Methane-derived authigenic carbonates from active hydrocarbon seeps of the St. Lawrence Estuary,Canada

Nearly 2000 pockmarks with diameters ranging from a few tens of meters up to 700 m are present on the seafloor of the St. Lawrence Estuary in eastern Canada. Coring of some pockmarks resulted in the recovery of various-sized and shaped carbonate concretions in a predominantly silty mud matrix. Petrographic and geochemical data on four authigenic carbonate concretions are reported as well as data from shell material in the unconsolidated sediment. Video observations and echo-sounder images indicate that the sampled pockmarks are actively gas venting. The video images show significant look-alike microbial mats in areas where gas is venting. The carbonate concretions are primarily made up of carbonate cements with varying percentage of shell fragments, micrite particles and fine-grained clastics. Orthorhombic crystal morphology and diagenetic fabrics including isopachous layers and botryoids characterize the aragonite cement. Oxygen isotopes ratios for the cement crusts do not record any thermal anomaly at the site of precipitation with δ¹⁸O_VPDB ratios (+3‰) in equilibrium with cold (5 °C) deep marine waters, whereas significant negative δ¹³C_VPDB ratios (−9.9 to −33.5‰) for cement and shell material within concretions indicate that the carbonates largely derive from the microbial oxidation of methane. The δ¹³C_VPDB ratios of aragonite shells (−2.7 to −5.6‰) taken from unconsolidated sediments at some distance from the concretions/vents show variable dilution of HCO₃⁻ with negative δ¹³C_VPDB ratios derived from microbial oxidation of methane with isotopically normal (0‰) marine bicarbonate. These results are in agreement with other lines of evidence suggesting that pockmarks formed through the recent and still active release of gas from a reservoir within the Paleozoic sedimentary succession.     

A comparative analysis of time–depth relationships derived from scientific ocean drilling expeditions

Marine Geophysical Research - Time–depth relationships (TDR) are required for correlating geological information from drill sites with seismic reflection profiles. Conventional...     

Recent Developments in Marine Diamond Mining

The marine diamond deposits of southern Africa owe their existence to fluvial transport down the Orange River to the South Atlantic. On the coast, they were moved, sorted and concentrated by high-energy sea and wind conditions to create a veneer of diamondiferous gravels on the sea floor. Large scale, offshore production by De Beers Marine commenced in 1989 in Namibian waters. The company now acts as a contractor for Namdeb, a corporation owned jointly with the Namibian governments. Some junior public companies also produce diamonds by large-scale mechanized means and conduct extensive exploration programs. Two important developments have occurred recently. Firstly, equipment for the recovery of diamonds from the seabed has been successfully borrowed from other industries. Large drills from onshore civil engineering have been modified for marine sampling and mining. Remotely controlled, seabed-mounted, excavational systems have assumed a major role. The new systems allow both evaluation sampling and subsequent mining to be undertaken by similar or the same equipment, making the results compatible. They permit highly selective extraction and enhanced recovery of the gravels from irregular bedrock in water approaching 200 m deep. But none is universally applicable offshore, each being the preferred system under different conditions. Secondly, the total output of sea diamonds from Namibian waters has increased to 0.8 million carats annually and now exceeds that from all the country's onshore sources. An industry has become established. Corporate and individual perseverence, government encouragement, new technology, shareholders' risk finance, and De Beers' diamond marketing have all played a role in the success. Future diamond production may increase as companies meet the challenge of working lower grade, higher volume deposits, which will require new approaches to the mining process. With a decrease in the physical risk of marine mining, the most variable inputs in operational planning and production forecasting are recovered grade and throughout rate, together with equipment availability. The importance of reliable grade estimation from sufficient sampling density is widely perceived, but the greatest performance risk can involve the predicted excavation rate and ''mineability'' of the seabed sediments. Published reserve statements would benefit from a requirement to specify the planned mining method, the consequent cutoff grade to be employed, and whether or not test mining has been undertaken.     

