Observations on sandbar behaviour along a man‐made curved coast

Sandbars, submerged ridges of sand parallel to the shoreline, affect surfzone circulation, beach topography and beach width. Under time‐varying wave forcing, sandbars may migrate onshore and offshore, referred to as two‐dimensional (2D) behaviour, and vary in planshape from alongshore uniform ridges to alongshore non‐uniform ridges through the growth and decay of three‐dimensional (3D) patterns, referred to as 3D behaviour. Although 2D and 3D sandbar behaviour is reasonably well understood along straight coasts, this is not the case for curved coasts, where the curvature can invoke spatial variability in wave forcing. Here, we analyse sandbar behaviour along the ～3000 m man‐made curved coastline of the Sand Engine, Netherlands, and determine the wave conditions governing this behaviour. 2D and 3D behaviour was quantified within a box north and west of the Sand Engine's tip, respectively, using a 2.4‐year dataset of daily low‐tide video images and a sparser bathymetric dataset. The northern and western sides behaved similarly in terms of 2D behaviour, with seasonal onshore and offshore migration, resulting in a stable position on inter‐annual timescales. However, both sandbar geometry and 3D behaviour differed substantially between both sides. The geometric differences (bar shape, bar crest depth and wavelength of 3D patterns) are consistent with computed alongshore differences in breaker height due to refraction. The differences in the timing in growth, decay and morphological coupling of 3D patterns in the sandbar and shoreline are likely related to differences in the local wave angle, imposed by the curved coast. Similar dependency of bar behaviour on local wave height and angle may be expected elsewhere along curved coasts, e.g. shoreline sandwaves, cuspate forelands or embayed beaches. Copyright © 2017 John Wiley & Sons, Ltd.     

Modelling the Effect of Tree Foliage on Sprayer Airflow in Orchards

The effect of tree foliage on sprayer airflow through pear trees in a fruit orchard was studied and modelled in detail. A new three-dimensional (3-D) computational fluid dynamics model that integrates the 3-D canopy architecture with a local closure model to simulate the effect of the stem and branches and leaves of trees separately on airflow was developed. The model was validated with field observations made in an experimental orchard (pcfruit, Sint-Truiden, Belgium) in spring and summer 2008 and was used to investigate the airflow from three air-assisted orchard sprayers (Condor V, Duoprop and AirJet quatt). Velocity magnitudes were measured before and behind leafless and fully-leafed pear canopies across the row while the operating sprayers are passing along the row, and were compared with the simulations. The simulation results predicted the measured values well with all the local relative errors within 20%. The effect of foliar density on airflow from the three air assisted sprayers was manifested by changing the magnitude and direction of the sprayers’ air velocity behind the canopy, especially at the denser regions of the canopy and by changing the pattern of velocity decay horizontally along the jet. The developed methodology will also allow a thorough investigation of atmospheric airflow in canopy structures.     

Hydrologic Dynamics of a Subtropical Estuary Using Geochemical Tracers,Celestún,Yucatan, Mexico

Oxygen isotopes and strontium concentrations were used as geochemical tracers to discern the sources of water to Celestún Lagoon, a small subtropical estuary on the western side of the Yucatán Peninsula of Mexico. Celestún Lagoon is underlain by karstified limestone with numerous locations where groundwater is observed discharging directly to the lagoon. In this study, samples of groundwater, lagoon surface water, and seawater (SW) were collected in April 2008 and June 2009 and analyzed for salinity, stable isotopes of oxygen, and strontium (Sr²⁺) concentrations. These geochemical tracers were used in two tertiary mixing models to calculate the relative ratio inputs of fresh groundwater, brackish groundwater, and SW to the lagoon. Two sources of groundwater were found to contribute to the surface water in the lagoon; one fresh and the other brackish with an average salinity of 19 psu. The fresh groundwater had an oxygen isotopic signature (δ¹⁸O) and strontium concentration (Sr²⁺) of δ¹⁸O?=?-3.30‰ and Sr²⁺?=?0.03 mmol/l, respectively. The brackish groundwater observed in the northern end of the lagoon add a dissimilar oxygen isotopic signature and Sr²⁺ concentration of δ¹⁸O?=?3.01‰ and Sr²⁺?=?0.12 mmol/l, respectively. Local SW had an isotopic oxygen signature and Sr²⁺ concentration between the two fresher sources (δ¹⁸O?=?1.40‰, Sr²⁺?=?0.09 mmol/l). The lagoonwide results of the two tracer mixing models (δ¹⁸O and Sr²⁺) agreed well (within 5 %) and indicated a ratio of brackish groundwater–fresh groundwater– SW of 31 %–26 %–43 % (±5 %) for the Sr²⁺ model and 35 %–25 %–40 % (± 5 %) for the δ¹⁸O model. Brackish groundwater is dominant in the northern portion of the lagoon, while SW dominates the southern portion. Fresh groundwater discharge is a significant contributor of water along the entire eastern boundary of the lagoon where mangrove forests are the dominant vegetation.     

