Age and geochemistry of the Newania dolomite carbonatites, India: implications for the source of primary carbonatite magma

The Newania carbonatite complex of India is one of the few dolomite-dominated carbonatites of the world. Intruding into Archean basement gneisses, the rocks of the complex have undergone limited diversification and are not associated with any alkaline silicate rock. Although the magmatic nature of the complex was generally accepted, its age of emplacement had remained equivocal because of the disturbed nature of radioisotope systems. Many questions about the nature of its mantle source and mode of origin had remained unanswered because of lack of geochemical and isotopic data. Here, we present results of our effort to date the complex using ¹⁴⁷Sm–¹⁴³Nd, ²⁰⁷Pb–²⁰⁶Pb and ⁴⁰Ar–³⁹Ar dating techniques. We also present mineral chemistry, major and trace element geochemistry and Sr–Nd isotopic ratio data for these carbonatites. Our age data reveal that the complex was emplaced at ~1,473 Ma and parts of it were affected by a thermal event at ~904 Ma. The older ²⁰⁷Pb–²⁰⁶Pb ages reported here (~2.4 Ga) and by one earlier study (~2.3 Ga; Schleicher et al. Chem Geol 140:261–273, 1997) are deemed to be a result of heterogeneous incorporation of crustal Pb during the post-emplacement thermal event. The thermal event had little effect on many magmatic signatures of these rocks, such as its dolomite–magnesite–ankerite–Cr-rich magnetite–magnesio-arfvedsonite–pyrochlore assemblage, mantle like δ¹³C and δ¹⁸O and typical carbonatitic trace element patterns. Newania carbonatites show fractional crystallization trend from high-Mg to high-Fe through high-Ca compositions. The least fractionated dolomite carbonatites of the complex possess very high Mg# (≥80) and have similar major element oxide contents as that of primary carbonatite melts experimentally produced from peridotitic sources. In addition, lower rare earth element (and higher Sr) contents than a typical calcio-carbonatite and mantle like Nb/Ta ratios indicate that the primary magma for the complex was a magnesio-carbonatite melt and that it was derived from a carbonate bearing mantle. The Sr–Nd isotopic data suggest that the primary magma originated from a metasomatized lithospheric mantle. Trace element modelling confirms such an inference and suggests that the source was a phlogopite bearing mantle, located within the garnet stability zone.     

Geothermal energy potential of Tulsishyam thermal springs of Gujarat,India

Tulsishyam thermal springs are located in the Saurashtra region of Gujarat, India with discharge temperatures varying from 39 to 42 °C. The pH of these thermal springs varies from 7.1 to 7.4, indicating neutral character. Though these thermal springs propagate through the near surface layer of Deccan basalt, detailed geochemical analysis of the thermal waters using Piper diagram suggests that the water is interacting with the granitic basement rock. Silica and cation geothermometry estimates have reservoir temperature in the range of 138 to 207 °C categorizing it into a low to moderate enthalpy geothermal system. Furthermore, the area has high heat flow values of 53–90 mW/m² because of shallow Moho depth. The prevailing conditions suggest that the geothermal energy can potentially be exploited through an enhanced geothermal system (EGS). The study also indicates different mineral phases that may precipitate out of water during exploitation of geothermal energy and it should be taken into account while designing an EGS for the area.     

Static deformation of two welded half-spaces due to very long strike-slip dislocations

Closed form analytic expressions for displacement and stresses at any point of either of the two homogeneous, isotropic, perfectly elastic half-spaces in welded contact due to very long strike-slip dislocations are obtained. Both cases of vertical and horizontal strike-slip dislocations are discussed in detail. Variation of the displacement with horizontal distance from the fault and with vertical distance from the interface for a vertical strike-slip fault is studied numerically.     

Measurement of radon exhalation rate in various building materials and soil samples

Indoor radon is considered as one of the potential dangerous radioactive elements. Common building materials and soil are the major source of this radon gas in the indoor environment. In the present study, the measurement of radon exhalation rate in the soil and building material samples of Una and Hamirpur districts of Himachal Pradesh has been done with solid state alpha track detectors, LR-115 type-II plastic track detectors. The radon exhalation rate for the soil samples varies from 39.1 to 91.2 mBq kg^?1 h^?1 with a mean value 59.7 mBq kg^?1 h^?1. Also the radium concentration of the studied area is found and it varies from 30.6 to 51.9 Bq kg^?1 with a mean value 41.6 Bq kg^?1. The exhalation rate for the building material samples varies from 40.72 (sandstone) to 81.40 mBq kg^?1 h^?1 (granite) with a mean value of 59.94 mBq kg^?1 h^?1.     