Pore‐water pressure measurements: Mississippi delta submarine sediments

Abstract

A pore‐water pressure probe (piezometer) was implanted in Mississippi delta sediments at a preselected site (Block 28, South Pass area, 29°00´N, 89°15´W) 145 m from an offshore production platform (water depth approx. 19 m) in September 1975. Total pore‐water pressures (u_w ) were monitored for extended periods of time at depths of approximately 15 and 8 m below the mudline concurrently with hydrostatic pressures (u₈ ) measured at depths of 15 m and approximately 1 m below the mudline. Relatively high excess pore‐water pressures, u_e = (u_w ‐u₈ ), were recorded at the time of probe insertion measuring 99 kPa (14.4 psi) at 15 m and 50 kPa (7.3 psi) at 8 m. Six hours after the probe was implanted, excess pore pressures were still high at 81 kPa (11.8 psi, 15 m) and 37 kPa (5.4 psi, 8 m). Pore pressures appeared to become relatively constant at the 8‐m depth after 7 h had elapsed, and at the 15 m depth after 10–12 h. Excess pore‐water pressures averaged 72 kPa (10.4 psi, 15 m) and 32 kPa (4.6 psi, 8 m) prior to the initial effects of Hurricane Eloise, which passed in close proximity to the probe site. Significant variations in pressures were recorded during storm activity. As the effects of the storm subsided, excess pore‐water pressures began to decline slightly at the 15‐m depth; however, concurrently at the 8‐m depth, pore pressures began to increase gradually. During the period of 21–25 days after the probe was implanted, excess pore pressures appeared to become more constant, averaging 24 kPa (3.5 psi) at 15 m and 43 kPa (6.2 psi) at the 8‐m depth. The presence of methane, a common occurrence in these delta muds, may have influenced, or contributed to, the total pore‐water pressures measured during this experiment.     

Non-Energy Resources,Connecticut Coastal Waters,Year 9 and 10 Activities

The Connecticut effort in year 9 of the Continental Margins Program concentrated on a 13.6-mi2 area south of the Housatonic River. This area was chosen for a side-scan sonar survey because it lies on and adjacent to the bathymetric expressions of two fairly large, subcropping, potential sources of coarse material. Previous seismic work in the area indicated that outcrops or subcrops of these potential source deposits could be delineated using their bathymetric expression. Owing to the limited resolution of the seismic data, a correlation between bottom type and underlying source deposits could not be made with the seismics alone. Results from the November 1993 side-scan survey show that although the source deposits have discernible bathymetric expressions, they are not cropping out as much as expected. As a result, bottom type is not necessarily determined by subcropping deposits in this particular area. Year 10 work was concentrated in Fishers Island Sound, where three areas of potential interest for near-shore gravel resources had previously been identified. These areas were surveyed, during the spring of 1996, using the RoxAnn Seabed Classification System. A small video camera and a Van Veen grab sampler were used to calibrate and verify the RoxAnn data. Although previous sampling had indicated the presence of gravel or gravelly sediment in all of the survey areas, the RoxAnn results showed less gravel than anticipated. Vibrant eelgrass beds and other habitat indicators were detected in all of the survey areas. Given the variable sediment results, and the high habitat potential of the areas surveyed, the likelihood of developing a sand and gravel supply from the near shore of Fishers Island Sound appears quite low.     

Hydrothermal Vent Geology and Biology at Earth’s Fastest Spreading Rates

Earth’s fastest present seafloor spreading occurs along the East Pacific Rise near 31°–32° S. Two of the major hydrothermal plume areas discovered during a 1998 multidisciplinary geophysical/hydrothermal investigation of these mid-ocean ridge axes were explored during a 1999 Alvin expedition. Both occur in recently eruptive areas where shallow collapse structures mark the neovolcanic axis. The 31° S vent area occurs in a broad linear zone of collapses and fractures coalescing into an axial summit trough. The 32° S vent area has been volcanically repaved by a more recent eruption, with non-linear collapses that have not yet coalesced. Both sites occur in highly inflated areas, near local inflation peaks, which is the best segment-scale predictor of hydrothermal activity at these superfast spreading rates (150 mm/yr).     

