Geo-engineering properties of expansive soil treated with xanthan gum biopolymer

ABSTRACT

This paper presents the effectiveness of xanthan gum (XG) biopolymer in stabilising the expansive soil. The XG biopolymer is mixed with expansive soil in different proportions such as 0%, 0.2%, 0.5%, 0.8% and 1.0% by weight of the dry soil mass. The plasticity, compaction, swelling, compressibility, hydraulic conductivity, strength and durability characteristics of the treated and un-treated expansive soil are examined. Results show that the plasticity index of the treated soil mass initially increases but beyond 0.5% biopolymer addition it decreases sharply. The optimum moisture content and maximum dry density of treated soil, found out from light and heavy compaction tests, do not follow any definite trend. It is also found that increasing XG content increases compressibility slightly but, it reduces swelling pressure, differential free swelling value and hydraulic conductivity remarkably. On the other hand, time-dependent compressive strength and resistance to mass loss increases with increasing XG content. Microscopic examination confirms the formation of gel-like linkage, which brings about the modifications in the treated expansive soil.     

Petrogenetic implications of ophiolitic chromite from Rutland Island, Andaman—a boninitic parentage in supra-subduction setting

Chromites occurring in different modes have been characterized from ophiolites of Rutland Island, a part of Burma-Andaman-Java subduction complex in the Bay of Bengal. Chromite mainly occurs as massive chromitite pods in mantle ultramafic tectonite and as thin massive chromitite bands together with minor disseminations in crustal ultramafic cumulate. Other than pods chromite also appears as: (a) anhedral restitic grains, (b) strings occurring as exsolved phases and as (c) symplectitic intergrowth with orthopyroxene in mantle tectonite. The chromites occurring as massive chromitite pods and bands contain high Cr (Cr#—73 to 80). Restitic chromite grains in mantle ultramafics are high-Mg (Mg#—58), high-Al (Al₂O₃—34 wt.%) and intermediate-Cr (Cr#—37) chromites. The bivariant plots of TiO₂ wt.% vs 100Cr#, Mg# vs Cr# and Cr-Al-Fe³⁺ ternary discrimination diagram show that the massive and disseminated chromites fall in the boninitic field. The (Al₂O₃)_melt and (FeO/MgO)_melt values for the massive chromitites are estimated as 10 wt.% to 11 wt.% and 0.67–1.78 respectively, corroborating a boninitic parentage. Massive chromitite on Fe²⁺/Fe³⁺ vs Al₂O₃ wt.% and TiO₂ wt.% vs Al₂O₃ wt.% plots occupy mainly the field of supra-subduction zone peridotites. High-Mg olivine (Fo_91?93), high-Mg orthopyroxene (En_～90) and high-Cr chromites of Rutland ophiolite are all supportive of boninitic source at supra-subduction zone setting. ⁵⁷Fe Mössbauer study of chromite of beach placer shows that chromites occur in partly inverse spinel structure with iron distribution as Fe³⁺(A)Fe²⁺(A)Fe²⁺(B) which might be a result of oxidation. The olivine-spinel geothermometry shows 650–700°C re-equilibration temperature which is much lower than near crystallization temperature (950–1,050°C) derived from orthopyroxene-clinopyroxene assemblage. At supra-subduction setting an oxidizing hydrous fluid derived from subducting slab might have a major influence during the formation of Rutland ophiolite in this part of Burma-Java subduction complex.     

Understanding the cause and effect relationship of debris slides in Papum Pare district,Arunachal Himalaya,India

Natural Hazards - Slope failures are recurrent phenomena during the Indian Summer Monsoon (ISM) season in the mountainous regions of Arunachal Himalaya, NE India, with a consequent damaging impact...     

Access to basic amenities and services to urban households in West Bengal: Does its location and size of settlements matter?

GeoJournal - Basic urban services refer to the important civic services required for the citizens of urban areas and for the functioning of cities viz., water supply, sanitation, waste management,...     

Spatio-temporal variations of respirable particles at residential areas located in the vicinity of opencast coal projects,India: a case study

The objective of the study is to investigate spatio-temporal variations of PM₁₀, PM_2.5, and PM₁ concentrations at seven residential sites, located in the vicinity of opencast coal projects, Basundhara Garjanbahal Area (BGA), India. Meteorological parameters such as wind speed, wind direction, relative humidity, and temperature were collected simultaneously with PM concentrations. Mean concentrations of PM₁₀ in the range 215 ± 169–526 ± 412 μg m^?3, PM_2.5 in the range of 91 ± 79–297 ± 107 μg m^?3, PM₁ in the range of 68 ± 60–247 ± 84 μg m^?3 were obtained. Coarse fractions (PM_2.5–10) varied from 27 to 58% whereas fine fractions (PM_1–2.5 and PM₁) varied in the range of 51–73%. PM_2.5 concentration was 41–74% of PM₁₀ concentration, PM₁ concentration was 31–62% of PM₁₀ concentration, and PM₁ concentration was 73–83% of PM_2.5 concentration. Role of meteorology on PM concentrations was assessed using correlation analysis. Linear relationships were established among PM concentrations using least square regression analysis. With the aid of principal component analysis, two components were drawn out of eight variables, which represent more than 75% of variance. The results indicated that major sources of air pollutants (PM₁₀, PM_2.5, PM₁, CO, CO₂) at the residential sites are road dust raised by vehicular movement, spillage of coal generated during transportation, spontaneous combustion of coal, and biomass burning in village area.     

