Robust dual‐sensor data sea‐surface ghost attenuation for quality control purposes

Three‐dimensional receiver ghost attenuation (deghosting) of dual‐sensor towed‐streamer data is straightforward, in principle. In its simplest form, it requires applying a three‐dimensional frequency–wavenumber filter to the vertical component of the particle motion data to correct for the amplitude reduction on the vertical component of non‐normal incidence plane waves before combining with the pressure data. More elaborate techniques use three‐dimensional filters to both components before summation, for example, for ghost wavelet dephasing and mitigation of noise of different strengths on the individual components in optimum deghosting. The problem with all these techniques is, of course, that it is usually impossible to transform the data into the crossline wavenumber domain because of aliasing. Hence, usually, a two‐dimensional version of deghosting is applied to the data in the frequency–inline wavenumber domain. We investigate going down the “dimensionality ladder” one more step to a one‐dimensional weighted summation of the records of the collocated sensors to create an approximate deghosting procedure. We specifically consider amplitude‐balancing weights computed via a standard automatic gain control before summation, reminiscent of a diversity stack of the dual‐sensor recordings. This technique is independent of the actual streamer depth and insensitive to variations in the sea‐surface reflection coefficient. The automatic gain control weights serve two purposes: (i) to approximately correct for the geometric amplitude loss of the Z data and (ii) to mitigate noise strength variations on the two components. Here, Z denotes the vertical component of the velocity of particle motion scaled by the seismic impedance of the near‐sensor water volume. The weights are time‐varying and can also be made frequency‐band dependent, adapting better to frequency variations of the noise. The investigated process is a very robust, almost fully hands‐off, approximate three‐dimensional deghosting step for dual‐sensor data, requiring no spatial filtering and no explicit estimates of noise power. We argue that this technique performs well in terms of ghost attenuation (albeit, not exact ghost removal) and balancing the signal‐to‐noise ratio in the output data. For instances where full three‐dimensional receiver deghosting is the final product, the proposed technique is appropriate for efficient quality control of the data acquired and in aiding the parameterisation of the subsequent deghosting processing.     

Coal Mining Induced Seismicity in the Ruhr Area, Germany

Over the last 25 years mining-induced seismicity in the Ruhr area has continuously been monitored by the Ruhr-University Bochum. About 1,000 seismic events with local magnitudes between 0.7 ≤ M _L ≤ 3.3 are located every year. For example, 1,336 events were located in 2006. General characteristics of induced seismicity in the entire Ruhr area are spatial and temporal correlation with mining activity and a nearly constant energy release per unit time. This suggests that induced stresses are released rapidly by many small events. The magnitude–frequency distribution follows a Gutenberg–Richter relation which is a result from combining distributions of single longwalls that themselves show large variability. A high b-value of about 2 was found indicating a lack of large magnitude events. Local analyses of single longwalls indicate that various factors such as local geology and mine layout lead to significant differences in seismicity. Stress redistribution acts very locally since differences on a small scale of some hundreds of meters are observed. A regional relation between seismic moment M ₀ and local magnitude M _L was derived. The magnitude–frequency distribution of a single longwall in Hamm was studied in detail and shows a maximum at M _L = 1.4 corresponding to an estimated characteristic source area of about 2,200 m². Sandstone layers in the hanging or foot wall of the active longwall might fail in these characteristic events. Source mechanisms can mostly be explained by shear failure of two different types above and below the longwall. Fault plane solutions of typical events are consistent with steeply dipping fracture planes parallel to the longwall face and nearly vertical dislocation in direction towards the goaf. We also derive an empirical relation for the decay of ground velocity with epicenter distance and compare maximum observed ground velocity to local magnitude. This is of considerable public interest because about 30 events larger than M _L ≥ 1.2 are felt each month by people living in the mining regions. Our relations, for example, indicate that an event in Hamm with a peak ground velocity of 6 mm/s which corresponds to a local magnitude M _L between 1.7 and 2.3 is likely to be felt within about 2.3 km radius from the event.     