Diagnostics of subseasonal prediction biases of the Asian summer monsoon by the NCEP climate forecast system

Biases of subseasonal prediction of the Asian summer monsoon are diagnosed using daily data from the hindcasts of 45-day integrations by the National Centers for Environmental Prediction Climate Forecast System version 2. The retrospective forecasts often show apparent systematic biases, which are mostly represented by the underestimation of the whole Asian monsoon. Biases depend not only on lead time, but also on the stage of monsoon evolution. An abrupt turning point of bias development appears around late June and early July, when ensemble spread and bias growth of winds and precipitation show a significant change over the northwestern Pacific (NWP) and the South Asian summer monsoon (SASM) region. The abrupt turning of bias development of winds, precipitation, and surface temperature is also captured by the first two modes of multivariate empirical orthogonal function analysis. Several features appear associated with the abrupt change in bias development: the western Pacific subtropical high (WPSH) begins its first northward jump and the surface temperature over the Tibetan Plateau commences a transition from warm bias to cold bias, and a reversal of surface temperature biases occurs in the eastern tropical Indian Ocean and the SASM region. The shift of WPSH position and the transition of surface thermal bias show close relationships with the formation of bias centers in winds and precipitation. The rapid growth in bias due to the strong internal atmospheric variability during short leads seems to mainly account for the weak WPSH and SASM in the model. However, at certain stages, particularly for longer-lead predictions, the biases of slowly varying components may also play an important role in bias development of winds and precipitation.     

Static deformation of two welded monoclinic elastic half-spaces due to a long inclined strike-slip fault

Static deformation of two monoclinic elastic half-spaces in welded contact due to a long inclined strike-slip fault situated in one of the half-spaces is studied analytically and numerically. Closed-form algebraic expressions for the displacement at any point of the medium are obtained. The variation of the displacement at the interface with the horizontal distance from the fault is studied. The effect of anisotropy on the displacement field is examined. It is found that while the anisotropy of the source half-space has a significant effect on the displacement at the interface, the anisotropy of the other half-space has only a marginal effect.     

An analytical source function for a coupled hybrid wave model

An analytical form for the source function is formulated by comparing the fetch-limited approximation of the Ocean Wave Transport equation and the empirical equation for the fetch-dependent wave forecast nomograms. The source function thus generated has been utilised in the numerical model based on Toba’s formulation of wave transport equation and tested for the seas around the Indian subcontinent (5°S to 25°N latitude; 45°E to 100°E longitude). The grid averaged hindcast wave heights are found to be moderately matching with the GEOSAT altimeter measured significant wave heights of the 1987–1989 period, particularly for waves higher than 1 meter.     

Effects of historical and projected land use/cover change on runoff and sediment yield in the Netravati river basin,Western Ghats,India

In this study, the effects of changes in historical and projected land use land cover (LULC) on monthly streamflow and sediment yield for the Netravati river basin in the Western Ghats of India are explored using land use maps from six time periods (1972, 1979, 1991, 2000, 2012, and 2030) and the soil and water assessment tool (SWAT). The LULC for 2030 is projected using the land change modeller with the assumption of normal growth. The sensitivity analysis, model calibration, and validation indicated that the SWAT model could reasonably simulate streamflow and sediment yield in the river basin. The results showed that the spatial extent of the LULC classes of urban (1.80–9.96%), agriculture (31.38–55.75%), and water bodies (1.48–2.66%) increased, whereas that of forest (53.04–27.03%), grassland (11.17–4.41%), and bare land (1.09–0.16%) decreased from 1972 to 2030. The streamflow increased steadily (7.88%) with changes in LULC, whereas the average annual sediment yield decreased (0.028%) between 1972 and 1991 and increased later (0.029%) until 2012. However, it may increase by 0.43% from 2012 to 2030. The results indicate that LULC changes in urbanization and agricultural intensification have contributed to the increase in runoff, amounting to 428.65 and 58.67 mm, respectively, and sediment yield, amounting to 348 and 43 ton/km², respectively, in the catchment area from 1972 to 2030. The proposed methodology can be applied to other river basins for which temporal digital LULC maps are available for better water resource management plans.