Influence of small-scale heterogeneities on contaminant transport in fractured crystalline rock

We present a sequence of purely advective transport models that demonstrate the influence of small-scale geometric inhomogeneities on contaminant transport in fractured crystalline rock. Special weight is placed on the role of statistically generated variable fracture apertures. The fracture network geometry and the aperture distribution are based on information from an in situ radionuclide retardation experiment performed at Grimsel test site (Swiss Alps). The obtained breakthrough curves are fitted with the advection dispersion equation and continuous-time random walks (CTRW). CTRW is found to provide superior fits to the late-arrival tailing and is also found to show a good correlation with the velocity distributions obtained from the hydraulic models. The impact of small-scale heterogeneities, both in fracture geometry and aperture, on transport is shown to be considerable.     

An evaluation of the Wellington Regional Genuine Progress Index

There is widespread discontent with the gross domestic product (GDP) as a measure of progress for society. Alternative measures have been proposed, including the genuine progress indicator (GPI). This paper examines the changing institutional arrangements and attitudinal context in the recently developed Wellington region (New Zealand) GPI. We found an alignment between the GPI framework and the Local Government Act. Despite this fit, we identified challenges, including the need to revitalise public participation through deliberative techniques. It remains too early to judge whether the GPI initiative will launch a viable alternative to the GDP for the Wellington region.     

Boundary-Layer Similarity Under an Axisymmetric,Gradient Wind Vortex

We present similarity solutions for the mean boundary-layer profiles under an axisymmetric vortex that is in gradient wind balance; the similarity model includes the nonlinear momentum advection and curvature terms. These solutions are a generalization of the Ekman layer mean flow, which is the canonical boundary-layer basic state under a uniform, geostrophically-balanced flow. Near-surface properties such as inflow angle, surface wind factor, diffusive transport of kinetic energy into the surface layer and dissipational heating are calculated and shown to be sensitive to the choice of turbulence parameterization.     

Chemical evolution with radial mixing

Models of the chemical evolution of our Galaxy are extended to include radial migration of stars and flow of gas through the disc. The models track the production of both iron and α-elements. A model is chosen that provides an excellent fit to the metallicity distribution of stars in the Geneva–Copenhagen survey (GCS) of the solar neighbourhood and a good fit to the local Hess diagram. The model provides a good fit to the distribution of GCS stars in the age–metallicity plane, although this plane was not used in the fitting process. Although this model's star formation rate is monotonically declining, its disc naturally splits into an α-enhanced thick disc and a normal thin disc. In particular, the model's distribution of stars in the ([O/Fe], [Fe/H]) plane resembles that of Galactic stars in displaying a ridge line for each disc. The thin-disc's ridge line is entirely due to stellar migration, and there is the characteristic variation of stellar angular momentum along it that has been noted by Haywood in survey data. Radial mixing of stellar populations with high  σ _z   from inner regions of the disc to the solar neighbourhood provides a natural explanation of why measurements yield a steeper increase of  σ _z   with age than predicted by theory. The metallicity gradient in the interstellar medium is predicted to be steeper than in earlier models, but appears to be in good agreement with data for both our Galaxy and external galaxies. The models are inconsistent with a cut-off in the star formation rate at low gas surface densities. The absolute magnitude of the disc is given as a function of time in several photometric bands, and radial colour profiles are plotted for representative times.     

GETEMME—a mission to explore the Martian satellites and the fundamentals of solar system physics

GETEMME (Gravity, Einstein??s Theory, and Exploration of the Martian Moons?? Environment), a mission which is being proposed in ESA??s Cosmic Vision program, shall be launched for Mars on a Soyuz Fregat in 2020. The spacecraft will initially rendezvous with Phobos and Deimos in order to carry out a comprehensive mapping and characterization of the two satellites and to deploy passive Laser retro-reflectors on their surfaces. In the second stage of the mission, the spacecraft will be transferred into a lower 1500-km Mars orbit, to carry out routine Laser range measurements to the reflectors on Phobos and Deimos. Also, asynchronous two-way Laser ranging measurements between the spacecraft and stations of the ILRS (International Laser Ranging Service) on Earth are foreseen. An onboard accelerometer will ensure a high accuracy for the spacecraft orbit determination. The inversion of all range and accelerometer data will allow us to determine or improve dramatically on a host of dynamic parameters of the Martian satellite system. From the complex motion and rotation of Phobos and Deimos we will obtain clues on internal structures and the origins of the satellites. Also, crucial data on the time-varying gravity field of Mars related to climate variation and internal structure will be obtained. Ranging measurements will also be essential to improve on several parameters in fundamental physics, such as the Post-Newtonian parameter ?? as well as time-rate changes of the gravitational constant and the Lense-Thirring effect. Measurements by GETEMME will firmly embed Mars and its satellites into the Solar System reference frame.     