Environmental pollution impact on water and sediments of Kumaun lakes, Lesser Himalaya, India: a comparative study

A study of the water and sediment chemistry of the Nainital, Bhimtal, Naukuchiyatal and Sattal Lakes of Kumaun, has shown that the water of these lakes are alkaline and that electrical conductivity, total dissolved solid and bicarbonate HCO ₃ ⁻ are much higher in Nainital than in the other three lakes. The weathering of limestone lithology and anthropogenic pollution, the latter due to the very high density of population in the Nainital valley, are the primary sources of enhanced parameters. The low pH of Nainital Lake water is due to low photosynthesis and enhanced respiration, increasing CO₂ in the water and the consequent enhancement of Ca²⁺ and HCO ₃ ⁻ . The dissolved oxygen in Nainital Lake is less compared to other lakes, indicating anoxic conditions developing at the mud–water interface at depth. The PO ₄ ³⁻ content in Nainital is higher (124 μg/l), showing an increasing trend over time leading to eutrophic conditions. The trace metals (Cu, Co, Zn, Ni, Mn, and Sr) are present in greater amounts in the water of Nainital Lake than in the other three lakes, though Fe and Cr are high in Bhimtal and Fe in Naukuchiyatal. The higher abundance is derived from the leaching of Fe–Mg from metavolcanic and metabasic rocks. Most of the heavy metals (Cr, Ni, Cu, Mn, Fe, Sr, and Zn) significantly enrich the suspended sediments of the lakes compared to the bed sediments which due to their adsorption on finer particles and owing to multiple hydroxide coating and organic content, except for Fe, which is enriched in the bed sediments. The high rate of sedimentation, 11.5 mm/year in Nainital, compared to Bhimtal with 4.70 mm/year, Naukuchiyatal with 3.72 mm/year, and Sattal with 2.99 mm/year, has resulted in shorter residence time, poor sorting of grains, and lesser adsorption of heavy metals, leading consequently, their depletion in the bed sediments of Nainital Lake.     

GIS-based vulnerability mapping of the coastal stretch from Puri to Konark in Odisha using analytical hierarchy process

Natural Hazards - The 485-km-long coastline of Odisha, a state in the northeastern part of the Indian peninsula, is potentially vulnerable to several disaster events that take place frequently. In...     

Bacterial biosurfactants can be an ecofriendly and advanced technology for remediation of heavy metals and co-contaminated soil

Environmental pollution due to heavy metals has become a significant drawback as a result of their ecotoxicity. Hence, their remediation is of pressing concern. Many technologies are planned for their remediation; however, most of them are highly expensive and result in incomplete removal of contaminants. So, massive attention has paid to the event and application of the latest biologically techniques, that is effective in remedy and cost, not harming the prevailing surroundings. Hence, application of biosurfactant in heavy metal remediation is one among the recent ecofriendly technique. The present review critically highlights bacterial biosurfactants as a best alternative technique for heavy metals remediation. The review also emphasizes that bacterial biosurfactants can open up a new vista in remediation of metal-contaminated soil.     

Numerical simulation of physical and dynamical characteristics associated with the severe thunderstorm on April 5, 2015 at Kushtia and Jhenaidah

The paper deals with the study of the physical and dynamical characteristics of a severe thunderstorm, which had occurred on April 5, 2015, at about 2100 UTC in the southwestern Bangladesh with location around 23.3–23.7N and 89.0–89.4E within the upazilas (sub-districts) of Kumarkhali and Shailkupa under the districts of Kushtia and Jhenaidah, respectively. The thunderstorm was associated with numerous hails of large size. More than 5000 birds which used to live in the bird sanctuary at Shailkupa and 22,011 birds in Chhaglapara Bird Sanctuary of Kumarkhali died as they were hit by the hails. Large hails also damaged crops, houses and forests over the thunderstorm hit areas. The evolution of the thunderstorm is studied by the WRF model, which is initialized using the National Centers for Environmental Prediction Final reanalysis data of 0000 UTC of April 5, 2015. The simulated results provide a basis to study the physical and dynamical characteristics of the thunderstorm, which are generally not identified by the meteorological observations which are too sparse. The model has captured a micro-low over Kumarkhali and its neighborhood, which favored the occurrence of the severe thunderstorm. The model simulated rainfall is about 26 mm near the place of occurrence, which matches well with the area where the reflectivity of hydrometeor is maximum. The convective available potential energy is found to be 1600 J kg^?1 at 1730 UTC near the place of occurrence of the thunderstorm; this indicates high atmospheric instability over the thunderstorm location for the formation of the thunderstorm. The vertical velocity, convergence, cloud water mixing ratio and the ice water mixing ratio and their vertical extensions are found to be satisfactory and responsible for the occurrence of large hails associated with the thunderstorm.