooling rates obtained for acapulcoites were ∼40 K/Ma to ∼720 K and then ∼3 K/Ma to ∼550 K.Accretion and subsequent magmatism on the acapulcoite parent body occurred slightly later if compared to most achondrite parent bodies (e.g., angrites, ureilites and eucrites), in this case supporting the concept of an inverse correlation between accretion-age of asteroids and intensity of heating in their interiors as expected from heating by ²⁶Al and ⁶⁰Fe decay. However, the early accretion of the parent asteroid of primitive IAB silicates (∼1.0 Ma after CAIs; Schulz et al., 2009) and the possibly impact-induced melting-history of winonaites show that this concept is too simplistic. Parent body size, impact-driven melting as well as heat-insulating regolith cover also need to be considered in the early history of asteroid differentiation.     

The impact and rotational light curves of Comet 9P/Tempel 1

UVES and HIRES high-resolution spectra of Comet 9P/Tempel 1 are used to investigate the impact and rotational light curves of various species with a view toward building a simple model of the distribution and activity of the sources. The emission by OH, NH, CN, C₃, CH, C₂, NH₂, and OI, are analyzed, as well as the light scattered by the dust. It is found that a simple model reproduces fairly well the impact light curves of all species combining the production of the observed molecules and the expansion of the material throughout the slit. The impact light curves are consistent with velocities of 400-600 m/s. Their modeling requires a three-step dissociation sequence “Grand-Parent → Parent → Daughter” to produce the observed molecules. The rotational light curve for each species is explained in terms of a single model with three sources. The dust component can however not easily be explained that way.     

Das erdmagnetische Feld im Jahr 1994 nach Messungen des Erdmagnetischen Observatoriums Wingst

Ohne Zusammenfassung     

Untersuchung zur Frage der Entstehung der Eisphase aus unterkühlten Wassertropfen

Zusammenfassung Auf verschiedenen Metallspiegeln wurden durch Kondensation Tröpfchen mit Durchmessern zwischen 5 und 25 erzeugt und so lange unterkühlt, bis ihr Gefrierpunkt beobachtet werden konnte. Die Auswertung ergibt, daß der Erstarrungsvorgang an den Tropfen bei –10° C einsetzt und sich ab etwa –15° C verstärkt. Die Temperatur des häufigsten Umschlags von Wasser zu Eis liegt im Bereich zwischen –20°C und –24° C. In Übereinstimmung mitJacobi wird festgestellt, daß metallische Unterlagen das Gefrieren begünstigen, wofür zum Teil deren hohe Wärmeleitfähigkeit verantwortlich gemacht wird. Eine Abhängigkeit der beobachteten Gefriertemperatur von Tropfengröße oder Kühlgeschwindigkeit besteht nicht.

---

Summary Droplets of 5 to 25 diameter have been produced by condensation on different metallic mirrors and supercooled until congelation, which begins at –10° C and increases from –15° on with a maximum between –20° and –24°. In concert withJacobi metal support favours the freezing process, probably because of its high thermal conductivity. The freezing temperature depends neither on the size of the droplets nor on the speed of refrigeration.

---

Résumé On a obtenu par condensation sur différents miroirs métalliques des gouttelettes avec des diamètres de 5 à 25 et on les a refroidies jusqu'à congélation. Celle-ci commence à –10° C et se renforce à partir de –15° environ; elle se produit de préférence entre –20° et –24°. Le support métallique favorise, en concordance avec les résultats deJacobi, le processus de congélation en vertu probablement de sa grande conductibilité calorifique. La température de congélation ne dépend pas de la grosseur des gouttelettes ni de la vitesse de refroidissement.

---

---

Mit 9 Textabbildungen     

Ermittlung der Nachweis-, Erfassungs- und Bestimmungsgrenze nach DIN 32645 mit Hilfe eines Programms Calculation of Detection Limit,Identification Limit and Determination Limit according to DIN 32645 with the Aid of a Computer Programs

The new German standard specification DIN 32645 defines detection, identification and determination limit of analytical experiments and contains formulas for their calculation. The detection limit is a qualitative value, only at the determination limit a quantitative statement is possible. The identification limit is no limit of decision for analyses. The expenditure for calculating these parameters is considerable. Therefore, a computer program was developed and tested at the analysis of herbicides with GC-MS after enrichment with solid phase extraction (SPE). It proved that the program is also very useful at the development of analytical methods, because it allows a quick examination of changes of the analytical method. After optimization detection limits for the herbicides were achieved which amount 10–20% of the limit of the German drinking water regulation.