Geochemical and isotopic zoning patterns of plagioclase megacrysts in gabbroic dykes from the Gardar Province, South Greenland: implications for crystallisation processes in anorthositic magmas

Chemical and Sr isotopic zoning patterns in plagioclase megacrysts from gabbroic dykes in the Gardar Province can be used to elucidate magma-chamber and emplacement processes. The megacrysts occur either as single crystals or assembled as anorthosite xenoliths. The size of the megacrysts varies from <1 cm to 1 m. They consist of a large core with variable zonation (An_58-39) and a relatively small (<600 µm), normally zoned rim (An_62-27). The contact between core and rim is sharp and marked by a sharp increase in anorthite content which can reach 11 mol% An. This gap is interpreted as having formed during dyke emplacement due to a sudden pressure release. Some of the megacryst cores show a fairly constant composition whereas others exhibit an unusual wavy-oscillatory zoning which has not been reported elsewhere to our knowledge. The oscillatory zoning has wavelengths of up to 2,500 µm and a maximum amplitude of 7 mol% An. It is interpreted as reflecting movements of the crystals in the magma reservoir. The Sr isotopic composition of one crystal shows a radiogenic inner core ((⁸⁷Sr/⁸⁶Sr)_i=0.7044) and a less radiogenic outer core ((⁸⁷Sr/⁸⁶Sr)_i=0.7039-0.7036). The lack of a significant change between outer core and rim ((⁸⁷Sr/⁸⁶Sr)_i=0.7037) is consistent with formation of the more An-rich rim due to pressure release. Variations in the core may be related to movements of the crystal and/or magma mixing. A trace-element profile across a megacryst shows a small increase in Sr and small decreases in Ba and La contents of the recalculated melt composition across the core-rim boundary, whereas P, Ce, Nd and Eu remain constant. Melt compositional changes upon emplacement are therefore considered to be of minor importance. Constant ratios of incompatible trace elements in the megacryst cores indicate a dominant influence of a lower crustal source on trace-element budgets.     

High spatial-resolution monitoring to investigate nitrate export and its drivers in a mesoscale river catchment along an anthropogenic land-cover gradient

Nitrate monitoring is commonly conducted with low-spatial resolution, only at the outlet or at a small number of selected locations. As a result, the information about spatial variations in nitrate export and its drivers is scarce. In this study, we present results of high-spatial resolution monitoring conducted between 2012 and 2017 in 65 sub-catchments in an Alpine mesoscale river catchment characterized by a land-use gradient. We combined stable isotope techniques with Bayesian mixing models and geostatistical methods to investigate nitrate export and its main drivers, namely, microbial N turnover processes, land use and hydrological conditions. In the investigated sub-catchments, mean values of NO₃⁻ concentrations and its isotope signatures (δ¹⁵N_NO3 and δ¹⁸O_NO3) varied from 2.6 to 26.7 mg L⁻¹, from −1.3‰ to 13.1‰, and from −0.4‰ to 10.1‰, respectively. In this study, land use was an important driver for nitrate export. Very strong and strong positive correlations were found between percentages of agricultural land cover and δ¹⁵N_NO3, and NO₃⁻ concentration, respectively. Mean proportional contributions of NO₃⁻ sources varied spatially and seasonally, and followed land-use patterns. The mean contribution of manure and sewage was much higher in the catchments characterized by a high percentage of agricultural and urban land cover comparing to forested sub-catchments. Specific NO₃⁻ loads were strongly correlated with specific discharge and moderately correlated with NO₃⁻ concentrations. The nitrate isotope and concentration analysis results suggest that nitrate from external sources is stored and accumulated in soil storage pools. Nitrification of reduced nitrogen species in those pools plays the most important role for the N-dynamics in the Erlauf river catchment. Consequently, nitrification of reduced N sources was the main nitrate source except for a number of sub-catchments dominated by agricultural land use. In the Erlauf catchment, denitrification plays only a minor role in controlling NO₃⁻ export on a regional scale.     

Experimental impact cratering: A summary of the major results of the MEMIN research unit

This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two-stage light-gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane-driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high-temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.     

Helium-uranium dating of corals from Middle Pleistocene Barbados reef tracts

By He-U dating of corals from elevated Pleistocene reef tracts on Barbados, we have extended back to the Middle Pleistocene the high sea stand chronology previously deduced by Th²³⁰-U dating. Six samples from the first major reef tract complex older than the 200,000-yr complex gave ages of 350,000 ± 25,000 yr B.P. Two corals from the crest of Second High Cliff, an unusually large escarpment occurring approximately midway in the terrace sequence, gave concordant ages of 480,000 and 500,000 yr. Unrecrystallized corals from older reefs gave ages ranging back to 650,000 yr.The results date episodes of high sea stands at 350,000 and 500,000 yr B.P.     