Sea‐level changes,river activity,soil development and glaciation around the western margins of the southern North Sea Basin during the Early and early Middle Pleistocene: evidence from Pakefield,Suffolk, UK

This paper outlines evidence from Pakefield (northern Suffolk), eastern England, for sea‐level changes, river activity, soil development and glaciation during the late Early and early Middle Pleistocene (MIS 20–12) within the western margins of the southern North Sea Basin. During this time period, the area consisted of a low‐lying coastal plain and a shallow offshore shelf. The area was drained by major river systems including the Thames and Bytham. Changes in sea‐level caused several major transgressive–regressive cycles across this low‐relief region, and these changes are identified by the stratigraphic relationship between shallow marine (Wroxham Crag Formation), fluvial (Cromer Forest‐bed and Bytham formations) and glacial (Happisburgh and Lowestoft formations) sediments. Two separate glaciations are recognised—the Happisburgh (MIS 16) and Anglian (MIS 12) glaciations, and these are separated by a high sea level represented by a new member of the Wroxham Crag Formation, and several phases of river aggradation and incision. The principal driving mechanism behind sea‐level changes and river terrace development within the region during this time period is solar insolation operating over 100‐kyr eccentricity cycles. This effect is achieved by the impact of cold climate processes upon coastal, river and glacial systems and these climatically forced processes obscure the neotectonic drivers that operated over this period of time. © British Geological Survey/Natural Environment Research Council copyright 2005. Reproduced with the permission of BGS/NERC. Published by John Wiley & Sons, Ltd.     

Detailuntersuchungen an gotländischen Riffen

Zusammenfassung Silurische Riffe von Gotland wurden im Detail untersucht. Es fand Biohermbildung in einem warmen, untiefen, epikontinentalen Flachmeere statt. Verschiedene Typen von Riffen werden beschrieben. Unterschiede zu den heutigen Riffen, dem heutigen reef complex, und den Riffen geosynklinaler Faziesbereiche gegenüber werden diskutiert.     

Chemical characterization and multivariate analysis of atmospheric PM<Subscript>2.5</Subscript> particles

The new European Council Directive (PE-CONS 3696/07) frames the inhalable (PM₁₀) and fine particles (PM_2.5) on priority to chemically characterize these fractions in order to understand their possible relation with health effects. Considering this, PM_2.5 was collected during four different seasons to evaluate the relative abundance of bulk elements (Cl, S, Si, Al, Br, Cu, Fe, Ti, Ca, K, Pb, Zn, Ni, Mn, Cr and V) and water soluble ions (F⁻, Cl⁻, NO₂ ⁻, NO₃ ⁻, SO₄ ²⁻, Na⁺, NH₄ ⁺, Ca²⁺ and Mg²⁺) over Menen, a Belgian city near the French border. The air quality over Menen is influenced by industrialized regions on both sides of the border. The most abundant ionic species were NO₃ ⁻, SO₄ ²⁻ and NH₄ ⁺, and they showed distinct seasonal variation. The elevated levels of NO₃ ⁻ during spring and summer were found to be related to the larger availability of the NO_x precursor. The various elemental species analyzed were distinguished into crustal and anthropogenic source categories. The dominating elements were S and Cl in the PM_2.5 particles. The anthropogenic fraction (e.g. Zn, Pb, and Cu) shows a more scattered abundance. Furthermore, the ions and elemental data were also processed using principal component analysis and cluster analysis to identify their sources and chemistry. These approach identifies anthropogenic (traffic and industrial) emissions as a major source for fine particles. The variations in the natural/anthropogenic fractions of PM_2.5 were also found to be a function of meteorological conditions as well as of long-range transport of air masses from the industrialized regions of the continent. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Sample return of interstellar matter (SARIM)

The scientific community has expressed strong interest to re-fly Stardust-like missions with improved instrumentation. We propose a new mission concept, SARIM, that collects interstellar and interplanetary dust particles and returns them to Earth. SARIM is optimised for the collection and discrimination of interstellar dust grains. Improved active dust collectors on-board allow us to perform in-situ determination of individual dust impacts and their impact location. This will provide important constraints for subsequent laboratory analysis. The SARIM spacecraft will be placed at the L2 libration point of the Sun–Earth system, outside the Earth’s debris belts and inside the solar-wind charging environment. SARIM is three-axes stabilised and collects interstellar grains between July and October when the relative encounter speeds with interstellar dust grains are lowest (4 to 20 km/s). During a 3-year dust collection period several hundred interstellar and several thousand interplanetary grains will be collected by a total sensitive area of 1 m². At the end of the collection phase seven collector modules are stored and sealed in a MIRKA-type sample return capsule. SARIM will return the capsule containing the stardust to Earth to allow for an extraction and investigation of interstellar samples by latest laboratory technologies.     

ToF-SIMS and SEM study on the preferential oxidation of chalcopyrite

Chalcopyrite is known to be slow reacting mineral in hydrometallurgical systems and is considered one of the most inert sulphide minerals with respect to leaching. Such character of chalcopyrite seems to be linked to a formation of a passive layer on its surface. This work reports that freshly fractured chalcopyrite surfaces exhibit highly selective reactivity depending on the exposed fracture planes. ToF-SIMS was used to qualitatively characterize various fracture planes in freshly fractured chalcopyrite particles, prior to and after hydrometallurgical treatment. It was found that, prior to treatment, certain areas exhibited pronounced contamination from atmospheric hydrocarbons; whereas, others were highly unreactive and remarkably free from adventitious hydrocarbon contamination. The positive ion spectra recorded from these areas were found to be dominated by peaks from Fe- and Cu-elements and related compounds. The negative ion spectra for the reactive areas on the other hand showed a high content of oxidized (sulphur) species.The differences between the areas of low and high reactivity, as detected after leaching, were more subtle than prior to leaching; whereas, SEM analysis showed clear evidence for selective attack of ferric sulphate to specific planes. Furthermore, it was shown that, when chalcopyrite is in intimate contact with pyrite, it experiences an enhanced oxidation compared to when there is no electric contact with pyrite.Attempts were made to explain the preferential oxidation observed based on the different chemistry of the fracture surfaces.