Characterizing Io’s Pele,Tvashtar and Pillan plumes: Lessons learned from Hubble

Hubble Space Telescope/Wide Field and Planetary Camera 2 (HST/WFPC2) images of Io obtained between 1995 and 2007 between 0.24 and 0.42 μm led to the detection of the Pele plume in reflected sunlight in 1995 and 1999; imaging of the Pele plume via absorption of jovian light in 1996 and 1999; detection of the Prometheus-type Pillan plume in reflected sunlight in 1997; and detection of the 2007 Pele-type Tvashtar plume eruption in reflected sunlight and via absorption of jovian light. Based on a detailed analysis of these observations we characterize and compare the gas and dust properties of each of the detected plumes. In each case, the brightness of the plumes in reflected sunlight is less at 0.26 μm than at 0.33 μm. Mie scattering analysis of the wavelength dependence of each plume’s reflectance signature suggests that range of particle sizes within the plumes is quite narrow. Assuming a normal distribution of particle sizes, the range of mean particle sizes is ～0.035–0.12 μm for the 1997 Pillan eruption, ～0.05–0.08 μm for the 1999 Pele and 2007 Tvasthar plumes, and ～0.05–0.11 μm for the 1995 Pele plume, and in each case the standard deviation in the particle size distribution is <15%. The Mie analysis also suggests that the 2007 Tvashtar eruption released ～10⁹ g of sulfur dust, the 1999 Pele eruption released ～10⁹ g of SO₂ dust, the 1997 Pillan eruption released ～10¹⁰ g of SO₂ dust, and the 1995 Pele plume may have released ～10¹⁰ g of SO₂ dust. Analysis of the plume absorption signatures recorded in the F255W filter bandpass (0.24–0.28 μm) indicates that the opacity of the 2007 Tvashtar plume was 2× that of the 1996 and 1999 Pele plume eruptions. While the sulfur dust density estimated for the Tvashtar from the reflected sunlight data could have produced 61% of the observed plume opacity, <10% of the 1999 Pele F255W plume opacity could have resulted from the SO₂ dust detected in the eruption. Accounting for the remaining F255W opacity level of the Pele and Tvasthar plumes based on SO₂ and S₂ gas absorption, the SO₂ and S₂ gas density inferred for each plume is almost equivalent corresponding to ～2–6 × 10¹⁶ cm^?2 and 3–5 × 10¹⁵ cm^?2, respectively, producing SO₂ and S₂ gas resurfacing rates ～0.04–0.2 cm yr^?1 and 0.007–0.01 cm yr^?1; and SO₂ and S₂ gas masses ～1–4 × 10¹⁰ g and ～2–3 × 10⁹ g; for a total dust to gas ratio in the plumes ～10^?1–10^?2. The 2007 Tvashtar plume was detected by HST at ～380 ± 40 km in both reflected sunlight and absorbed jovian light; in 1999, the detected Pele plume altitude was 500 km in absorbed jovian light, but in reflected sunlight the detected height was ～2× lower. Thus, for the 1999 Pele plume, similar to the 1979 Voyager Pele plume observations, the most efficient dust reflections occurred in the region closest to the plume vent. The 0.33–0.42 μm brightness of the 1997 Pillan plume was 10–20× greater than the Pele or Tvashtar plumes, exceeding by a factor of 3 the average brightness levels observed within 200 km of 1979 Loki eruption vent. But, the 0.26 μm brightness of the 1997 Pillan plume in reflected sunlight was significantly lower than would be predicted by the dust scattering model. Presuming that the 0.26 μm brightness of the 1997 Pillan plume was attenuated by the eruption plume’s gas component, then an SO₂ gas density ～3–6 × 10¹⁸ cm^?2 is inferred from the data (for S₂/SO₂ ratios ?4%), comparable to the 0.3–2 × 10¹⁸ cm^?2 SO₂ density detected at Loki in 1979 (Pearl, J.C. et al. [1979]. Nature 280, 755; Lellouch et al., 1992), and producing an SO₂ gas mass ～3–8 × 10¹¹ g and an SO₂ resurfacing rate ～8–23 cm yr^?1. These results confirm the connection between high (?10¹⁷ cm^?2) SO₂ gas content and plumes that scatter strongly at nearly blue wavelengths, and it validates the occurrence of high density SO₂ gas eruptions on Io. Noting that the SO₂ gas content inferred from a spectrum of the 2003 Pillan plume was significantly lower ～2 × 10¹⁶ cm^?2 (Jessup, K.L., Spencer, J., Yelle, R. [2007]. Icarus 192, 24–40); and that the Pillan caldera was flooded with fresh SO₂ frost/slush just prior to the 1997 Pillan plume eruption (Geissler, P., McEwen, A., Phillips, C., Keszthelyi, L., Spencer, J. [2004a]. Icarus 169, 29–64; Phillips, C.B. [2000]. Voyager and Galileo SSI Views of Volcanic Resurfacing on Io and the Search for Geologic Activity at Europa. Ph.D. Thesis, Univ. of Ariz., Tucson); we propose that the density of SO₂ gas released by this volcano is directly linked to the local SO₂ frost abundance at the time of eruption.     

Radar Backscatter from Underdense Meteors and Diffusion Rates

Many meteoroids burn up between about 120 km and 70 km, deposit metals and dust and form ionized trails which are detected by radars. Model studies about the influence of neutral or positively charged background dust on the ambipolar diffusion indicate that significant smaller decay times should be observed for weak meteor echoes compared to strong meteor echoes which can affect the estimation of temperatures. The variation of meteor decay times in dependence on echo strength, height, and season was studied using radar observations at 69° N, 22° S, and 67° S. Significantly reduced decay times were found for weak echoes below about 88 km at low latitudes throughout the year, and at high latitudes with the exception of summer. In summer at high latitudes, decreasing decay times of weak and strong meteors are observed at altitudes below about 85 km during the appearance of noctilucent clouds. The impact of reduced decay times on the estimation of neutral temperatures from decay times is discussed.     

Radar topography of domes on planetary surfaces

We investigate the possibility of measuring the heights and morphology of viscously emplaced domes using radar imagery. We accurately reproduce the known height and shape of a terrestrial salt dome, and estimate the heights of several venusian pancake domes to within a factor of two. The terrestrial salt dome is consistent with a Bingham flow, while the much larger venusian pancake domes are consistent with a Newtonian flow. Applying the same techniques to Ganesa Macula, a potential cryovolcanic dome on Titan, we estimate a height between 2.0-4.9 km. Additional factors such as variable roughness and composition might account for some of the discrepancies observed.