Polyfluorinated compounds in waste water treatment plant effluents and surface waters along the River Elbe, Germany

Polyfluorinated compounds (PFCs) were investigated in waste water treatment plant (WWTP) effluents and surface waters of the River Elbe from samples collected in 2007. Concentrations of various PFCs, including C₄–C₈ perfluorinated sulfonates (PFSAs), C₆ and C₈ perfluorinated sulfinates, 6:2 fluorotelomer sulfonate, C₅–C₁₃ perfluorinated carboxylic acids (PFCAs), C₄ and C₈ perfluoroalkyl sulfonamides and 6:2, 8:2 and 10:2 unsaturated fluorotelomercarboxylic acids were quantified. ∑PFC concentrations of the river water ranged from 7.6 to 26.4 ng L⁻¹, whereas ∑PFC concentrations of WWTP effluents were approximately 5–10 times higher (30.5–266.3 ng L⁻¹), indicating that WWTPs are potential sources of PFCs in the marine environment. PFC patterns of different WWTP effluents varied depending on the origin of the waste water, whereas the profile of PFC composition in the river water was relatively constant. In both kinds of water samples, perfluorooctanoic acid (PFOA) was the major PFC, whereas perfluorobutane sulfonate (PFBS) was the predominant PFSA.     

Multi-Scale Texture Modeling

Patterns of crystallographic preferred orientation are referred to as texture. The specific subject of texture analysis is the experimental determination and interpretation of the statistical distribution of orientations of crystals within a specimen of polycrystalline material, which could be metals or rocks. The objective is to relate an observed pattern of preferred orientation to its generating processes and vice versa. In geosciences, texture of minerals in rocks is used to infer constraints on their tectono-metamorphic history. Since most physical properties of crystals, such as elastic moduli, the coefficients of thermal expansion, or chemical resistance to etching depends on crystal symmetry and orientation, the presence of texture imparts directional properties to the polycrystalline material. A major issue of mathematical texture analysis is the resolution of the inverse problem to determine a reasonable orientation density function on SO(3) from measured pole intensities on , which relates to the inverse of the totally geodesic Radon transform. This communication introduces a wavelet approach into mathematical texture analysis. Wavelets on the two-dimensional sphere and on the rotational group SO(3) are discussed, and an algorithms for a wavelet decomposition on both domains following the ideas of Ta-Hsin Li is given. The relationship of these wavelets on both domains with respect to the totally geodesic Radon transform is investigated. In particular, it is shown that the Radon transform of these wavelets on SO(3) are again wavelets on . A novel algorithm for the inversion of experimental pole intensities to an orientation density function based on this relationship is developed.     

Taphonomic analysis of small mammal bone remains preyed upon by wildcats (Carnivora: Felidae) from the central Monte Desert (Mendoza,Argentina)

The present study analysed the taphonomic characteristics of small mammal bone accumulations produced by small felids in an area from the central Monte Desert (Mendoza, Argentina). In order to provide criteria to identify the role that these predators had in the formation of zooarchaeological assemblages, the anatomical representation, bone breakage patterns and degrees of digestive corrosion were evaluated. The main taphonomic results are: low average values for the relative abundance of skeletal elements; greater representation of mandibles, maxillae, isolated incisors, humeri and femora than the remaining elements; preponderance of cranial elements with high proportion of isolated teeth; elevated frequencies of proximal limb bones compared with distal parts; high degree of breakage in all skeletal elements and digestive corrosion on almost all diagnostic bones (mainly moderate and heavy). The values of the studied taphonomic variables indicate that small felids in this area made severe alterations to the bones of their prey (mainly rodents), attributable to the category of extreme modifier, while preserving enough skeletal elements to allow their taphonomic characterization. Tooth marks or grooves on bone surfaces produced by scratching and chewing were not detected. The low relative abundance of skeletal elements, the high degree of breakage and the elevated frequency of elements with digestion traces represent general taphonomic patterns that fall within those reported for other South American small carnivores.     

Quantifying Arctic contributions to climate predictability in a regional coupled ocean-ice-atmosphere model

The relative importance of regional processes inside the Arctic climate system and the large scale atmospheric circulation for Arctic interannual climate variability has been estimated with the help of a regional Arctic coupled ocean-ice-atmosphere model. The study focuses on sea ice and surface climate during the 1980s and 1990s. Simulations agree reasonably well with observations. Correlations between the winter North Atlantic Oscillation index and the summer Arctic sea ice thickness and summer sea ice extent are found. Spread of sea ice extent within an ensemble of model runs can be associated with a surface pressure gradient between the Nordic Seas and the Kara Sea. Trends in the sea ice thickness field are widely significant and can formally be attributed to large scale forcing outside the Arctic model domain. Concerning predictability, results indicate that the variability generated by the external forcing is more important in most regions than the internally generated variability. However, both are in the same order of magnitude. Local areas such as the Northern Greenland coast together with Fram Straits and parts of the Greenland Sea show a strong importance of internally generated variability, which is associated with wind direction variability due to interaction with atmospheric dynamics on the Greenland ice sheet. High predictability of sea ice extent is supported by north-easterly winds from the Arctic Ocean to Scandinavia.