Estimating the underwater light field from remote sensing of ocean color

We present a new approach that incorporates two models to estimate the underwater light field from remote sensing of ocean color. The first employs a series of analytical, semi-analytical, and empirical algorithms to retrieve the spectrum of inherent optical properties (IOPs), including the absorption and the backscatter coefficients, from the spectrum of remote sensing reflectance. The second model computes the profile of photosynthetically available radiation E _0,PAR (z) for a vertically homogeneous water column using the information of the retrieved IOPs and the ambient optical environment. This computation is based on an improved look-up table technology that possesses high accuracy, comparable with the full solution of the radiative transfer equation, and meets the computational requirement of remote sensing application. This new approach was validated by in situ measurements and an extensive model-to-model comparison with a wide range of IOPs. We successfully mapped the compensation depth by applying this new approach to process the SeaWiFS imagery. This research suggests that E _0,PAR (z) can be obtained routinely from ocean-color data and may have significant implications for the estimation of global heat and carbon budget.     

The estuarine clamRangia cuneata as a biomonitor of dioxins and furans in the Neches River,Taylor Bayou,and Fence Lake,Texas

Polychlorinated dibenzo-para-dioxins (PCDDs) and dibenzofurans (PCDFs) were measured in the tissues of the estuarine clamRangia cuneata at four sites in the Neches River that had been subjected to paper mill effluent and at two remote sites. One of the river samplings was taken before dioxin control measures and another 2 yr after the control measures began. Measurable concentrations of PCDD/Fs were present at all sites, but higher concentrations were present at the Neches River sites. Whole tissue concentrations of 2,3,7,8-tetrachlorodibenzo-para-dioxin (TCDD) and all PCDD congeners for the two collections were not significantly different (p>0.05), but lipid-normalized concentrations for the two collections were significantly different (p<0.05). Highest concentrations of PCDDs at sites located 8 km and 16 km upriver from the paper mill effluent outfall indicated that the materials were transported upriver by saltwater intrusion and/or that nonpoint sources existed upriver. The presences of PCDD/Fs in clam tissues from the remote sites also indicated that other sources of these materials existed. Even under extreme physiological conditions (spent reproductive phase, low lipid contents, water temperature 10°C; ripe reproductive phase, high lipids, water temperature 32°C)Rangia cuneata was an effective biomonitor to determine the distribution of PCDD/Fs at specific sites. *** DIRECT SUPPORT *** A01BY069 00021     

Sedimentary processes and trace metal contaminants in the buccaneer oil/gas field,northwestern gulf of Mexico

Sediments are the ultimate sink for contaminants in the marine environment, and physical processes of sedimentation influence the distribution and accumulation of these contaminants. Evaluation of contaminant levels in sediments is one approach to assessing environmental impact; data interpretation depends on consideration of sediment texture and mineralogy, however, which profoundly influence chemical composition. In this study, comparison of potentially contaminated sediments from the production field with control populations was done only within the context of similar (as to texture and organic carbon and carbonate content) sample groups as determined by cluster analysis. Ba, Cd, and Sr are identified as contaminants. Supported by the identification of a well-crystallized expandable clay—possibly bentonite—drilling fluids are a potential source of Ba. Ba and Sr may be unnaturally high because of their abundance in discharged produced formation waters, but may also be naturally controlled by the unique faunal assemblage associated with the structures. Cd is probably derived from corrosion of the structures and assorted debris on the seafloor. In general, contamination is limited to an area within 100 m of the platforms. Furthermore, substantial erosion around platforms has probably effectively removed and dispersed the bulk of the contaminants introduced into the marine environment by the offshore exploration/production operations.